| Port details |
- py-args Command arguments for humans
- 0.1.0 devel
 =2      0.1.0Version of this port present on the latest quarterly branch. - Maintainer: nivit@FreeBSD.org
- Port Added: 2014-07-18 01:53:50
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- License: BSD2CLAUSE
- WWW:
- https://github.com/kennethreitz/args
- Description:
- This simple Python module gives you an elegant interface for your command line
arguments.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}args>0:devel/py-args@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-args/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-args
- pkg install py39-args
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-args listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-args
- Package flavors (<flavor>: <package>)
- distinfo:
- SHA256 (args-0.1.0.tar.gz) = a785b8d837625e9b61c39108532d95b85274acd679693b71ebb5156848fcf814
SIZE (args-0.1.0.tar.gz) = 3048
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- audio/py-soundscrape
- deskutils/py-pystash
- devel/py-clint
Configuration Options:- No options to configure
- Options name:
- devel_py-args
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.1.0
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.1.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.1.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.1.0
20 Jul 2022 14:21:35
|
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
0.1.0
22 May 2022 05:11:37
|
Po-Chuan Hsieh (sunpoet) |
devel/py-args: Add NO_ARCH
Approved by: portmgr (blanket) |
0.1.0
19 Apr 2021 08:00:13
|
Tobias Kortkamp (tobik) |
Clean up all commented PORTREVISION and PORTEPOCH lines
No revision bump tool that we have cleans them up or deals with
them, so we end up with duplicated lines. Instead of implementing
that just clean up the 51 ports that do this.
PORTREVISION and PORTEPOCH can be set to 0 explicitly instead if
you need a reminder or placeholder. |
0.1.0
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.1.0
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
0.1.0
20 Oct 2014 16:04:14
|
mva |
- Convert ports of devel/ to USES=python
Approved by: portmgr (implicit) |
0.1.0
18 Jul 2014 01:53:41
|
nivit |
This simple Python module gives you an elegant interface for your command line
arguments.
WWW: https://github.com/kennethreitz/args |
As an Amazon Associate I earn from qualifying purchases.