devel/py-Jinja2: Update to 3.1.4

- This is a security release, which fixes security issues and bugs but
  does not otherwise change behavior and should not result in breaking
  changes. [1]
- Convert from distutils to pep517
- Pet portclippy(1)

Reference:	https://github.com/advisories/GHSA-h75v-3vvj-5mfj [1]

Security:	CVE-2024-34064

devel/py-Jinja2: Update to 3.1.3

Release
changes:	https://jinja.palletsprojects.com/en/3.1.x/changes/#version-3-1-3
Reported by:	github-actions[bot] <notifications@github.com>

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

devel/py-Jinja2: Update WWW and USES=python

Approved by:	portmgr (blanket)
With hat:	python

devel/py-Jinja2: fix build of the slave port devel/py-Jinja2-doc

The slave port requires a version of the dependecy
textproc/py-pallets-sphinx-themes >= 2.0.2.

Poudriere log:	https://gist.github.com/nivit/01f2cb9a413b7c97c48435b9cf923df3
Reported by:	pkg-fallout

devel/py-Jinja2: Update 3.0.1 -> 3.1.2; Fix test target

PR:		260440 264990
Approved by:	nivit@ (maintainer's timoeut on 260440; 10.5 months)
Submitted by:	brd@, p5B2EA84B3@t-online.de

Fix WWW in parent/child ports

Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
 a) just using the pkg-descr from the parents
 b) or had their own separate pkg-descr with custom WWW

Use WWW?= in parents when the child's WWW is different.

Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.

Approved by:	portmgr (implicit)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-Jinja2: Add CPE information

Approved by:    portmgr (blanket)

devel/py-Jinja2: update to 3.0.1, clean up py27 leftovers

Changes: https://jinja.palletsprojects.com/en/3.0.x/changes/#version-3-0-1

PR:		258441
Reported by:	kbowling

devel/py-Jinja2: unbreak bulk -a

devel/py-Jinja2: update to 3.0.0

PR:	255923
Reported by:	vidwer+fbsdbugs@gmail.com

Mk: switch PYTHON_REL to 5 digits to support python 3.10.x

PR:		255013
Differential Revision:	https://reviews.freebsd.org/D29418
Exp-run by:	antoine
Approved by:	wen@, no objection from python@ or portmgr@

Remove # $FreeBSD$ from Makefiles.

Those ports are allowed to build a 2.7 flavor, for now.

Move textproc/py-MarkupSafe to textproc/py-markupsafe

- Bump PORTREVISION for dependency change

Unbreak bulk -a

- Fix build of slave port devel/py-Jinja2-doc by adding missing dependencies:
  devel/gmake, textproc/py-pallets-sphinx-themes, textproc/py-sphinx-issues,
  textproc/py-sphinxcontrib-log-cabinet

- Update to 2.11.2

PR:	248523
Submitted by:	dvl

Update Sphinx

- Repocopy textproc/py-sphinx to textproc/py-sphinx18

  Update it to 1.8.5 (latest version from 1.8.X).
  This version supports Python 2 and 3.
  Add test target.

- textproc/py-sphinx: Update to 3.0.2

  Python 3 only (3.5+).
  Add test target.

- Mk/Uses/python.mk: Add PY_SPHINX

devel/py-Jinja2: Update to 2.10.1

Changelog:

https://github.com/pallets/jinja/blob/2.10.1/CHANGES.rst

PR:		237424
Approved by:	nivit (maintainer timeout)

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Use the correct variable for dependency lines.

PKGNAMEPREFIX the name of the current package prefix, it is not correct
to use it for other package names.

Sponsored by:	Absolight

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

devel/py-Jinja2: Update to 2.10

PR:		223863
Submitted by:	yuri
Approved by:	nivit (maintainer), tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D13281

Revert the removal of 2to3 stuff in r437424

Reported by:	Vladimir Krstulja <vlad-fbsd@acheronmedia.com>

Update to 2.9.5

- While I'm here:
  - Remove 2to3 stuff
  - Simplify PKGNAMESUFFIX check

Changes:	https://github.com/pallets/jinja/blob/master/CHANGES
PR:		215651 (based on)
Submitted by:	olivierd
Approved by:	maintainer (timeout, 3 months)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

devel/py-Jinja2: update to 2.8

- update to 2.8
- add LICENSE_FILE, add NO_ARCH
- running 2to3 tool is not needed anymore, except the examples
- remove patch that's not applicable anymore

Changelog:
http://jinja.pocoo.org/docs/dev/changelog/#version-2-8

Approved by:	nivit (maintainer, by email)

Switch PYTHON_REL from a 3 digits number to a 4 digits number to handle
python 2.7.10

Differential Revision:	https://reviews.freebsd.org/D2639
Reviewed by:	sunpoet, mva

- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)

- Update to 2.7.3  [1]
- Don't install .buildinfo file because it's not part of docs.

