*/*: Bump PORTREVISION for Ghostscript 10 change

Reported by:	sunpoet
Approved by:	jrm (mentor), sunpoet
Differential Revision:	https://reviews.freebsd.org/D42412

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

textproc/pdftohtml: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Update WWW: SF redirects to https://sourceforge.net/projects/<PROJECT_NAME>/

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Remove Author from pkg-descr and white space fixes

- Use SF macro in MASTER_SITES
- Remove redundant WRKSRC redefinition

Add a SourceForge mirror to MASTER_SITES.

PR:		191254
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com>

- Update to 0.40a.

PR:		190823
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com>

Support staging

textproc/pdftohtml: Resolve conflict with poppler-utils

The conflict between this unmaintained port and poppler-utils can be
problematic.  Ports should be using poppler-utils rather than this one
as a build dependency.  This port's package list is 1-line long, so
lets just rename the program so that it can coexist with the version
from poppler-utils.  The name changes from "pdftohtml" to "pdf-to-html"
along with a PORTREVISION bump.

Minor cleanup to pet portlint was alson done.

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

Drop maintainership.

- Fix all cases of 'No newline at end of file' in ports tree

Approved by: portmgr (bapt)

Register conflict with graphics/poppler-utils

Submitted by:   Sulev-Madis 'ketas' Silber <madis555@hot.ee>

- update png to 1.5.10

Fix mismerge

Submitted by:   Jan Beich <jbeich@tormail.net>

Respect CC

PR:             163171
Submitted by:   Jan Beich <jbeich@tormail.net>

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

-remove MD5

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V

- Fix CVE-2007-3387.
- Bump portrevision.

Submitted by:   Vladislav Sekulic Sys POC <pocsys@cs.toronto.edu> (based on)
Approved by:    secteam blanket
Security:      
http://www.FreeBSD.org/ports/portaudit/0e43a14d-3f3f-11dc-a79a-0016179b2dd5.html

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

This package doesn't really require X11 or Motif.

Make it respecting CFLAGS while I am here.

Fix build with gcc 4.x

Submitted by:   rafan

Use USE_GHOSTSCRIPT_RUN to simplify Makefile

PR:             110945
Submitted by:   rafan

Update to 0.39

Update to 0.38.
Now requires both gmake and motif.

- Add patches for security issues
- Bump PORTREVISION
- portlint(1)

Approved by:    maintainer timeout (2 days, security)
Obtained from:  gentoo
Security:       CVE-2005-3624, CVE-2005-3625, CVE-2005-3626, CVE-2005-3627,
                http://secunia.com/advisories/18303/

Backport xpdf vendor patch (affected part)
Bump PORTREVISION

PR:             90069
Approved by:    maintainer
Security:      
http://www.idefense.com/application/poi/display?id=342&type=vulnerabilities
               
http://www.idefense.com/application/poi/display?id=343&type=vulnerabilities
               
http://www.idefense.com/application/poi/display?id=344&type=vulnerabilities
                http://secunia.com/advisories/17897/
                CVE-2005-3191, CVE-2005-3192

- Add SHA256

Approved by:    maintainer

Fix latest and greatest xpdf vulnerability: makeFileKey2() buffer overflow

Patch recent xpdf vulnerability

Obtained from:  gentoo
Prodded by:     simon

Add size data, approved by maintainers.

Use PLIST_FILES.

Approved by:    erwin (maintainer)

This patch allows the admin of the machine to choose either
print/ghostscript-gnu or print/ghostscript-afp1

PR:             54952
Submitted by:   Jens Rehsack <rehsack@liwing.de>

Vendor update to 0.36

-added support for different Ghostscript output devices (-dev)
-updated Xpdf to 2.02 (security fix)
-a couple of fixes and tweaks for better output
-ported duplicate lines elimination from pdftotext (does not affect complex
mode)
-fixed bug which caused bold to spread from one sentence to the entire document
-support for document outlines (patch by Nicolas Pitre)

Change to my FreeBSD.org address

The default values of functions' arguments have to be specified at
declaration, not at definition. The new -current's compiler treats
this as an error.

PR:             ports/48716
Submitted by:   Erwin Lansing (the maintainer)
Approved by:    maintainer

De-pkg-comment.

Update to 0.35

PR:             47719
Submitted by:   Erwin Lansing <erwin@lansing.dk>, Udo Schweigert
<udo.schweigert@siemens.com>

add REINPLACE

PR:             40065
Submitted by:   Erwin Lansing <erwin@lansing.dk>

Keep checksum current: author rerolled distfile and the only change is to
not define HAVE_MKSTEMPS by default. Add a patch to define HAVE_MKSTEMPS
since we have it in our implementation.

PR:             ports/39582
Submitted by:   maintainer

- Fix typos in pkg-descr and dependencies
- bump PORTREVISION

PR:             39503
Submitted by:   maintainer

Update to 0.34

PR:             39456
Submitted by:   maintainer

Give maintainership to erwin@lansing.dk

PR:             37692
Submitted by:   Soeren Boll Overgaard <boll@fork.dk> (old maintainer)

Update to 0.33a

PR:             37403
Submitted by:   maintainer

Update to 0.32b

PR:             36590
Submitted by:   maintainer

add pdftohtml   A command-line tool for converting pdf-files into html