*/*: Remove GNU_CONFIGURE_MANPREFIX

After 9fd7ee1cdf6c remove GNU_CONFIGURE_MANPREFIX from my ports.

*/*: Move manpages to share/man

Approved by:	portmgr (blanket)

archivers/gtar: fix build on i386

Override a hidden safety check that stops the build on platforms
that are not Y2038 safe.  FreeBSD/i386 still has a 32-bit time_t.

PR:		272622
Reported by:	cy

archivers/gtar: update to bugfix release 1.35

archivers/gtar: switch the default archive to stdin/stdout

The gtar port tries to use the same default archive location as the
base system tar.  Starting with libarchive 3.6.0, bsdtar defaults
to reading/writing the archive from stdin/to stdout in the common
case where the /dev/sa0 device does not exist on a system.

Using "-" as the default archive file is also the GNU upstream
default.

PR:		271260
Reported by:	Michael Stone <mstone2001@msn.com>

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

archivers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Albert Vernon <f3cun3c02@sneakemail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Kuehn <freebsd@nagilum.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Anders Nordby <anders@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

archivers/gtar: update to bugfix release 1.34

Remove support for FreeBSD 12.1 from various ports.

FreeBSD 12.1 reached end-of-life today. Adjust the message
for the wine ports while here, since stable/13 has branched.

Submitted by:	rene
Reviewed by:	jbeich, mandree, mat, osa
Approved by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D28406

archivers/gtar: update to 1.33

Noteworthy changes:
* POSIX extended format headers do not include PID by default
* --delay-directory-restore works for archives with reversed member ordering
* Fix extraction of a symbolic link hardlinked to another symbolic link
* Wildcards in exclude-vcs-ignore mode don't match slash
* Fix the --no-overwrite-dir option
* Fix handling of chained renames in incremental backups
* Link counting works for file names supplied with -T
* Accept only position-sensitive (file-selection) options in file list files

Update to 1.32 for some bug and testsuite fixes.

Update to 1.31.  Noteworthy changes:
* Support for zstd compression (if zstd is installed).
* The -K option interacts properly with member names given on the command line.
* Fix handling of file shrinkage during read access when --sparse is used.

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Update to 1.30.  Noteworthy changes:
* Member names containing '..' components are now skipped when extracting.
* Report erroneous use of position-sensitive options.
* --numeric-owner now affects private headers too.
* Fixed the --delay-directory-restore option
* The --warnings=failed-read option
* The --warnings=none option now suppresses all warnings
* Fix reporting of hardlink mismatches during compare

Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)

- Fix license
- Switch to USES=localbase
- Switch to ${TOUCH}

PR:		210637
Approved by:	naddy@FreeBSD.org (maintainer)

Work around a bug in FreeBSD 9 make(1).
http://docs.freebsd.org/cgi/mid.cgi?slrnmvro62.94q.naddy

PR:		210100
Reported by:	vas@mpeks.tomsk.su

Do not attempt to rebuild tar.info after patching configure.
I can't reproduce this on 10.3, but have a report from 9.3.
Differences in make(1)?

Reported by:	Rob Levandowski <robl@macwhiz.com>

Update to 1.29.  User-visible changes:
* New options: --verbatim-files-from, --no-verbatim-files-from
* --null option reads file names verbatim
* New options: --owner-map=FILE and --group-map=FILE
* New option --clamp-mtime
* Deprecated --preserve option removed

Use the new test framework in my ports, if applicable.
While here, also strip more libraries.

- Switch to options helpers

Approved by:	portmgr blanket

Remove $FreeBSD$ from patches files in categories a-j.

With hat:	portmgr
Sponsored by:	Absolight

Add CPE information.

Split devel/gettext in devel/gettext-runtime and devel/gettext-tools.  The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt.  Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.

USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools.  USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.

Update gettext to 0.19.3.

Remove :oldver from converters/libiconv and devel/gettext-runtime.  Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports.  When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.

Fix some ports that installed files in lib/locale instead of share/locale.

PR:		194038
Reviewed by:	bapt
Exp-run:	antoine
Approved by:	portmgr (antoine)

Clean up plist

Update to 1.28.  Noteworthy changes in this release:
* New checkpoint action: totals
* Extended checkpoint format specification.
* New option --one-top-level
* New option --sort
* New exclusion options
* Manpages

Allow to build with texinfo from ports

Add USES=charsetfix

Update to 1.27.1.  Bug fixes:
* Fix unquoting of file names obtained via the -T option.
* Fix GNU long link header timestamp (backward compatibility).
* Fix extracting sparse members from star archives.

PR:		189675
Submitted by:	Jason Harris <jharris@widomaker.com>

USE_BZIP2 -> USES+=tar:bzip2
USE_XZ    -> USES+=tar:xz

Fix properties on pkg-plist

Use MAKE_CMD to run regression tests.

* Regenerate patch to fix harmless but confusing warning.
* Add license information.

PR:		183987
Submitted by:	Rodrigo Osorio <rodrigo@bebik.net>

Update to 1.27.

Fix dependencies for STATIC option.

Convert to stage and option helpers.
Fix combination of NLS and STATIC options.

Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)

Simplify by dropping workarounds for unsupported FreeBSD versions.

For all my ports
* remove MAKE_JOBS_SAFE (default now)
* change USE_GMAKE=yes to USES=gmake

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Convert to OptionsNG and trim Makefile headers.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to bugfix release 1.26.

Allow building as root.

PR:             155553

Fix bug with --one-file-system and --listed-incremental.
This is important for at least misc/amanda-client.

Submitted by:   John Hein <jhein@symmetricom.com>
Obtained from:  upstream

Update to 1.25, which mostly brings miscellaneous bug fixes.

