- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

- Add a patch to fix endianess detection

PR:             ports/133487
Submitted by:   Oliver Lehmann <lehmann AT ans-netz.de>
Approved by:    Alexander Churanov <alexanderchuranov AT gmail.com> (maintainer)

- mark as MAKE_JOBS_SAFE, also apply ${_MAKE_JOBS} to BJAM_OPTIONS

PR:             ports/133054
Submitted by:   Anonymous <swell.k AT gmail.com>
Approved by:    Alexander Churanov <alexanderchuranov AT gmail.com> (maintainer)

- Update to 1.37

PR:             ports/129226
Submitted by:   Alexander Churanov <alexanderchuranov AT gmail.com> (maintainer)
Helped by:      amdmi3
Exp-run by:     pav

With portmgr hat, assign maintainership to new volunteer.  (Previous
maintainer has been inactive for > 3 months).

- Remove duplicates from MAKE_ENV after inclusion of CC and CXX in default
MAKE_ENV

- Enable build on powerpc by correctly setting up bjam path

PR:             ports/12287
Submitted by:   Peter Grehan

- Update to Boost 1.34.1. Bug fix release, see [1] for the complete list
  of changes.
- Mark boost-1* and boost-python-1* mutually conflicting [2]

Submitted by:   thierry [2]

[1] http://svn.boost.org/trac/boost/query?status=closed&milestone=Boost+1.34.1

Build bjam tool with -fno-strict-aliasing:
- Fixes build on 7/amd64 (gcc 4.2.0)
- Note: this only affects the build of the bjam tool,
  the libraries are build with the user's CXXFLAGS settings

Reported by:    trasz@
                "Matthew D. Fuller" <fullermd@over-yonder.net>
                Pascal Hofstee <caelian@gmail.com>

Obtained from: 
http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=22;filename=boost.diff;att=1;bug=367825
                (only the -fno-strict-aliasing part) via
                http://svn.boost.org/trac/boost/ticket/977

Update to boost 1.34.0:

 - ChangeLog: http://lists.boost.org/boost-announce/2007/05/0131.php
 - Uses Boost.Build v2
 - Fixes build g++ 4.2 (and there for on 7-CURRENT)
 - Port respects CXXFLAGS unless the WITH_OPTIMIZED_CFLAGS option is set
   that enables -O3 optimization and full inlining

Requested by:   many
PR:             ports/113474 (resolved)
Obtained from: 
http://boost.cvs.sourceforge.net/boost/boost/boost/detail/atomic_count_gcc.hpp?r1=1.5&r2=1.5.8.1
                via pav

Make fetchable again (MASTER_SITE_SUBDIR was accidentally deleted in last
commit).

Reported by:    Bill Fenner's distfile script

- Remove support for FreeBSD 4.
- Remove devel/boost-gcc3, since it's only usefull on 4.x
- Minor portlint tweaks.

- Fix build with g++41 by restricting the offsetof workaround for use
  with g++3.x and below

Requested by:   kris

Upgrade ICU from 3.4.1 to 3.6. Build WITHOUT_THREADS by default -- using
threads is broken on ia64 (marcel is investigating) and seems useless
elsewhere.

Filter `-funroll-loops' out of CFLAGS for now -- it seems to cause
miscompilation occasionally.

Correct the dependencies to stop requiring a particular version number
of the ICU's libraries to ease future upgrades.

- libbgl-wiz requires spirit-1.8, so don't build it on FreeBSD 4 unless
  gcc-3.4 is used [1]. This fixes the build on FreeBSD 4.x.
- Install libboost_serialization.so as libboost_serialization.so.3 and
  create a symlink. [2]

Reported by:    many [1], bmah [2]
PR:             ports/102524

- Fix const-correctness bug in Boost.Regex-1.33.x
  that strikes only in multithreaded programs on Unix platforms, if:
   * Multiple threads construct regexes concurrently, or
   * Multiple threads perform search and replace operations concurrently.
- Bump PORTREVISION (threads are enabled in the port's default configuration)

Submitted by:   John Maddock <john@johnmaddock.co.uk> via boost-announce
Found by:       Aleksey Sanin
See also:       http://lists.boost.org/boost-announce/2006/08/0097.php

- Build libbgl-viz.a (needed to use the GraphViz reader)
- Build librandom_device.a (needed to use certain PRG algorithms that
  rely on /dev/urandom)
- Remove former maintainer from pkg-descr
- Bump PORTREVISION

Requested by:   Fernando Herrero Carrón <fernando.herrero@uam.es>

Remove USE_REINPLACE from all categories starting with D

Update to Boost 1.33.1:
  * Bugfix release
  * ChangeLog at https://sourceforge.net/forum/forum.php?forum_id=517679

Avoid duplicate LASTEST_LINKs by conditionally modifing PKGNAMESUFFIX,
resulting in boost-python-gcc3 (if the boost port is built on 4.x from
devel/boost-gcc3 (which implies WITH_PYTHON)).

Mark the devel/boost-gcc3 slave port IGNORE on FreeBSD >= 5.

Keep up with devel/icu shared lib version bump.

Submitted by:   Vladimir Guzma <vladimir.guzma@tut.fi>
PR:             ports/89009

- Add distfile for spirit 1.6 (for FreeBSD 4) to distinfo. This was lost
  during the SHA256-ification

Reported by:    pointyhat via kris
Pointyhats{'barner'}++;

- Update to Boost 1.33.0
  * Boost.Regex now supports the ICU unicode library
  * Optionally build Boost with GCC 3.4 on FreeBSD 4.x [1]
  * For changes to the Boost libraries see their specific ChangeLogs
    in ${LOCALBASE}/share/doc/boost or at http://www.boost.org/
  * Bump shared library version to 3

PR:             ports/88014 [1]
Submitted by:   Václav Haisman [1]

- Don't install symlinks to shared libraries that are not installed.
  Specifically, this is about the !WITH_PYTHON and !WITH_THREADS cases.

