Remove www/squid32 and 4 ports dependent on www/squid (v2.7)

The www/squid port, which is also expired, will be upgraded to Squid
version 3.4 rather than removing it.

Retire Squid 3.2 on 15 September 2015

Squid 3.2 reached EOL when Squid 3.3 was released, and now Squid 3.4
is out.  Squid only supports one stable release at a time.  There are
no dependent ports on Squid 3.2.  Users are recommended to move to
(unsupported) Squid 3.3 or introduce Squid 3.4 to ports.

www/squid32: Remove non-existent MASTER_SITES

www/squid32: Use wildcards on SHEBANG_FILES to compress 24 lines to 1

Stage www/squid32

PR:		189902
Submitted by:	joe (thralling.com)
Lotsa TLC:	marino

www/squid, squid32, squid33: Reset maintainer

At least 2 PRs per port have been submitted to provide staging going back
to May, but the maintainer has not responded.  These PRs prevented the
maintainer from being reset on the big pass, so do it now that there are
only 2 weeks left to stage these ports.

Approved by:	portmgr (implicit, NOT_STAGED)

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

Fix some non default LIB_DEPENDS

With hat:	portmgr

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Fix build with TP_PF option enabled with clang

Approved by:	portmgr (mat)

Fixup pkgnames.

PR:		ports/184440, ports/184441, ports/184442, ports/184443, ports/184444,
ports/184445, ports/184446, ports/184447, ports/184448, ports/184449,
ports/184450
Submitted by:	mat
Approved by:	portmgr (bapt)

Fix build with ECAP.

USES can't be fiddled with after including bsd.port.pre.mk.

maintainer timeout

PR:		ports/183894
Submitted by:	mat

Fix build on FreeBSD >= 10.0

PR:		ports/183352
Submitted by:	dim
Approved by:	maintainer timeout

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

Security update to www/squid32 and www/squid33 to 3.2.13 and 3.3.8 in order
to address remote denial of service vulnerability.

Security:	30a04ab4-ed7b-11e2-8643-8c705af55518
With hat:	ports-security

- Move Squid's IPC work directory from /var/squid/run/squid/ to
  /var/run/squid/. This should fix issues with SMP mode [1].
- Rename some variables in pkg-install.in to be consistent with pkg-deinstall.
- Fix the path of the default cache directory in pkg-message.in.
- Otherwise no user visible changes.

PR:		ports/178304 [1]
Approved by:	flo (mentor)

Fix the noipv6 patch.

Pointy hat to: tmseck

Approved by:	flo (mentor)

- Update to 3.2.11
- Add a patch to correct the default "localhost" ACL in squid.conf for
  IPv4-only systems [1]

PR:		ports/176951 [1]
Submitted by:	Oleg Strizhak
Approved by:	crees (mentor)

pkgconfig:build will suffice.

Approved by:	portmgr (bapt)

Fix typo in USES.

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

- Update to 3.2.9
- Fix portlint(1) warnings

Approved by:	flo (mentor)

- Fix build with clang
- Convert NOPORTDOCS/NOPORTEXAMPLES to new options framework

Submitted by:	sunpoet (myself)
Approved by:	tmseck (maintainer)

- Update to 3.2.8.
- Change MAINTAINER to my FreeBSD.org address

Approved by:	flo (mentor)

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: www)

Approved by:	portmgr

- update to 3.2.7
- use USE_GCC= any on head to unbreak the build for now

Submitted by:	tmseck

www/squid3x: upgrade to 3.1.23 and 3.2.6

Squid 3.1.23 is effectively Squid 3.1.22_2 with the final fix for
CVE-2012-5643 applied.

Squid 3.2.6 also received that abovementioned fix, but in comparison
with 3.2.5 from ports it has another change that fixes handling the
"tcp_outgoing_tos" directive for BSD-like systems, including FreeBSD,
  http://bugs.squid-cache.org/show_bug.cgi?id=3731

VuXML entry for SQUID:2012-1 (aka CVE-2012-5643) was also updated to
reflect the proper version specifications from the updated advisory,
  http://www.squid-cache.org/Advisories/SQUID-2012_1.txt

Approved by:	Thomas-Martin Seck <tmseck@web.de>
Security:	http://portaudit.freebsd.org/c37de843-488e-11e2-a5c9-0019996bc1f7.html
QA page:	http://codelabs.ru/fbsd/ports/qa/www/squid31/3.1.23
QA page:	http://codelabs.ru/fbsd/ports/qa/www/squid32/3.2.6

Update to 3.2.5 + a few upstream patches

PR:		ports/174680
Submitted by:	maintainer

Update cyrus-sasl2 to 2.1.26.
This bumps shlib version of libsasl2.

- update to 3.2.4 plus vendor patch 11738
- install the kerberos_ldap_group external helper when Kerberos, SASL and
  LDAP authentication are selected (this update supersedes PR ports/173564
  that can be closed)
- whitespace fixes

PR:		ports/174300
Submitted by:	Thomas-Martin Seck <tmseck@web.de> (maintainer)

Fix rc.d script to support systems before and after ${name}_fib is introduced
into rc.subr.  Bump PORTREVISION.

Feature safe:	yes

Style fixes to rc script

Approved by:	Thomas-Martin Seck (maintainer)
Feature safe:	yes

- fix process detection in Squid's rc.d script [1]
- remove a leftover substitution with a hard coded value
- remove a few comments which were accidentally left in from development
- rework the code that deals with kerberos negotiate auth a bit
- bump PORTREVISION for the squid rc.d script update

PR:		ports/173236 [1]
PR:		ports/173248
Submitted by:	Thomas-Martin Seck <tmseck@web.de> (maintainer)
Reported by:	Leonid Nevecherya <nlv@imbera.ru> [1]
Feature safe:	yes

- add www/squid32 [1]
- update www/libecap to 0.20 [2]
- remove option ECAP from www/squid31 and add a note to UPDATING that you need
  to upgrade to squid32 if you need ECAP

PR:		ports/173152 [1]
PR:		ports/173156 [2]
Submitted by:	Thomas-Martin Seck <tmseck@web.de>
Feature safe:	yes