PR:	190728  [1]
Submitted by:	olivierd

devel/py-Jinja2: Make MarkupSafe an unconditional requirement

MarkupSafe use to be an optional requirement to enable "speedups"
(performance optimizations). It is now referenced in setup.py
install_requires [1] and imported in util.py [2] making it effectively
compulsory, which the author also confirms. [3]

- Add MarkupSafe to RUN_DEPENDS
- Deprecate SPEEDUPS option accordingly

[1] https://github.com/mitsuhiko/jinja2/blob/2.7.2/setup.py#L83
[2] https://github.com/mitsuhiko/jinja2/blob/2.7.2/jinja2/utils.py#L520
[3] https://twitter.com/mitsuhiko/status/450562002977824769

Reported by:	olivierd
Approved by:	maintainer (via email)

devel/py-Jinja2: Update to 2.7.2

- Update to 2.7.2
- Remove deprecated OPTIONSFILE variable.

Changes:

    http://github.com/mitsuhiko/jinja2/blob/2.7.2/CHANGES

PR:		ports/187272
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>
Approved by:	maintainer timeout (>2 weeks)

devel/py-Jinja2: support staging and do general clean-up

- clarify license (BSD3C)
- do not use easy_install for installation and convert to auto-generated packing
list
- add staging support
- utilize options helpers
- use PYTHON_REL instead of PYTHON_VERSION to build docs for python >= 3.2, not
only for 3.2
- unmute installation commands
- remove inclusion of devel/py-virtualenv/files/py3k-fix-pkg-plist.inc - it's
implemented in bsd.python.mk
- bump PORTREVISION because of package change

Approved by:	nivit (maintainer, explicitly for such changes in his ports)

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- Update to 2.7.1
- Adjust minimal versions of dependencies
- Enable Babel support also for Python 3

Build logs:	https://redports.org/buildarchive/20130828163200-64794/
PR:	ports/181219
Submitted by:	olivierd

- Fix build with Python 3.2  [1]
- Put all options for the command 2to3 in PY2TO3_ARGS

Build log:	http://goo.gl/AxzsT
Reported by:	eadler (via private email)  [1]

- Fix build error (see http://goo.gl/3D1EH ) of devel/py-Jinja2-doc,
  by adding files/patch-docs__jinjaext.py

Pointed out by:	portbuild (via miwi)

- Portlint

- Update to 2.7  [1]
- Trim Makefile header  [1]
- Set USE_PYTHON to yes  [1]
- Add TEST_DEPENDS

Build log:	http://goo.gl/5JD9Z
Release notes:	http://goo.gl/Oyve4

PR:	ports/179618  [1]
Submitted by:	olivierd

- Update WWW, and remove Author field (pkg-descr)
- Bump PORTREVISION (change pkg-plist)
- Convert to the new options framework
- Remove LICENSE_FILE variable
- Remove address no longer available from MASTER_SITES
- Run 2to3 script on examples/docs dir, and include
  devel/py-virtualenv/files/py3-fix-pkg-plist.inc when
  Python version >= 3.0
- Rearrange Makefile to support a slave port (Jinja2-doc),
  that only installs documentation. That is to avoid a
  circular dependency between this port and textproc/py-sphinx,
  which is necessary to build docs
- Add a test target to Makefile

BuildLog:	http://goo.gl/yfMhR

Fix typos in COMMENT

- Update to 2.6
- Add LICENSE stuff to Makefile
- Add post-build target to install the bytecode of the examples files

PR:             ports/159186
Submitted by:   Olivier Duchateau <duchateau.olivier at gmail.com>

- Move from py24 over to py25 or above
- Drop md5 support

- Update to 2.5.5
- Install only the reStructured files as documentation, because we should
install textproc/py-sphinx to create other formats, but py-sphinx requires
Jinja2 as dependency.

PR:             ports/151575
Submitted by:   Olivier Duchateau <duchateau.olivier at gmail.com>

- Update to 2.5.2
- Add options WITH_SPEEDUPS (on) and WITH_BABEL (off)
- Remove files/patch-*

- Enable speedups

PR:             ports/146507
Submitted by:   Oleg Pudeyev <oleg@bsdpower.com>
Approved by:    maintainer timeout (nivit ; 120 days)

- Update to 2.4.1
- Remove PYEASYINSTALL_ARCHDEP stuff from  Makefile

- Initial version (2.1.1) of Jinja2 after repocopy from devel/Jinja

- Force commit after repocopy from devel/py-Jinja