audio/faad: Update to 2.11.1

Changelog: https://github.com/knik0/faad2/releases/tag/2.11.1

audio/faad: Update to upstream version 2.10.1

MFH:		2022Q4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

audio: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <dmagda+libsamplerate@ee.ryerson.ca>
  *  <trasz@FreeBSD.org>
  *  Adam Weinberger
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aleksander Fafula <alex@bsdguru.org>
  *  Alex Allan <alex@kamaz.org.uk>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Vereeken <Alexander88207@protonmail.com>

audio/faad: Add CPE information

Approved by:    portmgr (blanket)

audio/faad: Update to 2.10.0.

Details:
- Update to upstream version 2.10.0.
- Follow upstream development to the GitHub page.
- Remove references to the now-defunct former project page:
  http://www.audiocoding.com/

PR:		254711
Reported by:	pi
MFH:		2021Q2

Remove # $FreeBSD$ from Makefiles.

- Switch to USES=localbase
- Update WWW

Approved by:	portmgr blanket

Fix build on several architectures (ensure __builtin_bswap16 is available)

PR:		229339
Submitted by:	tobik
MFH:		2018Q3

Mark ports broken on mips64 that are already broken on powerpc64.  In
most cases, the failure mode is the same.  Also, mark them broken on
mips when necessary.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Mark ports broken on powerpc64, categories a-c.

While here, pet portlint and do some other cleanup.

Approved by:	portmgr (tier-2 blanket)

Update to upstream version 2.8.8; fix build with multimedia/libquicktime

Details:
- Update to upstream version 2.8.8
- Use REINPLACE_CMD to set FAAD2_VERSION definition for consumers like
  multimedia/libquicktime.
  This is, however, no longer supported upstream, see
  https://sourceforge.net/p/faac/bugs/236/
  In future, consumers need to change their detection mechanism for faad2

PR:		224464
Submitted by:	mi

Update to upstream version 2.8.6

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

Add LICENSE*, minor cleanups, bump PORTREVISION

PR:		209960
Submitted by:	takefu@airport.fm
Reviewed by:	riggs

Remove $FreeBSD$ from patches files in categories a-j.

With hat:	portmgr
Sponsored by:	Absolight

audio category: Remove $PTHREAD_LIBS

xmcd didn't pass check-plist (pre-existing), fixed.

approved by:	PTHREAD blanket

Convert to USES=autoreconf

Remove redundant pre-configure (USE_AUTOTOOLS already contains libtoolize)

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

Convert to USES=dos2unix
While here stagify some of the ports
Modernize LIB_DEPENDS
Extract zip with bsdtar when possible

Allow packageing as a user[1]
While where strip the final library[2]

Reported by:	danfe [1], stage-qa [2]

Remove the MAN1 macro leftovers

Reported by:	bsam

Convert to stage
Remove useless pre/post dancing

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Add stdin support from:

http://svn.slimdevices.com/slim/7.3/trunk/vendor/faad2/bpa-stdin.patch

This is required to allow BBCiPlayer support in audio/squeezeboxserver.

PR:             ports/138213
Submitted by:   Mark Knight <markk at knigma dot org>
Feature safe:   yes

Fix sourceforge

Submitted by:   pointyhat

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Fix the build on -CURRENT by removing an inline function prototype.

- Add MAKE_JOBS_SAFE to support SMP compilation

- Bump PORTREVISION for previous -fPIC fix, otherwise it's invisible

Missed by:      beech

- Add PIC flags to fix 64 Bit build

Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
Reported by:    pointyhat via pav

- Update to version 2.7

PR:             131829
Submitted by:   ports fury

- Fix a heap-based buffer overflow in the command-line frontend. It allows
  remote attackers to cause a denial of service (crash) and possibly execute
  arbitrary code via a crafted MPEG-4 (MP4) file.

PR:             ports/128512
Submitted by:   bf <bf2006a@yahoo.com>
Security:       http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-4201

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Remove USE_GETOPT_LONG which is a no-op since March 2007

Update to 2.6.1

Remove the drm, which drm causes faac/faad to not be able get mplayer and
other applications function correct. Bump the PORTREVISION.

Reported by:    a few in freebsd-multimedia@
Approved by:    portmgr (marcus)

Update to 2.6

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

Fix the build on FreeBSD 4.x.

PR:             ports/102572
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Mark BROKEN on 4.x

Reported by:    kris via pointyhat

Remove PATCH_DEPENDS and rename the post-patch target to pre-configure. It
makes more sense. Should fix the build in a few of other tinderboxes, but
I don't understand why it works for pointyhat thought.

