*/*: Remove BROKEN in all ports that uses bsdforge.com for MASTER_SITES

Site is now back up

Reported by:	Jamie Landeg-Jones <jamie@catflap.org>, Chris
<portmaster@bsdforge.com>
Approved by:	portmgr (blanket)

*/*: Mark all ports that uses bsdforge.com in MASTER_SITES broken

The domain bsdforge.com has expired, mark all ports that only
uses bsdforge.com as broken (unfetchable). Additionally set ports that
uses bsdforge.com as primary site and have broken mirrors as broken
too as they're also unfetchable.

Approved by:	portmgr (blanket)

*/*: Bump PORTREVISION for Ghostscript 10 change

Reported by:	sunpoet
Approved by:	jrm (mentor), sunpoet
Differential Revision:	https://reviews.freebsd.org/D42412

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

Remove # $FreeBSD$ from Makefiles.

Switch MASTER_SITES and WWW to https in Chris' ports.

PR:		241272
Submitted by:	Chris Hutchinson <portmaster@bsdforge.com> (maintainer)

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

print/font2svg: unbreak

- new distsite, new WWW
- submitter becomes maintainer
- LICENSE added

PR:		206181
Submitted by:	Chris Hutchinson <portmaster@bsdforge.com>

Mark a few ports BROKEN: unfetchable

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

cleanup plist

Stagify.

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- Kick MD5 Support

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove USE_REINPLACE from all categories starting with P

- Add SHA256

upgrade to 1.0

- Update to 0.1.5

PR:             ports/73467
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

SIZEify.

Use the new ghostscript options.

Submitted by:   linimon

KATO mega patch

- ECHO -> ECHO_MSG

For some ports:
- pre-fetch -> pre-everything
- ECHO -> ECHO_CMD

PR:             ports/56820-56858
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

[PATCH] print/font2svg: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

PR:             ports/54940
Submitted by:   Jens Rehsack <rehsack@liwing.de>

author import my patch without release a new version

Noted by:       kris

De-pkg-comment.

add font2svg
All font to svg-font converter