cad/openscad-devel: Update to current as of 2025.01.10

devel/boost: bump consu,ers after update Boost to 1.86 release

Sponsored by:	Future Crew, LLC

cad/openscad*: Remove dependency

Now since qt5-multimedia depends on alsa plugin openscad* doesnt need to

PR:		276276

*/*: Chase devel/qscintilla2 flavorization

devel/qscintilla2*: Flavorize ports

cad/openscad*: Clean up

Remove redundant audio/alsa-plugins dependency
pet portlint

Reported by:	makc@

cad/openscad*: Add dependency

Add audio/alsa-plugins as a dependency

PR:		276276
Reported by:	Greg Balfour

cad/Clipper2: Build shared lib

Switch to shared library and improve port
Bump PORTREVISION

PR:		282056
Reported by:	Daniel Engberg zzy@

cad/openscad-devel: Update

Unbreak and update to a more recent snapshot 2024.10.11

*/*: bump consumers after devel/boost* update

With hat:	office
Sponsored by:	Future Crew, LLC

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

cad/openscad-devel: Update to current 2022.12.20

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

cad/openscad-devel: Fix build

Remove qmake from USES.
Remove buildtools, add qmake_build to USE_QT.
Add two patches which got missed previously.
This should satisfy the build.

cad/openscad-devel: Update and unbreak

Update to the current state as of 2022.09.03 and try to unbreak.

*/*: bump all consumers after recent boost upgrade

archivers/libzip: Bump PORTREVISION on dependent ports

cad: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Andersson <anders@hack.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Christoph Moench-Tegeder <cmt@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Diane Bruce <db@db.net>
  *  Joachim Strombergson <watchman@ludd.ltu.se>
  *  Johnny Sorocil <jsorocil@gmail.com>
  *  Julian Jenkins <kaveman@magna.com.au>
  *  Marc Fonvieille <blackend@FreeBSD.org>

cad/openscad-devel: mark BROKEN

Approved by:	portmgr blanket

cad/openscad-devel: Update to 2022.05.20

Use the version as of 2022.05.20

devel/boost-all: bump all library consumers after boost upgrade

PR:	246106

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

devel/qscintilla-qt5: Update to 2.13.2

Change:
  - https://riverbankcomputing.com/news/QScintilla_2.13.2_Released

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

*/*: Update qscintilla2 to 2.13.1

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.1_Released

*: fix tab vs. space issues, and comments according to the guide.

cad/openscad*: Fix build against CGAL 5.3

PR:		258085
Approved by:	wen
Obtained from:	https://github.com/openscad/openscad/pull/3844

cad/openscad-devel: Add CPE information

Approved by:	portmgr (blanket)

*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
  - https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR:	257308
Exp-run by:	antoine

devel/qscintilla2: Update to 2.12.1

Changelog:
	https://riverbankcomputing.com/news/QScintilla_2.12.1_Released

PR:		257002
Exp-run by:	antoine

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

math/cgal: Update to 5.2.1

 - Remove files/patch-CMakeLists.txt
 - Remove LD_CONFIG and move USES (pet porlint)
 - Bump ports

Changes:
   - https://www.cgal.org/2021/03/17/cgal521/
   - https://www.cgal.org/2020/12/22/cgal52/

PR:		255171
Approved by:	wen

Clean up all commented PORTREVISION and PORTEPOCH lines

No revision bump tool that we have cleans them up or deals with
them, so we end up with duplicated lines.  Instead of implementing
that just clean up the 51 ports that do this.

PORTREVISION and PORTEPOCH can be set to 0 explicitly instead if
you need a reminder or placeholder.

Remove # $FreeBSD$ from Makefiles.

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

Update openscad to 2021.01 and openscad-devel to the latest commit

Update qscintilla2 to 2.11.6

- Upgrade math/eigen3 to 3.3.8;

- Add some dependencies which might be detected by Find_Package but not
registered;

- Bump PORTREVISION of consumers.

PR:		250833
Submitted by:	/me
Approved by:	tcberner@ (KDE / maintainer) + exp-run

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

smath/cgal: Update to 5.0.2

The new version of CGAL brings improvements and a lot of changes, including 2
major ones [1](header only[2] and require c++14) requiring to patch all software
depending on it.

[1] https://www.cgal.org/2019/11/08/cgal50/
[2] https://doc.cgal.org/latest/Manual/installation.html

math/cgal:

   - Update to 5.0.2

databases/sfcgal:

   - Fix with cgal5 : use c++14 and add gmpxx link

Update py-sip to 4.19.21 and qscintilla2 to 2.11.4

  - Update py-sip to 4.19.21
  - Update qscintilla2 to 2.11.4
  - Replace MASTER_SITE_RIVERBANK with https versions
  - Replace QSCI2_DISTNAME to match with the new one

PR:		245308
Approved by:	tcberner (mentor)
Exp-run by:	antoine

Update to latest commit from 2020.01.04

devel/boost-*: update to 1.72.0

Changes:	http://www.boost.org/users/history/version_1_72_0.html
PR:		241449
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D22136

Add USES=xorg USES=gl, ports categories c

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'c'.

cad/openscad: unbreak with boost 1.72

src/parser.y:68:6: error: no template named 'stack' in namespace 'std'
std::stack<LocalScope *> scope_stack;
~~~~~^

Update to 2019.09.05

devel/boost-*: update to 1.71.0

Changes:	http://www.boost.org/users/history/version_1_71_0.html
PR:		238827
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D20774

devel/double-conversion: Update 3.0.0 -> 3.1.5-11

Maintainer reset due to the extended timeout, as per policy.
Take maintainership.

7 ports are bumped.

PR:		239367
Approved by:	waitman@waitman.net (maintainer's timeout; ~6months on a PR#235789
for the same port)

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

devel/boost-*: update to 1.70.0

Changes:	http://www.boost.org/users/history/version_1_70_0.html
PR:		235956
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D19303

Update to latest version from 2019.04.04 and fix pkg-plist to fix build errors.

PR:	237015

Update to 2019.02.05

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

Update math/eigen3 to 3.3.7

- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.6
- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.7

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

devel/boost-*: update to 1.69.0

Changes:	http://www.boost.org/users/history/version_1_69_0.html
PR:		232525
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17645

Update 2018.10.22:
	Unbreak with Boost 1.69
	Drop dependency on -lcompat
	Replace time.h with ctime

PR:	232516
Submitted by:	Jan Beich jbeich@

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

devel/boost-*: update to 1.68.0

- Switch to C++14 for libboost_system to support C++14 consumers

Changes:	http://www.boost.org/users/history/version_1_68_0.html
PR:		229569
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D16165

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

- Whitespace fix

Approved by:	portmgr blanket

Drop FreeBSD 10.3 support

Reviewed by:	yuri (SoPlex), sunpoet (nghttp2), cpm (chromium), brooks (llvm*)
Approved by:	portmgr (rene)
Differential Revision:	https://reviews.freebsd.org/D15238

Update the QScintilla2 ports to 2.10.4

Reenable for FreeBSD >= 10.4
Use the CONFIG argument to enable experimental features

Submitted by:	jbeich@

Enable experimental features.
Make portlint happy.
Mark Broken for FreeBSD 10 due to compile/link error.

Add openscad-devel as of 2018.04.19

PR:		227581