Port details |
- adns Easy to use asynchronous-capable DNS client library and utilities
- 1.6.0 dns =53 1.6.0Version of this port present on the latest quarterly branch.
- Maintainer: pi@FreeBSD.org
- Port Added: 2003-09-05 04:55:22
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: freetype2, gmake, expat, unzip, pcre
- License: GPLv3
- WWW:
- https://www.chiark.greenend.org.uk/~ian/adns/
- Description:
- adns is a resolver library for C (and C++) programs. In contrast with
the existing interfaces, gethostbyname et al and libresolv, it has the
following features:
* It is reasonably easy to use for simple programs which just want
to translate names to addresses, look up MX records, etc.
* It can be used in an asynchronous, non-blocking, manner. Many
queries can be handled simultaneously.
Technical note: adns requires a real nameserver like BIND or
Dents running on the same system or a nearby one, which must be
willing to provide `recursive service'. I.e., adns is a `stub
resolver'.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- To install the port:
- cd /usr/ports/dns/adns/ && make install clean
- To add the package, run one of these commands:
- pkg install dns/adns
- pkg install adns
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: adns
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1597925576
SHA256 (adns-1.6.0.tar.gz) = fb427265a981e033d1548f2b117cc021073dc8be2eaf2c45fd64ab7b00ed20de
SIZE (adns-1.6.0.tar.gz) = 323474
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- m4>=1.4.11 : devel/m4
- gmake>=4.3 : devel/gmake
- This port is required by:
- for Libraries
-
- dns/fastresolve
- dns/py-adns
- mail/mailfromd
- textproc/modlogan
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:
- ===> The following configuration options are available for adns-1.6.0:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
- Options name:
- dns_adns
- USES:
- cpe gmake
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.6.0 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
1.6.0 20 Jul 2022 14:21:47 |
Tobias C. Berner (tcberner) |
dns: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Samorukov <samm@freebsd.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Allan Jude <allanjude@freebsd.org>
* Amar Takhar <verm@drunkmonk.net>
* Anders Nordby <anders@fix.no>
* Andrew Greenwood <greenwood.andy@gmail.com>
* Anton Berezin <tobez@FreeBSD.org>
* Ashish SHUKLA <ashish@FreeBSD.org>
* Attila Nagy <bra@fsn.hu> (Only the first 15 lines of the commit message are shown above ) |
1.6.0 08 Oct 2021 09:03:12 |
Bernhard Froehlich (decke) |
dns/adns: Add CPE information
Approved by: portmgr (blanket) |
1.6.0 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.6.0 20 Aug 2020 15:01:08 |
zeising |
dns/adns: Update to 1.6.0
Update dns/adns to 1.6.0.
This fixes several security issues in adns.
This fixes the build with -fno-common, which is the default with llvm 11.
PR: 248780
Approved by: pi@ (maintainer)
MFH: 2020Q3
Security: 08de38d2-e2d0-11ea-9538-0c9d925bbbc0 |
1.5.1 14 Jan 2018 21:38:50 |
bapt |
Remove wrong build dependency on m4
The only thing that depends on m4 is for building the testsuite, not the regular
program |
1.5.1 02 Dec 2016 11:58:22 |
mat |
Do not use post-stage. Use post-install instead.
The only reason to use post-stage is because the port needs to do
"things" at a later time, like some plist manipulation.
While there, fold post-install in do-install targets when they are
defined.
PR: 214780
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight |
1.5.1 21 Aug 2016 19:50:57 |
pi |
dns/adns: 1.5.0 -> 1.5.1
- Portability fix for systems where socklen_t is bigger than int.
- Fix for malicious optimisation of memcpy in test suite, which
causes failure with gcc-4.1.9 -O3. See Debian bug #772718.
- Fix TCP async connect handling. The bug is hidden on Linux and on most
systems where the nameserver is on localhost. If it is not hidden,
adns's TCP support is broken unless adns_if_noautosys is used.
- Fix addr queries (including subqueries, ie including deferencing MX
lookups etc.) not to crash when one of the address queries returns
tempfail. Also, do not return a spurious pointer to the application
when one of the address queries returns a permanent error (although,
the application almost certainly won't use this pointer because the
associated count is zero).
- adnsresfilter: Fix addrtextbuf buffer size. This is not actually a
problem in real compiled code but should be corrected.
- Properly include harness.h in adnstest.c in regress/. Suppresses
a couple of compiler warnings (implicit declaration of Texit, etc.) |
1.5.0 01 Apr 2016 14:00:57 |
mat |
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight |
1.5.0 26 Aug 2015 18:22:33 |
amdmi3 |
- Switch to options helpers
- DOCS is not needed in OPTIONS_DEFAULT
Approved by: portmgr blanket |
1.5.0 09 May 2015 08:43:00 |
pi |
dns/adns: pet PORTSCOUT |
1.5.0 08 May 2015 11:00:34 |
pi |
dns/adns: Add another weird version number to PORTSCOUT, fix patches |
1.5.0 22 Nov 2014 13:25:49 |
pi |
dns/adns: 1.5.0rc0 -> 1.5.0
Changes since 1.4:
http://www.chiark.greenend.org.uk/pipermail/adns-announce/2014/000002.html |
1.5 25 Oct 2014 12:09:31 |
pi |
dns/adns: 1.4 -> 1.5.0~rc0
New features:
* Support for queries about IPv6 data in all applicable adns
query types (including AAAA, PTR, and adns_r_addr queries).
(Thanks very much to Mark Wooding.)
* Support for transport over IPv6. (Thanks to Mark Wooding again.)
* adns_addr2text and adns_text2addr: Convenient functions for
converting between addresses and address literals.
Bugfixes:
* Fix a crashing bug in adnslogres. (Debian#392102.)
