devel/py-pygobject: bump consumer PORTREVISIONs after port rename

With hat: gnome
PR: 273722

x11/guake: Clean up USES=python

USES=python means USES=python:3.8+ now.

Approved by:	portmgr (blanket)
With hat:	python

x11/guake: Update to 3.7.0

PR:		255721

*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

audio/opus: bump consumers after update to 1.4

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

x11/guake: Add CPE information

Approved by:	portmgr (blanket)

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Drop dependency on gconf, since the switch to gtk3 it is not needed anymore

Remove esound support from pulseaudio as audio/esound expired.

Bump PORTREVISIONs of dependent ports.

Build-tested in poudriere on a head-amd64 jail for audio/pulseaudio*

Clean up plist

Fix plist

x11/guake: Update to version 3.4.0

- Pass maintainership to submitter

PR:		232163
Submitted by:	Daniel Shafer <daniel@shafer.cc>
Approved by:	tcberner (mentor), nivit (maintainer timeout, 30 days)
Differential Revision:	https://reviews.freebsd.org/D17726

Cleanup plists

Make libgnome and libgnomeui not implying esound dependency

It has been a while both does not depend anymore on esound, before this change
esound dependency was wrongly added to plenty of packages which actually does
not depend on it.

While here:

- audio/glame: remove esound support
- games/monkeybubble: add an explicit dependency on esound
- sysutils/gnome-schedule: add en explicit dependency on pkg-config
- comms/kb: add missing dependency on pkgconfig
- x11-toolkits/libgnomeui:
  * update to 2.4.5
  * use USES=localbase

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

OPTIONS_SUB only cares about being defined, its content is ignored.

Sponsored by:	Absolight

- Update to 0.8.10
- Add LICENSE_FILE

ChangeLog:	https://github.com/Guake/guake/releases/tag/0.8.10

- Update to 0.8.8

Changes:	https://github.com/Guake/guake/releases/tag/0.8.8

Use PYTHON_PKGNAMEPREFIX instead of py${PYTHON_SUFFIX}-

- Add NO_ARCH
- Use bsd.port.mk instead of bsd.port.pre.mk + bsd.port.post.mk

Approved by:	portmgr (blanket)
With hat:	python

- Update to 0.8.7

ReleaseHistory:	https://github.com/Guake/guake/releases

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 0.8.4

- Update to 0.8.3

PR:	206100
Submitted by:	Neel Chauhan <neel@neelc.org>
Release notes:	https://github.com/Guake/guake/releases/tag/0.8.3

- Update to 0.8.0
- Add x11/keybinder to run dependencies
- Remove post-build target (globalhotkey replaced by keybinder)
- Update web site URL in pkg-descr

Relnotes:	https://github.com/Guake/guake/releases/tag/0.8.0

Part 1 of adding USE_GNOME=intltool to ports that require it.

The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.

PR:		201980
Exp-run by:	antoine@

- Update to 0.7.2

Relnotes:	https://github.com/Guake/guake/releases

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=autoreconf

- Remove instructions for fixing python command. It already
  has the correct version
- Bump PORTREVISION for those who have already updated the
  program via ports, and got the error:
    env: python2.72: No such file or directory
  at runtime

- Update to 0.5.2
- Use GitHub as download site. The old ones no longer
  have the distribution file
- Add devel/gnome-common to build dependencies
- Use option helpers
- Strip installed library

Relnotes:	https://github.com/Guake/guake/releases

Cleanup plist

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

- Fix problems with the location of the locale directory by setting
  CPPFLAGS and LIBS instead of using a patch
- Use option helpers for NLS option
- Add USES=libtool

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Fix properties on pkg-plist

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

- Change MASTER_SITES, and the name of the dist file, because
  the old site is apparently disappeared, although the project
  is now hosted at GitHub  [1]
- Bump PORTREVISION (change run-dependencies)
- Add support for staging
- Add desktop-file-utils to USES, and remove old, related stuffs
- Add a notification system to run dependencies (deskutils/notify-osd),
  otherwise the program doesn't start if you use a window manager
  different from Gnome or XFCE
- Use the new helpers to manage port options
- Fix WWW URL in pkg-descr

Build logs:	https://redports.org/buildarchive/20131030152201-15343/
PR:	ports/183439  [1]
Submitted by:	marino

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)

Add an explicit dependency on pkgconf

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Guake is a dropdown terminal made for the GNOME desktop environment,
but you can run it with TWM too ;-), if you install ports/x11/trayer
or a similar program.
Its style of window is based on fps games, and one of its purposes
is to be easy to reach.

WWW: http://guake.org