Remove expired port:
2015-03-14 www/squid33: Reached EOL on 28 August 2014, use www/squid (v3.4)
instead

www/squid33: Fast track removal to 14 March 2015

This port was supposed to be removed 31 Jan 2015, but it was extended
four months.  A few days later the bug that it was extended for was
fixed and is already in www/squid (3.4.12)

Therefore, cancel the rest of the extension and remove this port in
two weeks.

www/squid33: Fix [-Werror=logical-not-parentheses] (gcc5)

Fix logical evaluation of condition (caught by gcc5)

www/squid33: move EXPIRATION_DATE to 2015-05-31

Reason: ntlm_auth issue with www/squid, see
http://bugs.squid-cache.org/show_bug.cgi?id=3997

PR:		195556
Submitted by:	timp87@gmail.com

Add CPE info to squid ports.

Requested by:	des@

- Unbreak ECAP option

Update squid to 3.4.8 and add patches to squid33.

This update addresses CVE-2014-6270.

PR:		193737
Submitted by:	timp87 at gmail.com

www/squid and www/squid33: Fix plist error depending on selected options

PR:		193717
Reported by:	kib@
Fixed by:	timp87 (gmail)

www/squid33: Update deprecation message with a more accurate EOL date

www/squid: Upgrade version 2.7.9 => 3.4.7

From now on, there will only be one squid port, this one.  Squid33 has
been deprecated and will expire on 31 JAN 2015.

PR:		192828
Submitted by:	timp87 (gmail)
Contributions:	takefu (airport.fm), Dennis Glatting

Package empty directories

www/squid33: Upgrade version 3.3.11 => 3.3.13

Refactored the makefile again, added urls for known bugs in the makefile,
Removed FS_COSS from options (broken everywhere).  The new versions bring
in fixes from upstream too.

PR:		192983
Collaboration:	timp87 and ohauer@

www/squid33: Clarify option for http-violations

The option STRICT_HTTP was highly misleading.  If enabled, it disabled
strict checking, the opposite of what somebody would reasonably assume.
Rename the option to LAX_HTTP and improve the description to ward off
potential confusion.

PR:		192980
Reported by:	screenblack (gmail)

www/squid33: Support Kerberos on DragonFly

DragonFly does not have Kerberos in the base system as this port assumes.
In order to build squid33, DF has a dependency on krb5 packages.  Morever,
the configure check assumes Kerberos is in the base system, so it fails
to configure.  Disable the check completely as it's guaranteed to pass on
FreeBSD and the sought headers are installed with krb5.

www/squid33: Fix plist for options, enable keytab only for squid

PR:		192913
Submitted by:	timp87

www/squid33: Convert to static pkg-list, use option configuration

Also remove the IPv6 disabled patch.

PR:		192846
Submitted by:	takefu (airport.fm)

www/squid33: Fix basic_auth helper, cleanup, and rework @sample files

  basic_db_auth ext_sql_session_acl is not installed it's perl5.16 later
  WARNING: no_suid: setuid(0): (1) Operation not permitted
    http://www.squid-cache.org/mail-archive/squid-users/201301/0390.html
    http://www.squid-cache.org/mail-archive/squid-dev/201305/0172.html
  Change to .sample from .default the configuration file name
  use criteria change of clang
  The trimmed of PLIST_FILES
  It does not require the deletion of .orig .bak.

PR:		192824
Submitted by:	takefu (airport.fm)

www/squid33: Use @sample with 5 conf files to avoid overwrites

Stage www/squid33

This port needed a *lot* of love, and it needs a lot more.  It has a
ton of options (Do we need so many options rather than enabled by
default?) and I suspect many options aren't staged properly.  Also the
way the plist is put together is crazy.  This needs a proper static
pkg-plist with PLIST_SUB switches.  This port badly needs a full-time
maintainer.  (www/squid32 and www/squid are just as bad)

I also added patch from PR 192119 while I was here.

PR:		189903
Submitted by:	joe (thralling.com)
Lotsa TLC:	marino

www/squid, squid32, squid33: Reset maintainer

At least 2 PRs per port have been submitted to provide staging going back
to May, but the maintainer has not responded.  These PRs prevented the
maintainer from being reset on the big pass, so do it now that there are
only 2 weeks left to stage these ports.

Approved by:	portmgr (implicit, NOT_STAGED)

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

Fix some non default LIB_DEPENDS

With hat:	portmgr

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Fix build with TP_PF option enabled with clang

Approved by:	portmgr (mat)

Fixup pkgnames.

PR:		ports/184440, ports/184441, ports/184442, ports/184443, ports/184444,
ports/184445, ports/184446, ports/184447, ports/184448, ports/184449,
ports/184450
Submitted by:	mat
Approved by:	portmgr (bapt)

Update to 3.3.11.

Approved by:	crees (Mentor)

Fix build with ECAP.

USES can't be fiddled with after including bsd.port.pre.mk.

maintainer timeout

PR:		ports/183894
Submitted by:	mat

- fix build on FreeBSD >= 10.0 [1]
- update to 3.3.10

PR:		ports/183352
Submitted by:	dim [1]
Approved by:	maintainer timeout

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

Update to 3.3.9.

Approved by:	crees (mentor)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

- Update rc script to fix squid_fib handling [1]
- Add patchsets 12594-12601 from upstream

Approved by:	crees (mentor)
Obtained from:	kib [1], hrs [1]

Security update to www/squid32 and www/squid33 to 3.2.13 and 3.3.8 in order
to address remote denial of service vulnerability.

Security:	30a04ab4-ed7b-11e2-8643-8c705af55518
With hat:	ports-security

- Update to 3.3.5 including vendor patches 12566 to 12572
- Remove some leftovers from the repocopy of squid32 [1]
- Move the creation/deletion of the Squid state directory from
  pkg-install/pkg-deinstall to rc.d/squid [2]
- Add a squid_getpid function and update the procname pattern to get
  the correct name and PID of Squid's master process

PR:		ports/178511 [1]
Submitted by:	crees [2]
Approved by:	crees (mentor)

- Move Squid's IPC work directory from /var/squid/run/squid/ to
  /var/run/squid/. This should fix issues with SMP mode [1].
- Rename some variables in pkg-install.in to be consistent with pkg-deinstall.
- Fix the path of the default cache directory in pkg-message.in.
- Otherwise no user visible changes.

PR:		ports/178304 [1]
Approved by:	flo (mentor)

Add www/squid33.

Approved by:	flo (mentor)