mail/qmail: Sanitize MANPREFIX

Approved by:    portmgr (blanket)

mail/qmail: un-deprecate

Maintainer has contacted me off-list and intends to look into the open
PR, too.

mail/qmail: deprecate, and make my stuff fetchable

...officially.

qmail has not been maintained for years, and has been
unfetchable with default port options for long;
PR 254648 has been unanswered in a year -> Deprecate.

While this non-C99 conforming C89 software museum lasts,
make my own patch fetchable by placing the qmail/ dir
into our dist network.  bdrewery@ had cached a copy of it.

Fix WWW in parent/child ports

Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
 a) just using the pkg-descr from the parents
 b) or had their own separate pkg-descr with custom WWW

Use WWW?= in parents when the child's WWW is different.

Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.

Approved by:	portmgr (implicit)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

mail: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ashish@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam David <adam@FreeBSD.org>
  *  Adam McDougall <mcdouga9@egr.msu.edu>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Deiter <tiamat@komi.mts.ru>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alex Perel <veers@disturbed.net>

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

mail/qmail: Add CPE information

Approved by:    portmgr (blanket)

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Fix qmail's qmailsend wrapper script by using correct PATH and removing bad
quoting

PR:		252457, 252293
Submitted by:	erdgeist@erdgeist.org (maintainer)
Reported by:	callumgibson@optusnet.com.au
MFH:		2021Q1

mail/qmail: Fixes CVE-2005-1513 to CVE-2005-1513, update TLS patch
mail/qmail-tls: Update TLS patch

See
https://www.qualys.com/2020/05/19/cve-2005-1513/remote-code-execution-qmail.txt
for details about the CVEs

- now builds with openssl 1.1.1e from the ports

PR:		244969, 245010
Submitted by:	erdgeist@erdgeist.org (maintainer)
Reported by:	klokanek@eldar.cz
MFH:		2020Q2
Security:	CVE-2005-1513, CVE-2005-1514, CVE-2005-1515

qmail.org is gone, link to cr.yp.to/qmail.html instead

qmail.org has disappeared and there's no evidence it is coming back.

An unofficial cached copy can be found at
https://github.com/notqmail/qmail.org

Approved by:	swills, zeising
Differential Revision:	https://reviews.freebsd.org/D22129

onvert to UCL & cleanup pkg-message (categories l-m)

mail/qmail: fix include

PR:		235656
Submitted by:	erdgeist@erdgeist.org (maintainer)

mail/qmail-tls: patches to make it work with openssl 1.1.1 in base for 12+

PR:		235336
Submitted by:	erdgeist@erdgeist.org (maintainer)

mail/qmail: Remove support for expired SRS option.

The SRS option depended on a Google Code project which was abandonded in 2017.

Revert r446735 and unbreak, the patch fails to apply and is probably wrong

PR:		218590
Reported by:	pkg-fallout

mail/qmail-tls: Fix patch

 - Fix egregious accept=>connect mistake

PR:		218590
Reported by:	antoine

mail/qmail-tls: Fix build with LibreSSL

 - Replace direct struct access with get/setters

PR:		218590
Approved by:	erdgeist (maintainer)
MFH:		2017Q3

Begin deorbit burn of ia64.  We have not attempted to build packages for
it for many years.

While here, alphabetize ARCHs, pet portlint, and modernize usages.

Approved by:	portmgr (tier-2 blanket)

Gargabe collect install-mtree not used since pkg(8)

Approved by:	portmgr (mat)

Remove all _USE=openssl occurrences.

Sponsored by:	Absolight

Remove all USE_OPENSSL occurrences.

Sponsored by:	Absolight

Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.

In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed.  The remaining must not
be of use to anyone.

With hat:	portmgr
Sponsored by:	Absolight

mail/qmail{-tls}: update tls patch from 20110119 to 20160918

PR:		216365
Submitted by:	Dirk Engling <erdgeist@erdgeist.org> (maintainer)

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

mail/qmail-spamcontrol: document and support SSL requirement

My eyes are bleeding from looking at this qmail stuff.  The compiling
in the pre-patch target is an essentially nice touch.