- This fixes the plist again.

Reported by:    kris via pointyhat
Approved by:    arved (mentor)

- no python implies no pyste (fix conditionally created plist) [1]
- document WITH_PYSTE knob

Pointed out by: lofi [1]
Approved by:    arved (mentor)

- Add WITH_PYSTE knob in oder to keep the list of dependencies smaller for the
  WITH_PYTHON case. WITH_PYSTE implies WITH_PYTHON. [1]

- Print frame around pkg-message in order to attract the user's attention.

Requested by:   nectar [1]
Approved by:    arved (mentor)

- Install pyste, a interface generator for Boost.Python
  This adds two run time dependecies in the WITH_PYTHON case:

    * devel/gccxml
    * devel/py-elementtree

  This was requested in [1].

- Add pkg-message to help developers getting started with boost:
  Give suggestions for CFLAGS and LDFLAGS for the following build
  options:

    * BOOST_THREADS: pkg-message.threads
    * WITH_PYTHON:   pkg-message.python
    * stlport (4.x): pkg-message.stlport

- remove pkg-install script and perform installation in Makefile

PR:             ports/77640 [1]
Approved by:    arved (mentor)

Change email address in ports maintained by me to barner@FreeBSD.org

Approved by:    arved (mentor)

Unbreak devel/monotone on FreeBSD-5.3.

Bump PORTREVISION.

PR:             ports/76730
Submitted by:   Mark A. Wicks and maintainer
Obtained from:  Boost CVS repository.

- Update devel/boost to 1.32.0
- Add slave devel/boost-python port
- Remove devel/spirit because of it's a part boost now

PR:             ports/75377
Submitted by:   Simon Barner <barner(at)gmx.de> (maintainer)

Move to OPTIONS.

PR:             ports/70898
Submitted by:   maintainer

- Fix build on alpha

PR:             ports/67338
Submitted by:   Simon Barner <barner@in.tum.de> (maintainer)

Fix build on IA64

PR:             63903
Submitted by:   Simon Barner <barner@in.tum.de>

remove obsolete extra-patch file
patch html files only if NOPORTDOCS not defined

Submitted by:   maintainer

upgrade to 1.31.0

 - builds the most recent boost version (1.31.0)
 - respects PTHREAD_{CFLAGS, LIBS} (credits for the PTHREAD_LIBS part
   go to Craig Rodrigues <rodrigc@crodrigues.org>)
 - builds all boost libraries
 - installs docs into DOCSDIR, and examples into EXAMPLESDIR (as
   before), but the hyperlinks to the example files are corrected (pls.
   report if you find some broken links)
 - has new various tunable options, such as
    o WITH_DEBUG
    o WITHOUT_THREAD
    o WITH_OPTIMIZED_CFLAGS
    o VERBOSE_BUILD
 - forced major numbers for shared libraries (everything defaults to
   .so.1, and is symlinked to .so)
 - installs the possible versions of the libraries (w/ or w/o
   debugging or threading support) with the same suffix- and prefix-less
   name, e.g. instead of libboost_filesystem-gcc-debug-s.so.1 (the gcc toolset,
   debugging info and single threaded) and
   libboost_filesystem-gcc-m.so.1 (gcc toolset, release version, multi
   threaded), there now is only libboost_filesystem.so.1.

PR:             63100
Submitted by:   maintainer

FORBIDDEN on 5.x: Does not respect PTHREAD_{CFLAGS,LIBS}

Simon Barner has agreed to maintain this port.

Approved by:    maintainer timeout
                (I've used a ~2 week timeout without an email
                contact; as can be seen and I've already noticed
                for another port, the maintainer is not responsive
                for a much longer time)

Fix build on Alpha and Sparc arch

Approved By:    maintainer timeout (2 weeks)

- Fix build (previous update was incomplete):
  Do not add PYTHON_* variables to MAKE_ENV unless
  WITH_PYTHON knob is enabled
- Remove spaces on empty line to please portlint

While I'm here:
- s/+=/=/ where appropriate

PR:             59255
Submitted by:   Sergey Matveychuk <sem@ciam.ru>
Approved by:    maintainer's silence

utilize DOCSDIR & EXAMPLESDIR, and sort it

unbreak
upgrade to 1.30.2

PR:             58168
Submitted by:   Keishi Katoux <k-shi_freebsd@k2factory.org>
Approved by:    maintainer timeout

Mark BROKEN (see bento logs).  These ports are scheduled for removal
after Feb 2 2004 if they are still broken at that time and no fixes
have been submitted by PR.

BROKEN: Errors during build

Bump PORTREVISION after lang/python's changing default to
BUILD_STATIC. This affects to python embedding programs only.

Submitted by:   olgeni

- Update to Boost 1.30.0.
- Honor CC/CXX as best we can (bjam build system is buggy in this area)
- Pull down GCC 3.3 `support' from Boost CVS

Approved by:    Paul Marquis <pmarquis@pobox.com> (maintainer)

De-pkg-comment.

- Update to version 1.29.0
- Attempt to install full documentation (which is difficult to separate from
  the rest of the source)

Approved by:    Paul Marquis <pmarquis@pobox.com> (MAINTAINER)

If port is built with WITHOUT_PYTHON set, don't include Python libraries in
package list

PR:             38580
Submitted by:   maintainer

Update to latest(1.28.0)

PR:             38455
Submitted by:   maintainer

Add boost, free peer-reviewed portable C++ source libraries.