Reported by:    novel

- Update to 2.5

- Transfer MAINTAINER to multimedia@

Approved by:    dhw (postmaster, for using multimedia@ as maintainer)
                gnome (gstreamer ports)

- Make portlint happy

PR:     ports/95829
Submitted by:   Alexander Botero-Lowry <alex@foxybanana.com>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Change the pre-patch: build-depends to PATCH_DEPENDS= ${BUILD_DEPENDS} to make
  sure we have libtool and stuf for post-patch

Reported by:    kris

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Add SHA256
- Add SIZE to a few ports

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Fix build with new lrintf math functions [1]
- Simplify COMMENT
- Update pkg-desc

Submitted by:   Dan Larsson [1]

Remove old MPEG4IP knobs that are not used anymore

Pointed out by: lofi

Use newer version of autoconf/autoheader (259)

Submitted by:   paulbeard@mac.com

o Have faad depend on mpeg4ip-libmp4v2 so mpeg4ip can use faad
o Bump PORTREVISION

PR:             72205
Submitted by:   ahze

Change email to new FreeBSD.org address

Approved by:adamw (mentor)

Fix the build on amd64.

PR:             ports/72943
Reported by:    pointyhat via kris
                sean@mcneil.com
Submitted by:   sean@mcneil.com (patch)
                Michael Johnson <ahze@ahze.net> (maintainer)
Tested by:      sean@mcneil.com

Only define WITHOUT_MPEG4IP for >=502126 and if you don't already have mpeg4ip
previously installed. This is also only a temp fix until mpeg4ip is updated
(ports/72206) or fixed.

PR:             ports/72799
Submitted by:   Michael Johnson <ahze@ahze.net> (maintainer)
Pointed out by: spamrefuse@yahoo.com

Disable depend on mpeg4ip until new mpeg4ip is committed. The current mpeg4ip
is broke, so disable this to allow other apps to get build with faad.

Requested by:   Michael Johnson <ahze@ahze.net> (maintainer)

Backout previous commit because the rest of the updates can't be
tested because I'm still on 5.2.1 and I can't compile gcc34 and the
only packages for gcc34 I find are 4.10 or 5.3. Bummer!

Backout previous commit because the rest of the updates can't be
tested because I'm still on 5.2.1 and I can't compile gcc34 and the
only packages for gcc34 I find are 4.10 or 5.3. Bummer!

[MAINTAINER] audio/faad2: Patch for new mpeg4ip [2 of 4]

        - make faad use libmp4v2 so mpeg4ip can use faad.

PR:             ports/72205
Submitted by:   Michael Johnson <ahze@ahze.net>

Fix WWW line

PR:             ports/71597
Submitted by:   maintainer

Set NO_CDROM due to licensing restrictions.

PR:             ports/71655
Submitted by:   Michael Johnson <ahze at ahze dot net> (maintainer)
Approved by:    portmgr (implicit)

- Only use SDL support if WITHOUT_MPEG4IP is not defined

PR:             ports/71041
Pointed out by: <ingmar.gebert@stud.uni-rostock.de>
Submitted by:   Michael Johnson <ahze@ahze.net> (maintainer)

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Sync with new bsd.autotools.mk

- Switch to MASTER_SITE_SOURCEFORGE_EXTENDED

PR:             ports/67190
Submitted by:   michael johnson <ahze@ahze.net> (maintainer)

- Fix decoding files on AMD64 [1]
- Fix mess with plist files
- Bump PORTREVISION

PR:             ports/67060 [1]
Submitted by:   tjr [1], krion [2]
Approved by:    maintainer

- Fix install if WITHOUT_MPEG4IP is defined but it's installed.

PR:             ports/66723
Submitted by:   maintainer

- Update to 2.0 release
- Use external mpeg4ip, provide knob to use internal one

PR:             ports/66598
Submitted by:   michael johnson <ahze@ahze.net> (maintainer)

- configure --with-drm
- Makefile cleanup
- Pass maintainership to submitter

PR:             ports/66543
Submitted by:   michael johnson <ahze@ahze.net>
Approved by:    maintainer

- Fix typo in PORTREVISION

- Install systems.h header. This will help faac to build independently.

PR:             ports/66360
Submitted by:   michael johnson <ahze@ahze.net>
Approved by:    maintainer

Make it work on 64bit platforms.

PR:             64964
Submitted by:   tjr
Obtained from:  faad CVS

- Mark IGNORE for amd64, it builds but does not work properly.

PR:             ports/64964
Submitted by:   tjr
Approved by:    maintainer

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update to 2.0.

Submitted by:   Simon Barner <barner@in.tum.de>
Approved by:    maintainer

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

portlint (whitespace cleanup)

unbreak for -CURRENT.
respect CFLAGS.

Use ${MASTER_SITE_SOURCEFORGE} and USE_GETOPT_LONG

Approved by:    maintainer
PR:             50798

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Avoid buffer overflow in option processing and bump PORTREVISION.

Obtained from:  OpenBSD

o Fix build when GNU auto* tools are previously installed by forcing
  build-depends target to happen in pre-patch stage
o Check Makefile comments for more information

PR:             52455
Submitted by:   David Yeske <dyeske@yahoo.com>
Approved by:    maintainer (timeout 2 weeks)

Link with CXX to avoid missing symbols in library implemented in C++.

Approved by:     maintainer

De-pkg-comment.

New port faad version 1.1: A LC, MAIN and LTP profile, MPEG2 and
MPEG-4 AAC decoder

PR:             46884
Submitted by:   Sean McGovern <sean@sfarc.net>