Approved by:	SSL blanket

mail/qmail: Add rc.d script for qmails queue management daemons

PR:		210223
Submitted by:	Dirk Engling <erdgeist@erdgeist.org> (maintainer)

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Modernize pkg-plist, remove deprecated @dirrm

Approved by:	portmgr blanket

mail/qmail: Rename Make var from SELECTED_OPTIONS to SEL_OPTIONS

SELECTED_OPTIONS is now a framework informational variable, so there
is a name clash with qmail and its slave ports.  Just rename the
variable here to remove the conflict (No-op)

Approved by:	Just fix it

Dirk Engling <erdgeist@erdgeist.org> has volunteered to maintain the qmail
ports.

- Fix creation of rc symlink in package
- Fix procname in rc script so it can 'stop' correctly. [1]

Submitted by:	Dirk Engling <erdgeist@erdgeist.org> [1]

Drop 8 support.

With hat:	portmgr
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3694

Switch from NEED_ROOT to USES=fakeroot

Farewell qmail. You were good but the lack of an upstream maintainer or
ecosystem maintainers makes this not a viable mail system today. Personally
I am moving to postfix and have so far found it incredibly easy to setup and
already prefer it over qmail.

Remove $FreeBSD$ from patches files everywhere.

With hat:	portmgr
Sponsored by:	Absolight

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Fix /usr/local/etc/man.d appearing as a leftover since ~pkg 1.3.8.

Not bumping PORTREVISION as this is not worth shaking up qmail installations
over.

- Fix various distinfo errors
- Remove unused USE_* knobs
- Fix typos in USE_* knobs
- Remove empty lines after .include <bsd.port.mk>

Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D911

- Use my distcache for all files now. At least
  qmail-spf-rc5.patch-spamcontrol-27_2 was only in mine.

Reported by:	Eric Traphagan

Repair instances, almost all courtesy of bf ;-), of spaces
and/or tabs before the =. This made doing regular expressions
on the ports tree really difficult.

Approved by:	portmgr (not really, but touches unstaged ports)

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

Fix size for big-concurrency-spamcontrol-2731.patch from r360338

MFH:	2014Q3

Fix patch application in mail/qmail-spamcontrol:

The spamcontrol patch is applied through a script, install_spamcontrol.sh. This
script does not return a non-zero status when patch failures are encountered.
So I missed many failures when updating this port.

To fix this, move the spamcontrol patch application to pre-patch so that the
PATCHFILES->DISTFILES (and manual patch application with PATCH) is not needed
for most patches. This ensures that the spamcontrol patch is always applied
before PATCHFILES. Some PATCHFILES were applying before the spamcontrol patch
causing it to fail to patch properly.

Bump revision as the build had been fine but some files were not being
generated in the package.

Also add my mirror as distcache does not have the updated patches yet.

Reported by:	Oleg Strizhak
MFH:		2014Q3

Update mail/qmail-ldap to 20120221

- SMTPAUTHUSER option removed as it is now in upstream
- Apply upstream fixes from mailing lists

Changes:	http://www.nrg4u.com/qmail/QLDAPNEWS

mail/qmail-spamcontrol: Update to 2.7.31

TLSREMOTE, NEWLINE, and BIGTODO are now mandatory upstream and have been
removed as options.

MOREIPME was removed upstream.

Changes:
  http://www.fehcom.de/qmail/spamcontrol/RELEASE_27.spamcontrol

  CHANGES (2.6 -> 2.7)
  --------------------

  Userland:
  +) ucspi-ssl (> 0.8) mandatory.

