Port details |
- py-django-filer File and Image Management Application for django
- 3.1.0_1 www =2 3.1.0_1Version of this port present on the latest quarterly branch.
- Maintainer: xenophon+fbsdports@irtnog.org
- Port Added: 2012-06-28 02:27:50
- Last Update: 2024-04-27 09:08:48
- Commit Hash: 680c68f
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD2CLAUSE
- WWW:
- https://github.com/stefanfoulis/django-filer
- Description:
- django-filer is a file management application for django. It handles
uploading and organizing files and images in contrib.admin.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}django-filer>0:www/py-django-filer@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/www/py-django-filer/ && make install clean
- To add the package, run one of these commands:
- pkg install www/py-django-filer
- pkg install py39-django-filer
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-django-filer listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-django-filer
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1698834039
SHA256 (django-filer-3.1.0.tar.gz) = a69db306f9495f30ba67046cca166dc8a7f73f69ed90bc302767e6d9ca991cca
SIZE (django-filer-3.1.0.tar.gz) = 1109438
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-django42>=3.2<5.1 : www/py-django42@py39
- py39-django-easy-thumbnails>0 : graphics/py-django-easy-thumbnails@py39
- py39-django-polymorphic>0 : www/py-django-polymorphic@py39
- py39-pillow>0 : graphics/py-pillow@py39
- py39-pillow-heif>0 : graphics/py-pillow-heif@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for py39-django-filer-3.1.0_1:
HEIF=on: ISO/IEC 23008-12:2017 HEIF file format support
===> Use 'make config' to modify these settings
- Options name:
- www_py-django-filer
- USES:
- python
- pkg-message:
- For install:
- Add "filer" and related apps to your INSTALLED_APPS setting and run
manage.py migrate:
INSTALLED_APPS = [
...
'easy_thumbnails',
'filer',
'mptt',
...
]
Note that easy_thumbnails also has database tables and needs a
manage.py migrate.
For easy_thumbnails to support retina displays (recent MacBooks, iOS) add to
settings.py:
THUMBNAIL_HIGH_RESOLUTION = True
If you forget this, you may not see thumbnails for your uploaded files. Adding
this line and refreshing the admin page will create the missing thumbnails.
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
3.1.0_1 27 Apr 2024 09:08:48 |
Kai Knoblich (kai) |
*: Switch consumers over to Django 4.2
Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.
* Switch most ports that use www/py-django32 to www/py-django42.
* Ports that are not compatible with Django 3.2 have already been set
with an expiration date were not taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 276319
Reviewed by: dvl, grembo, ultima
Approved by: bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
ultima, maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D44637 |
3.1.0 20 Nov 2023 11:25:44 |
Kai Knoblich (kai) |
www/py-django-filer: Update to 3.1.0
* Introduce default option HEIF to reflect the settings as defined
in setup.py.
* Remove no longer required patch.
Changelog:
https://github.com/django-cms/django-filer/releases/tag/3.1.0
PR: 274890
Approved by: portmgr (maintainer timeout, 14+ days) |
2.1.2_1 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.1.2_1 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.1.2_1 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
2.1.2_1 20 Jul 2022 14:23:26 |
Tobias C. Berner (tcberner) |
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above ) |
2.1.2_1 28 Apr 2022 10:02:15 |
Kai Knoblich (kai) |
www/py-django32: Switch consumers over to Django 3.2
Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.
* Switch the most ports that use www/py-django22 to www/py-django32
* Switch www/seahub over to www/py-djangorestframework
* Ports that are not yet ready for Django 3.2 (only three so far) or
those that have already been set with an expiration date were not
taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 261313
Reviewed by: bofh, dvl, koobs, ultima
Approved by: bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
Alexander Sieg (maintainers)
maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D34859 |
2.1.2 10 Feb 2022 11:43:19 |
Kai Knoblich (kai) |
www/py-django-filer: Update to 2.1.2
Changelog:
https://github.com/django-cms/django-filer/compare/1.7.0...2.1.2
PR: 261478
Approved by: maintainer timeout (2+ weeks) |
1.7.0 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.7.0 23 Apr 2020 10:53:57 |
kai |
www/py-django-filer: Update to 1.7.0
* Also assign the port to Django 2.2 because Django 1.11 is End-of-Life
since April.
