www/yaws: update to 2.2.0

- pet via portclippy & portfmt while here

Sponsored by:	SkunkWerks, GmbH

www/yaws: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www/yaws: update to 2.1.0

Reported by:	Peggy Wilkins <mozart@lib.uchicago.edu>

www/yaws: Add CPE information

Approved by:	portmgr (blanket)

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update www/yaws to version 2.0.6.

Transfer more Erlang ports to erlang@.

Update www/yaws to version 2.0.5.

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Update www/yaws to version 2.0.4.

Update www/yaws version 2.0.3.

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Upgrade www/yaws to version 2.0.2.

Upgrade www/yaws to version 2.0.1.

Upgrade to version 2.0.

Compatibility fix for R18.

Set the default yaws_enable to NO.

Do not let the build hostname creep into the sample configuration file.

Upgrade to version 1.99.

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

Cleanup plist

- Remove redundant MASTER_SITES
- Replace USE_GMAKE with USES
- Fix COMMENT
- Fix USE_AUTOTOOLS assignment

Submitted by:	danfe

- Upgrade to version 1.98
- Switch to github

- Upgrade to version 1.97.
- Add staging support.
- Fix sample configuration file.

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

Remove symbolic link from yaws-1.96 to yaws.

It caused "rebar generate" invocations to fail when Yaws was included,
due to duplicate application directories with the same version.

Also, add devel to CATEGORIES.

- Upgrade to version 1.96.
- Following r312864, remove ONLY_FOR_ARCHS.

Convert Makefile headers to the new format in my ports.

Fix handling of source paths containing tilde characters in
yaws_compile.erl.

Already patched upstream on github as klacke/yaws/25b8e4c.

Feature safe:	yes

Upgrade to version 1.95.

Feature safe:	yes

Replace spaces with tabs in assignments.

Compatibility fixes for Erlang R15B01.

Specifically, on R15B01 the sendfile function does not require a
separate port driver.

Convert to OptionsNG.

Pet portlint and fix ${FIND} expression.

Upgrade to version 1.94, which includes an improved security patch.

Upgrade to version 1.93, which contains a security fix among other changes.

From Erlyaws-list:

"Use crypto:rand_bytes() instead of the cryptographically weak random
module. Swedish security consultant and cryptographer Kalle
Zetterlund discovered a way to - given a sequence of cookies produced
by yaws_session_server - predict the next session id. Thus providing
a gaping security hole into yaws servers that use the yaws_session_server
to maintain cookie based HTTP sessions (klacke/kallez)"

PR:             ports/169363
Submitted by:   Kenji Rikitake <kenji.rikitake@acm.org>

Upgrade to version 1.92.

Upgrade to version 1.91.

Submitted by:   Kenji Rikitake <kenji.rikitake acm org>

Chase checksum change.

A few minor fixes were merged upstream, including handling of delayed redirects.

Upgrade to version 1.90.

- Get Rid MD5 support

Upgrade to version 1.89.

Clean up my pkg-descr files (spelling and whitespace).

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Upgrade to version 1.88.

- update to jpeg-8

Upgrade to version 1.87.

Upgrade to version 1.86.

Upgrade to version 1.85.

Upgrade to version 1.84.

Upgrade to version 1.83 (and use WWWDIR in Makefile).

Add warning about the new configuration file path.

Force rebuild with R13B01.

Upgrade to version 1.82.

Upgrade to version 1.81.

Upgrade to version 1.80.

Optionally allow users to disable the native sendfile(2) interface.

This is needed if you are cross-compiling to win32 and need yaws to be a pure
Erlang application.

Upgrade to version 1.79.

Force rebuild with R12B-5.

Upgrade to version 1.77.

Bump PORTREVISION to rebuild with new Erlang/OTP release.
Sync ONLY_FOR_ARCHS with the main Erlang port.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Upgrade to version 1.76.

Upgrade to version 1.75.

Restore NOPORTDOCS support.

Noticed by:     sat

Upgrade to version 1.73.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Upgrade to version 1.68.

Upgrade to version 1.66.

Upgrade to version 1.65.

Enable debug info to make OTP's xref(3) module work.

Upgrade to version 1.64.

Upgrade to version 1.61.

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Upgrade to the final 1.58 release (this enables PAM support.)

Upgrade to version 1.58.

SHA256ify

Approved by: krion@

Upgrade to version 1.57.

Upgrade to version 1.56.

Upgrade to version 1.54.

? LOG
Index: Makefile
===================================================================
RCS file: /home/pcvs/ports/www/yaws/Makefile,v
retrieving revision 1.19
diff -u -r1.19 Makefile
--- Makefile    20 Feb 2005 15:46:58 -0000      1.19
+++ Makefile    19 Mar 2005 10:32:50 -0000
@@ -7,6 +7,7 @@

 PORTNAME=      yaws
 PORTVERSION=   1.53
+PORTREVISION=  1
 CATEGORIES=    www
 MASTER_SITES=  http://yaws.hyber.org/download/
Do not trigger a crash report when the server process exits using
the exit function.

Upgrade to version 1.53.

Upgrade to version 1.51.

Upgrade to version 1.49.

Add symlink for easier dependency specification.

Unbreak embedded mode.

Upgrade to version 1.48.

Upgrade to version 1.47.

Add missing header file to source directory.

Also install source, to aid debugging of embedded applications (as other
otp applications do).

Move OTP application to ${PREFIX}/lib/erlang/lib, so it is easier to build
releases without adding paths by hand.

* The startup script used to pull in a local path from ${WRKSRC}, so
the daemon would not start after "make clean" (!).

* Do not create empty EXAMPLESDIR.

Remove verbose option from cpio call.

Upgrade to version 1.45 (remove MASTER_SITE_SOURCEFORGE which has
1.41 only).

Remove USE_SIZE now that it's used by default.

BROKEN on !i386: Does not compile

Upgrade to 1.41 and USE_SIZE.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)