| Port details |
- pyrad Python implementation of RADIUS client
- 2.4 net
 =2       2.4Version of this port present on the latest quarterly branch. - Maintainer: steve@energistic.com
- Port Added: 2007-08-23 12:18:40
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- https://pypi.org/project/pyrad/
- Description:
- pyrad is a Python implementation of a RADIUS client as described in RFC2865.
It takes care of all the details like building RADIUS packets, sending them
and decoding responses.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}pyrad>0:net/pyrad@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/net/pyrad/ && make install clean
- To add the package, run one of these commands:
- pkg install net/pyrad
- pkg install py39-pyrad
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-pyrad listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-pyrad
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1635956882
SHA256 (pyradius-pyrad-2.4_GH0.tar.gz) = aa3312a68c0a0d60fd2222df7ad0d22089c269bc8430dd840f4648431fa02c59
SIZE (pyradius-pyrad-2.4_GH0.tar.gz) = 54431
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- py39-nose>=0.10.0b1 : devel/py-nose@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-netaddr>0 : net/py-netaddr@py39
- py39-six>0 : devel/py-six@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- www/py-django-radius
Configuration Options:- ===> The following configuration options are available for py39-pyrad-2.4:
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
- Options name:
- net_pyrad
- USES:
- cpe python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.4
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.4
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2.4
20 Jul 2022 14:22:37
|
Tobias C. Berner (tcberner) |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
2.4
05 Nov 2021 08:35:57
|
Kai Knoblich (kai) |
net/pyrad: Update to 2.4 [1]
While I'm here:
* Switch to GitHub for a while to keep the EXAMPLES option as the
useful examples aren't included with the sdist at the moment.
* Make package concurrent safe due to the example files that are
installed outside of Python's site-lib directory.
* Convert to option helpers.
* Add "do-test" target to make future QA easier.
PR: 259332
Reported by: Gian-Simon Purkert [1]
Approved by: maintainer timeout (14+ days)
MFH: 2021Q4
Security: 17702e54-3da0-11ec-b7e0-3085a9a95629 |
2.0_1
30 Sep 2021 09:42:23
 |
Bernhard Froehlich (decke) |
net/pyrad: Add CPE information
Approved by: portmgr (blanket) |
2.0_1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.0_1
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.0_1
25 Apr 2018 16:42:38
|
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
2.0_1
24 Oct 2014 16:21:26
|
mva |
- Convert ports of net/ to new USES=python
Approved by: portmgr (implicit) |
2.0_1
14 Jun 2014 11:18:25
|
mva |
- Enable stagedir support
- Remove easy_install dependency
- Convert to PYDISTUTILS_AUTOPLIST
- Bump PORTREVISION to enforce a cleanup for the easy_install references
With hat: python@
Approved by: portmgr (implicit) |
2.0
20 Sep 2013 22:10:25
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
net) |
2.0
08 Jul 2013 12:42:01
|
wg |
net/pyrad: update to 2.0
- Update to 2.0 [1]
- NOPORTEXAMPLES -> PORT_OPTIONS:MEXAMPLES
- Proper install examples and add to options
- Trim Makefile header
PR: ports/180213 [1]
Submitted by: Chris Mikkelson <cmikk uerige.oss.uswest.net> [1]
Approved by: maintainer |
0.9
20 Mar 2011 12:54:45
|
miwi |
- Get Rid MD5 support |
0.9
25 Aug 2007 01:14:47
|
miwi |
- Set correct maintainer
Reported by: sat |
0.9
23 Aug 2007 12:18:20
|
miwi |
pyrad is a Python implementation of a RADIUS client as described in RFC2865.
It takes care of all the details like building RADIUS packets, sending them
and decoding responses.
WWW: http://www.wiggy.net/code/pyrad/
PR: ports/115458
Submitted by: Blaz Zupan <blaz at si.FreeBSD.org> |
As an Amazon Associate I earn from qualifying purchases.