security/libksba: Update to 1.6.7

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

security/libksba: Remove workaround after
d146ee382529d68faa184e4f218088114c4b0fc8

security/libksba: Update to 1.6.6

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

security/libksba: fix build with lld17

security/libksba: Update to 1.6.5

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

security/libksba: Update to 1.6.4

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

security/libksba: Update to 1.6.3

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

security/libksba: Update to 1.6.2

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

security/libksba: Update to 1.6.1

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD
		https://github.com/gpg/libksba/blob/master/NEWS
		https://github.com/gpg/libksba/commits/master

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

security: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Kapranoff <kappa@rambler-co.ru>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kriventsov <avk@vl.ru>
  *  Alexander Leidinger <netchild@FreeBSD.org>

security/libksba: Clean up MASTER_SITES

security/libksba: Cosmetic change

security/libksba: Add CPE information

Approved by:	portmgr (blanket)

security/libksba: Update to 1.6.0

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD
		https://github.com/gpg/libksba/blob/master/NEWS

security/libksba: Update to 1.5.1

Changes:	https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

Remove # $FreeBSD$ from Makefiles.

Update to 1.5.0

Changes:	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 4).

Update to 1.4.0

Changes:	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

Update WWW

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

update libksba to 1.3.5

PR:		212353
Approved by:	rene (mentor), sunpoet (maintainer-timeout)

- Update to 1.3.4
- Add LICENSE_FILE

Changes:	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 1.3.3

Changes:	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

- Update to 1.3.2

Changes:	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

- Update to 1.3.1
- Strip shared library
- Sort USES

Changes:	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libksba.git;a=blob;f=NEWS;hb=HEAD

- Drop .la files for security/libksba, no dependees require them
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

- Add missing USES=libtool

Approved by:	portmgr blanket

- Add LICENSE
- Convert to new LIB_DEPENDS format
- Use USES=tar:bzip2
- Cosmetic change
- Take maintainership
- Remove Author line
- Use single space after WWW:

- Stage support

[Errno 11] Resource Temporarily Unavailable

Reassigning my ports back to the pool with the hope of freeing up
to do more FreeBSD work in the future.

Submitted by:	glarkin

Add NO_STAGE all over the place in preparation for the staging support (cat:
security)

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Updated to 1.3.0
- Removed explicit library version number from gpg-error in LIB_DEPENDS

PR:		ports/172202
Submitted by:	Doug Barton <dougb@freebsd.org>

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build FreeBSD 10

Update libksba to 1.2.0, and update dependent ports.
The patch also adds a verify target for the PGP signature
of the distfile.

Noteworthy changes in version 1.2.0 (2011-03-01)
------------------------------------------------

* New functions to allow the creation of X.509 certificates.

This release adds features required by the GnuPG 2.1 development
version.

PR:             ports/155506
Submitted by:   me
Approved by:    maintainer timeout

- Updated to 1.1.0
- Bumped shlib version in pkg-plist to match upstream

Noteworthy changes in version 1.1.0 (2010-10-26)
------------------------------------------------

 * New functions to fix a leak in dirmngr.
 * Interface changes relative to the 1.0.0 release:
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 ksba_reader_set_release_notify   NEW
 ksba_writer_set_release_notify   NEW

Reported by:    portscout via miwi

- Added missing pkg-plist entry

Reported by:    QAT

- Updated to 1.0.8.
- Added explicit minimal version check for libgpg-error dependency.
- Explicitly build static library, since the default changed to "off" with
  this upstream version.

- Updated to 1.0.7

- Updated to 1.0.6

- Updated to 1.0.5

PR:             ports/130332
Submitted by:   Hirohisa Yamaguchi <umq at ueo dot co dot jp>

- Updated to 1.0.4
- Renamed a patch file with "make makepatch"

PR:             ports/127578
Submitted by:   Hirohisa Yamaguchi <umq at ueo dot co dot jp>
Approved by:    beech (mentor, implicit)

- Updated to 1.0.3

PR:             ports/120635
Submitted by:   Hirohisa Yamaguchi <umq at ueo dot co dot jp>
Approved by:    beech (mentor, implicit)

Reset lofi due to not commits in over 3 months, PR backlog, and no response
to email.

Hat:    portmgr

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Forced commit to note that the previous commit updated libksba to version
1.0.2, not 1.0.4.

- Clean up dependencies
- Update to 1.0.4

PR:             ports/118363, ports/118624
Submitted by:   Philip M. Gollucci, Hirohisa Yamaguchi

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Set infodir to the ports default.

Update to 1.0.1

Track libgpg-error shlib version change.

Fix build if dependencies are built WITHOUT_NLS.

Submitted by: dinoex

- Chase libgpg-error version bump [1]
- Add explicit version to libgpg-error dependency where missing [2]
- Bump PORTREVISION [1]

Approved by:    maintainers (arved, lofi, novel,
                ports at mcdermottroe dot com) [1]
Suggested by:   novel, lofi [2]

Update to 1.0.0

- Chase libgpg-error shlib version bump (.1 -> .2)
- Bump PORTREVISION

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Update libksba to 0.9.13
- Chase shared library bumps
- Update gnupg-devel to 1.9.20

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Update to 0.9.12

Update libksba to version 0.9.11.
Update gnupg-devel to 1.9.16.
Update dirmngr to 0.9.2.
Bump PORTREVISION for pinentry (for libksba shared library bump).

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update libgcrypt to 1.2.1. Changes:
        * made the code try to lock secure memory pool not only when running as
          root,
        * fixed type usage in Serpent,
        * made the code mix the PID into the entropy pool for better protection
          after a fork,
        * fixed memory leak in RSA.
        * fixed alignment problems in Rijndael,
        * fixed memory leak in gcry_pk_sign(),
        * fixed broken pointer access in gcry_ac_open(),
        * updated the documentation,
        * fixed several other bugs.
Chase Shared library version and bump PORTREVISION of affected ports.

Update to 0.9.10

Update to 0.9.9

PR: ports/72534
Submitted by: Jose M Rodriguez <josemi@freebsd.jazztel.es>

Update to 0.9.7

Remove pgp signature checking.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Don't try to extract a signature file.

Update WWW:

Add dependency on libgcrypt.

Reported by: bento via kris

Update the Aegypten ports to versions compatible with libgcrypt 1.2.0

Update libgcrypt to the new stable version 1.2.0
Retire libgcrypt-devel

Switch back to security/libgcrypt and bump PORTREVISION for
- gnutls
- gnutls-devel
- gsasl
- opencdk
- vpnc

libggz:
- Remove dependency on libgcrypt, because the port does not yet
work with the new libgcrypt

libksba:

Add SIZE

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Make fetchable

PR:             61453
Submitted by:   Jason Harris

Create the keyring in ${WRKDIR}

Use new INFO macros

Verify GnuPG signature if possible.

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Update to 0.4.7

Submitted by:   foxfair

de-pkg-comment

Use MASTER_SITE_GNUPG.

Add a missing file to pkg-plist

Submitted by:   bento

Add USE_AUTOCONF_VER instead of BUILD_DEPENDS
Add USE_PERL5_BUILD.
That hopefully fixes the problems with autom4te

Reported by:    bento (via kris)

Add libksba, an X.509 library

PR:     43895