Fix CONFLICTS with netqmail-tls after PKGNAME rename in r359176

mail/qmail-tls: Update to 20110119 and use netqmail base

Changes:
  2011-01-19
    * flush_io after starttls, bug described in
http://www.kb.cert.org/vuls/id/555316 (Wietse Venema)

  2007-04-08
    * type correction of time argument in ssl_timeoutio functions
    * bug in tlsserversciphers processing (Michael Hanselmann)
    * RFC1891 (James Couzens)

  2006-01-04
    * strerror declaration in tls.c compile problem (Renato Botelho, Bill Shupp)
    * chown uid.gid deprecated, should be uid:gid (Bill Shupp)

Fix CONFLICTS after qmail->netqmail rename

Fix nit, QMAIL_PORTNAME was not set after r358497

- Add DNS_CNAME option to switch from using ANY queries, which was a hack
  added many years ago for BIND 4. Using CNAME avoids excessive data in
  DNS query responses and temporary failures.

  This was already applied in spamcontrol.

  See also:
    http://homepage.ntlworld.com./jonathan.deboynepollard/Softwares/qmail/
    https://www.google.com/#q=CNAME_lookup_failed_temporarily

Submitted by:	Matt Simerson <matt@tnpi.net>

Switch mail/qmail and mail/qmail-mysql to using netqmail. Switch their
PKGNAMEs to reflect this as well and bump their version up to the last
netqmail release of 1.06.

qmail-ldap and qmail-spamcontrol explicitly want to be applied on stock
qmail, so leave those alone.

This does not bring much, but it allows easier updates to qmail-tls and
some of the other patches which depend on netqmail.

qmail-tls is left as qmail for now. It will be updated to the newer
revision soon which does require netqmail.

Changes include:
  * QMAILQUEUE by default
  * Fix for 0.0.0.0
  * qmail-smtpd is protected from exceedingly long (eg 2GB) headers

Other than those listed, there are no other significant changes beyond
documentation or patches that were already applied by default.

- Scale FD_SETSIZE with WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT

Submitted by:	Joe Schaefer <joe_schaefer@yahoo.com>

- Don't try removing /var/qmail/queue at all
- Remove /var/qmail/queue from STAGEDIR so it's not an orphan

mail/qmail, mail/qmail-tls, mail/qmail-mysql, mail/qmail-spamcontrol:

- Support stagedir
- Fix all leftovers
  Note that this depends on new Mk/Scripts/check_leftovers.sh added in r351446.
- Bump PORTREVISION in all ports due to plist being fixed.
- Support man.d on FreeBSD 9+
- Convert NOPORTDOCS
- Fix bad perl shebang for scripts/mkaliasdir
- Remove pkg-install and move all to pkg-plist
- Fix /var/qmail modified warning in poudriere by doing nothing in
  install-mtree
- Fix /var/qmail getting unpredictable/wrong permissions due to
  USERS/GROUPS changing for every user with HOME=/var/qmail
- Use more OPTIONS helpers
- Fix ccache support for spamcontrol patch building
- Fix build of SMTPEXTFORK in mail/qmail-spamcontrol with recent clang

Tested with:	pkg and pkg_install

Fix properties on pkg-plist

- Add NO_STAGE until validated to be safe for upcoming staging support

Fix qmail-spamcontrol build on head without gcc

Reported by:	bapt

Add file meant for r325421

- Fix build with clang and on head

Reported by:	bapt

- Convert to new perl5 framework

Approved by:	bdrewery@ (maintainer)

- Fix spamcontrol build after r324008 removed perl from PATCH_DEPENDS
  in bsd.perl.mk

- Fix options conversion for bmake

Submitted by:	Joseph Schaefer <joesuf4@gmail.com>

- Fix qmail-mysql build with clang and recent mysql-client

Reported by:	miwi via pointyhat

Add working mirror for tls patch

Fix typo on var name

Approved by:	maintainer

- Convert USE_QMAIL_RUN, USE_QMAIL_BUILD and WANT_QMAIL into USES feature
  bapt contributed to the qmail.mk as well
- Trim headers

USES= qmail:run will add qmail into RUN_DEPENDS
USES= qmail:build will add qmail into BUILD_DEPENDS
USES= qmail[:both] will add qmail into both RUN and BUILD DEPENDS
USES= qmail:vars will set QMAIL_PREFIX