* Do all checks of checked PTR owner name before actually sending the
query, and reject IPv4 PTR owner names whose labels have leading zero
digits or values >255. (Only the first 15 lines of the commit message are shown above ) |
1.4_2 23 Sep 2014 20:20:13 |
pi |
dns/adns: include lucab's ipv6 patch, take maintainership
PR: 178364
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> |
1.4_1 15 Jul 2014 23:11:13 |
adamw |
Add OPTIONS_DEFINE=DOCS for ports with %%PORTDOCS%% in the plist.
Where possible, correct a few instances where PORTDOCS was being used
to flag stuff in EXAMPLESDIR. For some ports, mostly those owned by
ruby@, PORTDOCS is applied to pretty much everything whether it's
documentation or example. |
1.4_1 10 Oct 2013 00:03:44 |
madpilot |
- Convert to staging
- Convert to USES=gmake |
1.4_1 26 Sep 2013 19:22:08 |
eadler |
I no longer have specific need for this port and would prefer to maintain fewer
ports. |
1.4_1 20 Sep 2013 16:31:58 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
dns) |
1.4_1 16 Jul 2013 21:59:48 |
eadler |
Remove now excess verbiage.
Reviewed by: bapt |
1.4_1 06 Jul 2013 17:27:41 |
eadler |
Convert some of my ports from USE_GMAKE to USES=gmake.
The remainder have other pending patches which I must finish before conversion. |
1.4_1 20 Oct 2012 15:36:47 |
eadler |
Convert to OptionsNG
Feature safe: yes |
1.4_1 06 Oct 2012 14:35:46 |
eadler |
Trim the headers in the ports I maintain. |
1.4_1 25 Jul 2012 06:32:08 |
cs |
Fix typos in COMMENT |
1.4_1 21 Aug 2011 20:51:40 |
eadler |
- change the email address I use to maintain ports
Approved by: bapt (mentor) |
1.4_1 21 Aug 2011 16:12:46 |
eadler |
- change the email address I use to maintain ports
Approved by: bapt (mentor) |
1.4_1 03 Aug 2011 04:17:20 |
linimon |
Assign to new volunteer.
PR: ports/159394
Submitted by: ports@eitanadler.com |
1.4_1 16 Jun 2011 06:17:32 |
bapt |
ftp master site no more available |
1.4_1 20 Mar 2011 12:54:45 |
miwi |
- Get Rid MD5 support |
1.4_1 24 Mar 2009 12:20:45 |
mm |
- Mark MAKE_JOBS_SAFE for SMP compilation |
1.4_1 09 Mar 2009 19:29:12 |
miwi |
- Reset farrokhi@freebsd.org due to long period of inactivity.
Approved by: portmgr (linimon) |
1.4_1 21 Aug 2007 01:33:57 |
rafan |
- Add a patch for chained CNAME
PR: ports/115297
Submitted by: rafan
Approved by: farrokhi (maintainer)
Obtained from: http://hugo.vulcano.cl/development/adns-cc |
1.4 08 Nov 2006 09:28:33 |
farrokhi |
Change my email address to farrokhi@ in all ports that I maintain.
Approved by: miwi (mentor) |
1.4 01 Nov 2006 06:45:08 |
miwi |
- Update to 1.4
- INSTALLS_SHLIB -> USE_LDCONFIG
PR: ports/104801
Submitted by: Babak Farrokhi <babak@farrokhi.net> (maintainer) |
1.3_1 04 Jul 2006 12:20:32 |
arved |
Fix installation of libadns.so.1
Bump PORTREVISION
Reported by: Johan Bergs <johan.bergs@ua.ac.be>
Submitted by: "Babak Farrokhi" <babak@farrokhi.net>
Pointy hat to: arved |
1.3 02 Jul 2006 16:24:08 |
stefan |
- Update to 1.3.
- Assign maintainership to submitter.
PR: 99434
Submitted by: Babak Farrokhi <babak@farrokhi.net>
Approved by: arved (mentor) |
1.2_1 24 Apr 2006 02:43:52 |
marcus |
Fix the adns library version so it matches the internal soname. This sets
the lib version back to 1, but since the dependencies still linked to
libadns.so.1 even when the installed file was libadns.so.12, a new
PORTREVISION bump is not needed. |
1.2 20 Apr 2006 14:01:32 |
sem |
- Update to version 1.2
- Respect NOPORTDOCS
- Add a HTTP master site
PR: ports/96096
Submitted by: Martin Matuska <martin@matuska.org> |
1.1 24 Nov 2005 01:44:33 |
pav |
- Add SHA256 |
1.1 18 Jan 2005 22:04:02 |
clement |
- Update to 1.1 |
1.0_1 05 Dec 2004 05:13:21 |
linimon |
With portmgr hat on, reset bouncing maintainer address. All of the commits
within the last year have been with maintainer timeouts, as well. |
1.0_1 13 Aug 2004 18:17:01 |
pav |
- Fix build with gcc-3.4
PR: ports/70305
Submitted by: keramida |
1.0_1 31 Mar 2004 03:12:58 |
trevor |
SIZEify (maintainer timeout) |
1.0_1 04 Feb 2004 05:21:48 |
marcus |
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2) |
1.0 24 Sep 2003 09:37:11 |
osa |
Make portlint(1) happy by changing strip to ${STRIP_CMD}
Submitted by: Oleg Karachevtsev <ok@etrust.ru>
PR: 56998 |
1.0 05 Sep 2003 04:54:37 |
edwin |
Massive repo-copies request: net->dns (partly devel->dns)
PR: ports/56020
Submitted by: Kimura Fuyuki <fuyuki@nigredo.org>
Approved by: portmgr |