x11-toolkits/lesstif: use ${PREFIX}/share/man

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>

*/*: Remove redundant '-*' from CONFLICTS definitions

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

x11-toolkits/lesstif: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

- disable support for libXp
PR:		240923
Submitted by:	Niclas Zeising

Convert to UCL & cleanup pkg-message (categories x)

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

- add LICENSE

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket, kwm (for gnome@ ports)

- fix order in USES

- Convert to USES=libtool
- Avoid USE_AUTOTOOLS
- Fix detection of fontconfig and freetype

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- sort pkg-plist
- cleanup symlink

- new USES=

- update LIB_DEPENDS

- use STAGEDIR
- remove IS_INTERACTIVE

- fix misplaced NO_STAGE in slaveports and ifdefs

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

- update WWW

- cleanup header
- strip shlibversion in depedency

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Kick MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- remove obsolte patch, it was included upstream.

- Switch SourceForge ports to the new File Release System: categories starting
with X

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- use freetype2

- update to 0.95.2

- record xextproto as explicit dependency

- fix include for gcc43
Obtained from:  fedora.redhat.com

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- clean X11BASE

- set USE_XORG

Remove always-false/true conditions based on OSVERSION 500000

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

Update to the autotools new world order.

Tested by:      numerous package build runs
Approved by:    portmgr
Thanks to:      des, kris, linimon, pav

- use PACKAGE_BUILDING

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Convert to USE_LDCONFIG

Approved by:    dinoex (maintainer)

- take mainatinership

- unbreak package build
backout USE_LDCONFIG

Reported by: pointyhat
2006 Aug 28 06:08:20    lesstif-0.95.0,2.log            libdata/ldconfig/lesstif
2006 Aug 25 01:30:35    lesstif-0.95.0,2.log            libdata/ldconfig/lesstif
2006 Aug 23 10:13:56    lesstif-0.95.0,2.log            libdata/ldconfig/lesstif
http://pointyhat.freebsd.org/errorlogs/amd64-7-latest/lesstif-0.95.0,2.log

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

- udpate to 0.95.0
- switch to bzip2 copmressed source
- enable package on pointyhat

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Try to remove the aclocal19 directory, which we may have created.

- Style: ports@freebsd.org -> ports@FreeBSD.org

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- add SHA checksum

- Update to 0.94.4
http://www.lesstif.org/ReleaseNotes.html

- Update to 0.94.2
http://www.lesstif.org/ReleaseNotes.html

- catch up autoconf changes

- update to 0.94.0
xpdf works with this version again

- update libtool

- fix the automake update from ade

Kill off automake18, switching to automake19.  Requiem Mors Pacem.

- update to 0.93.97

- update to 0.93.96

- mark FORBIDDEN

- drop maintainership

- It was not forgotten, as no port package could be build!

- bump PORTEPOCH

Forgotten by:   dinoex

- backout incomplete update

- update to 0.93.95b

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Autotools cleanup.  Remove autoconf257 (259), automake17 (18), and
libtool14 (13/15).

PR:             67768
Submitted by:   ade
Approved by:    4-exp bento runs (thanks, kris!)

Sync with new bsd.autotools.mk

- unbreak autoconf

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Replace all known incantations of WANT_{AUTOMAKE,AUTOCONF,LIBTOOL}* with
the USE_<x> equivalents.  In the current scheme of things, the WANT_
variables in this case are synonymous with the USE_ ones, and thus need
to be exterminated.

First in a series of major autotools cleanups.

- add SIZE

- Update to 0.93.94
- Fix MASTER_SITES

- update MASTER_SITES

- add CONFLICTS
Submitted by:   eikemeier@fillmore-labs.com

- change ECHO -> ECHO_CMD

- save lib/X11/config/host.def (which is created empty by imake)
Thanks to kris for notice.

- retire pkg-comment

- add COMMENT

- make portlint happier

- Add documentation
- install motif 2.1 libs
- remove lib*.la files

- Update to 0.93.36
supports Motif1.2 and Motif2.1

Take maintainership, Update pending:
http://people.freebsd.org/~dinoex/ports/lesstif/

new MASTER_SITES
PR:             41940
Submitted by:   shammer@satanii.enemy.org

Style police: WWW tags should either end in a file/script or TRAILING /; Fix the
later case    

Unbroke.    

Replace explicit build dependency on automake with USE_AUTOMAKE knob    

Batch of style fixes for x11-toolkits.    

Revert maintainer to ports@freebsd.org.    

Convert category x11-toolkits to new layout.  

Update to 0.91.8. Other improvements:    

Update to version 0.91.4    

Do not remove lib/X11/config/Imake.tmpl on deinstall. Additional work should  
be done to save/restore original lib/X11/config/Imake.tmpl.