With hat:	portmgr

- Fix error when QMAIL_PREFIX is not defined due to extra spaces
  "Makefile", line 653: Need an operator
  make: fatal errors encountered -- cannot continue

- Cleanup example rc file
 - Support SHUTDOWN
 - Check for needed files/dependencies in precmd
 - Respect LOCALBASE
 - Make rclint happy
- Rename symlink from qmail.sh to qmailsmtpd
- Rename installed example rc file from qmail-smtpd.rcNG to qmailsmtpd

- Fix runtime crash when using SMTPEXTFORK option due to
  calling strtok(3) without string.h included.
  Not reported "upstream" as the last update was 2009
  and the site is dead.

Reported by:	Christopher Weimann <christopher@weimann.us>

- Remove indefinite article from COMMENT
- Avoid directly including bsd.openssl.mk by including
  bsd.port.options.mk and using proper USE_OPENSSL

Pass maintainership of qmail ports and bsd.mail.mk to bdrewery@. It was funny,
but I'm not using qmail for a long time.

- Update TLS patch to v2, what address an issue that qmail-remote loops on
  malformed server response
- Bump PORTREVISION

Reported by:	Dirk Engling <erdgeist@erdgeist.org>
Feature safe:	yes

Fix OptionsNG commit, i committed the wrong version

Pointyhat to:	garga@
Feature safe:	yes

Convert mail/qmail to OptionsNG

Feature safe:	yes

Fix MAILDIRQUOTA patch that was calculating the wrong email size.

PR:		ports/168870
Submitted by:	Michael Gmelin <freebsd@grem.de>
Feature safe:	yes

Change headers of all ports maintained by me to new format

Fix various errors in ports distinfo
(yii-1.1.9.r3527.tar.gz verified against upstream sources)

Fix URL to download smtp-auth patch

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

Respect CC and STRIP

PR:             ports/162492
Submitted by:   Jan Beich <jbeich@tormail.net>
Feature safe:   yes

Typo fix in a printed string.

Approved by:    garga (maintainer)

- Add SMTPAUTHUSER and SRS support
- While here, use WANT_QMAIL rather than hideous relative include

PR:             ports/159964
Submitted by:   Nicolas de Bari Embriz <nbari@dalmp.com>
Approved by:    garga (carte blanche via email)

Fix qmail, qmail-tls, qmail-mysql and qmail-ldap build with clang

- Make qmail use USERS and GROUPS [1]
- Add my local_distfiles as a MASTER_SITES to ucspi-ssl

PR:             ports/157622 [1]
Submitted by:   crees [1]

Remove painful examples of foo="", with particular prejudice against
constructions that parse out to [ -z "$foo" ] && foo=""

These are bad examples that get copied and pasted into new code, so the
hope is that with less bad examples there will be less need for me to
bring this up in review.

In a few of these files all that were changed were comments so that next
time I search for these patterns I won't trip on the file for no reason.

In a few places, add $FreeBSD$

No functional changes, so no PORTREVISION bumps

- Update spamcontrol patch to 2.6.24
- Remove MD5

Feature safe:   yes

When server announce auth as "PLAIN LOGIN" instead of the common inverse order
"LOGIN PLAIN" make sure qmail-remote can authenticate.

Update spamcontrol patch to 2.6.23

- Really fix qmail-spamcontrol build now, i was building ucspi-ssl after
  install_spamcontrol.sh and it must run before since this script need to copy
  ssl.a to correct place
- Bump PORTREVISION

- Add perl build dependency, missed on last commit
- Bump PORTREVISION

Reported by:    QAT

Update spamcontrol to 2.6.22

Fix build with utmpx

Reported by:    pointyhat by erwin@

Remove references pointing to PORT_NOTE, a file that doesn't exist anymore

Reported by:    Elliot Denk <elliotdenk at googlemail.com>
Feature safe:   yes

Fix build on 9-CURRENT after utmp -> utmpx

Provided by:    ed@

Define rules for PORTSCOUT checking in some of my ports