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Fix dead loop on extracting existing symlinks with the -k option.

Submitted by:   John Hein <jhein@symmetricom.com>
Obtained from:  upstream

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

The xz utils and lzma library have been imported into base, so make
the dependency on the archivers/xz port conditional on OSVERSION.

Update to 1.23: miscellaneous bug fixes and minor additions.

Fix a buffer overflow in the rmt client functionality.
From upstream.

Security:       c175d72f-3773-11df-8bb8-0211d880e350

Fix a geline() segfault on 8.0 when using --listed-incremental.

Submitted by:   Dennis Noordsij <noordsij@cs.helsinki.fi>

You can now use -J to (un)compress xz format files (.tar.xz, .txz).

Feature safe:   yes

Mark MAKE_JOBS_SAFE for SMP compilation.

PR:             133014
Submitted by:   mm

Update to 1.22 which adds --xz/-J support for xz compression.
However, xz itself does not have a stable release yet, so don't force
a runtime dependency.

* Update to 1.21.  Notable changes:
  - Some new flags, e.g. -J for lzma compression and --lzop.
  - transformation scope flags
  Testsuite fixes from upstream CVS.

* Drop workarounds for no longer supported FreeBSD releases.

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Rename manual "test" target to "regression-test" so that it will
be automatically run on the package build cluster.

Suggested by Pedro <pfgshield-freebsd@yahoo.com>.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Revert previous workaround, 8.0-CURRENT has grown fdopendir(3).

- Update to 1.20.
  Notable changes: This release adds support for lzma compression
  and the -a option to select the compression algorithm based on
  the suffix of the archive file name.

Work around the assumption that openat() implies the existence of
fdopendir().  FreeBSD 8 has the former, but not the latter.

PR:             122433

Update to 1.19.  Changes in this releases:
* new option --exclude-vcs
* miscellaneous bug fixes

Fix directory traversal vulnerability.

PR:             115914
Submitted by:   Nick Barkas <snb@threerings.net>
Security:      
http://www.vuxml.org/freebsd/d944719e-42f4-4864-89ed-f045b541919f.html

Update to 1.18.  Switched to GPLv3, no user visible changes.

PR:             115548
Submitted by:   rafan

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Fix message catalog directories.

Submitted by:   kris    (pointyhat)

Update to 1.17.  Changes in this release:
* Fix archivation of sparse files in posix mode.
* Fix operation of --verify --listed-incremental.
* Fix --occurrence.
* Scope of --transform and --strip-components options.
* End-of-volume script can send the new volume name to tar.

Update to 1.16.1.  User-visible changes:
* New option --exclude-tag allows to specify "exclusion tag files".
* The --exclude-cache option now excludes the directories themselves, too.
* Support for reading ustar type 'N' logical records has been removed.
* Race conditions around 'tar -x --same-owner' have been fixed.

Fix GNUTYPE_NAMES directory traversal vulnerability by not extracting
these entries.  Support for GNUTYPE_NAMES will be dropped completely
in 1.16.1.

Notified by sem@

Security:       VuXML 3dd7eb58-80ae-11db-b4ec-000854d03344

dirrmtry some directories which will be leftover on deinstall.

Notified by:    My tinderbox

Update to 1.16.  User-visible changes:

Incompatible changes:
* No globbing by default when extracting from or listing an archive.
* -l is now an alias of --check-links

Miscellaneous new options and bug fixes.  For a complete list, see
http://lists.gnu.org/archive/html/bug-tar/2006-10/msg00031.html

Fix build on 4.x.

PR:             94084
Submitted by:   Tod McQuillin <devin@spamcop.net>

Fix a buffer overflow, caused by improper bounds checking of the
PAX extended headers.  By tricking a user into processing a specially
crafted tar archive, this could be exploited to execute arbitrary
code with the privileges of the user.

Security:       CVE-2006-0300
Approved by:    portmgr (erwin)
Obtained from:  Ubuntu

SHA256ify

Approved by:    krion@

Fix command line parsing.

Submitted by:   Jiri Pridal <jiri.pridal@jmk.izscr.cz>
Obtained from:  GNU CVS

Update to 1.15.1.  Notable changes:
- Compressed archives are now recognized automatically.
- Numerous bug fixes.

Add a target "test" to run the included regression test suite.

Remove USE_GETTEXT

Support WITHOUT_NLS

Update to 1.14, the first new official release in almost five years.
No user-visible changes from the last alpha version.

Update to 1.13.94 and jettison private FreeBSD modifications.

Notable changes in this release:
- Support for POSIX.1-2001 and ustar archive formats.
- Various option flag changes.
- New message translations.
- Bug fixes.

Add size data, approved by maintainers.

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

introduce MASTER_SITE_GNU_ALPHA

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

Utilize INFO and bump PORTREVISION.

IGNORE while this is identical to the base system tar.

Suggested by:   kuriyama

pkg-comment -> COMMENT

Removed stale master_site, informed maintainer.
Noticed by: portsurvey.

Fix a security bug that allows extracted filenames to contain ".." and
bump PORTREVISION.

Submitted by:   naddy

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

Sync with src/contrib/tar - re-enable --same-owner for uid 0.

Sync with src/contrib/tar - don't assume that user with uid 0 doesn't really
care about umask(2).

Unbroke on systems without <langinfo.h>.

PR:             38891
Submitted by:   Lev Serebryakov <lev@serebryakov.spb.ru>

Stage 1 of system GNU tar upgrade to a modern version:

Merge all applicable bugfixes, local hacks and new features from the ancient
base system tar into the port, so those two are interchangeable.

Bump PORTREVISION.