* Do the the same for its dependencies and bump PORTREVISION
accordingly. [1] [2]
Changelog:
https://github.com/divio/django-filer/blob/1.7.0/CHANGELOG.rst
PR: 245470, 245472 [1] 245473 [2]
Approved by: maintainer timeout (14 days) [1],
Kevin Golding (maintainer) [2] |
1.3.2_2 11 Apr 2020 10:15:06 |
kai |
www/py-django_polymorphic: Rename to py-django-polymorphic, Update to 2.1.2
* Use this update, which introduced support for Django 2.2 in the 2.1.0
release, as preparation to switch from Django 1.11 (End-of-Life) to
Django 2.2 (current LTS release) once the update for www/py-django-filer
lands [1].
* Rename the port to match the canonical name at PyPI.
* Update the WWW field to spare users from redirects and fix a whitespace
issue in the pkg-descr.
* Bump PORTREVISION of its consumer www/py-django-filer due changed
dependencies.
Changelog:
https://github.com/django-polymorphic/django-polymorphic/blob/v2.1.2/docs/changelog.rst
PR: 245473, 245470 [1]
Approved by: Kevin Golding <ports@caomhin.org> (maintainer) |
1.3.2_1 24 Mar 2020 19:54:57 |
antoine |
Convert the tree to use PY_PILLOW
With hat: portmgr
Originally submitted by: kai |
1.3.2_1 24 Feb 2020 11:36:16 |
kai |
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version (Only the first 15 lines of the commit message are shown above ) |
1.3.2 14 Aug 2019 12:25:09 |
mat |
Convert to UCL & cleanup pkg-message (categories w) |
1.3.2 21 May 2018 16:02:10 |
miwi |
- Update to 1.3.2
PR: 228136
Submitted by: freebsd_ports@k-worx.org
Approved by: maintainer
Sponsored by: iXsystems Inc. |
0.8.6_3 25 Apr 2018 16:42:38 |
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
0.8.6_3 08 Feb 2018 20:18:09 |
amdmi3 |
Canonicalize PyPi WWWs:
- Switch to https://
- Remove trailing slashes
Approved by: portmgr blanket |
0.8.6_3 30 Nov 2017 15:50:34 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
0.8.6_3 01 Apr 2016 14:33:58 |
mat |
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight |
0.8.6_3 16 Jan 2016 11:19:09 |
miwi |
- Switch forgotten ports over to py-django18
- Fix PYTHON_PKGNAMEPREFIX
Reported by: antoinebot |
0.8.6_3 16 Jan 2016 09:52:37 |
miwi |
- Switch all ports to www/py-django18
- Bump PORTREVISION |
0.8.6_2 07 Oct 2014 11:51:13 |
wg |
www/py-django-filer: switch from py-imaging to py-pillow
- USES python
With hat: python
Approved by: portmgr (bdrewery, implicit) |
0.8.6_1 29 Jan 2014 13:21:32 |
miwi |
- Stage support
- Convert to PYDISTUTILS_AUTOPLIST
- Bump PORTREVISION |
0.8.6 20 Nov 2013 20:51:25 |
sunpoet |
- Update WWW:
- http://cheeseshop.python.org/ -> https://pypi.python.org/
- http://pypi.python.org/ -> https://pypi.python.org/
With hat: python
Approved by: bapt (portmgr) |
0.8.6 20 Sep 2013 23:36:54 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
www) |
0.8.6 28 Jun 2012 02:27:17 |
sunpoet |
- Add py-django-filer 0.8.6
django-filer is a file management application for django. It handles
uploading and organizing files and images in contrib.admin.
WWW: http://pypi.python.org/pypi/django-filer/
WWW: https://github.com/stefanfoulis/django-filer
PR: ports/169249
Submitted by: Matthew X. Economou <xenophon+fbsdports@irtnog.org> |