2011-11-06 devel/soup: Unmaintain, use devel/libsoup
2011-11-06 graphics/clutter-qt: upstream distfile and doesn't build, and doesn't
seem to be developed anymore
2011-11-06 graphics/p5-clutter: upstream distfile disappeard, and doesn't seem
to be developed anymore
2011-11-06 graphics/librsvg: unmaintained and not used anymore

librsvg 1 and its perl bindings are unmaintained and not use anymore by any
ports, deprecate them

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Fix fetching

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use libtool15 port instead of included version to avoid objformat a.out botch

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Update WWW: line

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Fix build with freetyp2-2.1.7.

Reported by:    bento via kris

- Add SIZE to GNOME ports

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

Use USE_GNOMENG.

Put USE_LIBTOOL back.

Bump PORTREVISION after the freetype2 shlib major update.

Chase increase of freetype2 shlib version.

Update to 1.0.3.    

Update version number of freetype2 shared library.    

Backout previous change - it seems that new revision of the patch doesn't  
apply everywhere.    

Don't filter libc_r on 5-CURRENT.    

Add missed popt into LIB_DEPENDS.    

Don't link in libc - FreeBSD doesn't need this.    

Update to 1.0.2.    

Don't build test cases - they never get installed anyway, while require library 
 which is not in the LIB_DEPENDS, which breaks bento builds.    

Update version number of freetype2 shared library.    

Update to 1.0.1.    

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

The librsvg library is a lightweight library for parsing and rendering  
vector-graphic files in SVG format (like the ones made by sodipodi). It also  
includes functions that render anti-aliased fonts using freetype, including  
caching of glyphs. It's used by Nautilus for drawing vector icons and  
anti-aliased type.