editors/nano: Update to 8.3

Changelog: https://www.nano-editor.org/news.php

editors/nano: Update to 8.2

editors/nano: Update to 8.1

editors/nano: Update to 8.0

editors/nano: Move man pages to share/man

Approved by:	portmgr (blanket)

editors/nano: Update to 7.2

editors/nano: Update to 7.1

editors/nano: Update to 7.0

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

editors/nano: Update to 6.4

PR:		265634
Reported by:	wen@
Approved by:	maintainer(timeout, > 14 days)

editors: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohout <shanee@augusta.de>
  *  Andrej Zverev <az@inec.ru>
  *  Andrey Zakhvatov
  *  Anton Tornqvist <antont@inbox.lv>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Bob Eager <bob@eager.cx>
  *  Chris D. Faulhaber <jedgar@fxp.org>

editors/nano: Update to 6.2

Changelog: https://www.nano-editor.org/news.php

PR:		262087
Approved by:	danilo (maintainer timeout, 2+ months)

editors/nano: Update to 6.0

PR:		260588

editors/nano: Update to 5.9

PR:		259124

editors/nano: Update to 5.8

editors/nano: Update to 5.7

editors/nano: Update to 5.6.1

While here, drop obsolete nano-devel* CONFLICTS.

PR:		254127
Approved by:	danilo@ (maintainer timeout, 31 days)

Remove # $FreeBSD$ from Makefiles.

editors/nano: Update to 5.5

PR:		252749

editors/nano: Update to 5.4

editors/nano: Update to 5.3

- Update to 5.2
- Replace CONFIGURE_ENV by USES=pkgconfig. pkg-config will set the ncurses path
properly if the user has it installed via ports

PR:		248636

- Update to 5.0

- Update to 4.9.3

- Update to 4.9.2
- Fix variable expansion in MASTER_SITES

- Update to 4.8

- Update to 4.7

Use ${NCURSES_IMPL} instead of hardcoding ncursesw

- Update to 4.6

Drop workaround for qemu-user-static hang after r517350

GSlice as used by qemu-user still aborts due to low RLIMIT_VMEM in an
emulated application but no longer hangs. While the behavior differs
from real hardware it matches the one from before r456518 that was
hardcoded as gl_cv_func_printf_enomem=no workaround.

PR:		224740

- Update to 4.5

- Update to 4.4

- Use "localbase" instead of CPPFLAGS

Reported by:	pkubaj

- Update to 4.3
- Re-introduce CPPFLAGS. Without it the configure test for libintl fails and
nano crashes when the user selects one of the NLS supported languages

PR:		239189

editors/nano: Make several port improvements

  * Switch to https:// MASTER_SITES
  * Use provided .xz for distribution file, saving: 50.5% / 1415kB
  * Add LICENSE_FILE
  * Remove CPPFLAGS/LDFLAGS variables, added 19 years ago when the port
    was first created. [1] They are incorrectly (globally) scoped, no
    longer necessary and incorrect for the ncurses:base case. Instead use
    Uses/ncurses.mk variables and provide these to configure to ensure
    includes/lib searches and linking are never mixed between base and
    ports.

[1] ports r29979

Approved by:		danilo (maintainer)
MFH:			2019Q2 (blanket: bugfix)
Differential_Revision:	D20660

- Update to 4.2

- Update to 4.1

This release has fixes for many issues found in 4.0 including a possible crash
Eg:
- https://savannah.gnu.org/bugs/?56023
- https://savannah.gnu.org/bugs/?56117
- https://savannah.gnu.org/bugs/?56119
- https://savannah.gnu.org/bugs/?55997
- https://savannah.gnu.org/bugs/?56076

Reported by:	Benno Schulenberg
MFH:		2019Q2

- Update to 4.0

editors/nano: Fix build (configure) on ARM

The arm package builder when building this port, fails with the following
error during configure:

  checking whether printf survives out-of-memory conditions...
  =>> Killing runaway build after 21600 seconds with no output

The root cause is described in bug 224740, which has not been resolved yet:

  low RLIMIT_VMEM hangs qemu due to GSlice allocation failure

In the meantime, this change applies a known workaround which has already
been applied in several ports, which disables the specific (hanging) configure
check, if the build is run with qemu emulation.

PR:		231346, 224740
Reported by:	many
Approved by:	portmgr (blanket: build fix, jfi)
MFH:		2018Q4

- Remove groff dependency. The tarball already has the HTML files
- Remove unecessary REINPLACE_CMD
- Use post-install-{EXAMPLES,DOCS}-on to install the extra files

while here:
- Disable groff execution by the configure script

PR:		234000
Submitted by:	Daniel Eisele <daniel_eisele AT gmx.de>

- Update to 3.2

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

- Update to 3.1

- Fix a misbinding of <Bsp>

When curses gives no code for Ctrl+Shift+Delete, do not fall back
to KEY_BACKSPACE, because then ^H and/or <Backspace> get bound to
'cutwordleft'.

This fixes https://savannah.gnu.org/bugs/?54642.

Bug was introduced with version 3.0, commit e6429e78.

Reported by:	eadler

- Update to 3.0

- Update to 2.9.8

- Update to 2.9.7

- Update to 2.9.6

- Update to 2.9.5

- Update to 2.9.4

- Update to 2.9.3

- Update to 2.9.2

- Update to 2.9.1

- Update to 2.8.7

- Update to 2.8.6

- Update to 2.8.5

Register groff dependency which is used to generate the html documents
when DOCS is on

- Update to 2.8.4

- Update to 2.8.2

- Update to 2.8.1

PR:		218518

- Update to 2.8.0

- Update to 2.7.5

- Update to 2.7.4

- Update to 2.7.3

- Update to 2.7.2

- Update to 2.7.1

- Update to 2.7.0

editors/nano: document ncurses requirement (USES+=ncurses)

approved by:	infrastructure blanket

- Update to 2.4.3

- Update to 2.4.2

- Update to 2.4.1

- Simplify MASTER_SITES

Suggested by:	danfe

- Update to 2.4.0 [1]
- Add EXAMPLES option

Submitted by:	Leonardo Brondani Schenkel <leonardo@schenkel.net> [1]

- Use options helpers
- Simplify Makefile
- Take maintainership

Cleanup plist

Hand back my ports to the pool.

Ports require time and TLC which I no longer have.

Remove trailing whitespaces from category editors

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Fix properties on pkg-plist

- Convert to staging

Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)

- Remove the conflicts with itself
- Move sections to pet portlint

Remove now excess verbiage.

Reviewed by:	bapt

Convert to USES=gettext

Reviewed by:	kwm

- Fix pkg-plist for nano and nano-devel.
- Incorporate patches from nano into nano-devel
- Other misc. fixes

Fix pkg-plist

- Pet portlint
- Move LICENSE to appropriate place
- Teach portscout that only even versions count

oops, committed from the wrong directory.

Pointyhat to: eadler
Feature safe: yes

Convert to OptionsNG

Feature safe:	yes

Trim the headers in the ports I maintain.

Don't support pre 7.1 anymore.

- Another index fix

- Get rid FreeBSD 6 support

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

- change the email address I use to maintain ports

Approved by:    bapt (mentor)

- Update to 2.2.6

PR:             ports/152481
Submitted by:   Eitan Adler <lists@eitanadler.com> (maintainer)

- Update to 2.2.5

PR:             ports/149483
Submitted by:   Eitan Adler <lists@eitanadler.com> (maintainer)

- Update maintainer's email address

PR:             ports/148497
Submitted by:   Eitan Adler <eitanadlerlist@gmail.com> (maintainer)