graphics/nurbs++: Move man pages to share/man

Approved by:	portmgr (blanket)

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

*/*: Replace USE_GCC=any with USE_GCC=yes

USE_GCC=any has been equivalent to USE_GCC=yes in most cases (such
as i386 and amd64 since 12.x and depending on configuration 11.x,
most newer installations on other platforms, and 13.x across the
board).

Since commit 96c17633d90386b5bcf8 Mk/bsd.gcc.mk is treating them as
different spellings of the same, so continue the deorbiting of the
USE_GCC=any form and simply replace it with USE_GCC=yes.

This should not make any functional difference at all.

Discussed with:	mat, linimon, pkubaj

Remove # $FreeBSD$ from Makefiles.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

- Resurrect; unbreak on all supported versions of FreeBSD (and 8.X)
- Drop leading indefinite article from COMMENT text
- Stagify, convert to USES=libtool, switch to .tar.bz2 distfile

- Kill graphics/nurbs++ -- can't be built on any supported version

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- This is too messy to be fixed to build with clang right now.. USE_GCC=any

Feature safe:	yes

-remove MD5

Sync to new bsd.autotools.mk

- Switch SourceForge ports to the new File Release System: categories starting
with G

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

My reference e-mail address as a ports maintainer is now gahr@FreeBSD.org.

Approved by:    miwi (mentor)

- Fix build with gcc 4.2
- Pass maintainership to submitter

PR:             120626
Submitted by:   Pietro Cerutti <gahr@gahr.ch>

BROKEN with gcc 4.2

Use libtool port instead of included version to avoid objformat a.out botch

- Unbreak on 5.X and above: fix compile with gcc34

PR:             ports/106117
Submitted by:   Peter Johnson <johnson.peter@gmail.com>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

BROKEN on 5.x: Does not compile with gcc 3.4.2

Tidy up whitespace.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

SIZEify.

de-pkg-comment

Fix PORTCOMMENTs that were killing INDEX builds.

105 pointy hats to:     me
Approved by:            pat

add missing files

upgrade to 3.0.11

PERL -> REINPLACE_CMD

PR:             39938
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

Remove #include <malloc.h>

- Add missing INSTALLS_SHLIB   - Sort pkg-plist    

Convert category graphics to new layout.  

Add WWW to DESCR.    

Add nurbs++, a C++ library for representing curves or surfaces.