Update multimedia/x265 to 1.7, and bump PORTREVISION on its consumers.

- Use memalign hack only on supported systems that need it
  (FreeBSD on pre-10 systems)
- Bump PORTREVISION

multimedia/ffmpeg: Convert memalign-hack into an option

DragonFly already has an aligned malloc (posix_memalign) and the hack
in ffmpeg is tripping an assertion.  M.Dillon thinks the hack is stale.
In the spirit of no-op changes for FreeBSD, this changeset converts
the "--enable-memalign-hack" into an on-by-default option, and then
excludes the option for DragonFly.

It does incur a revbump though.
The last changes were made to multimedia/ffmpeg(0|26)
I'm doing this under "non-invasive DragonFly support" flag

P.S. I wouldn't be surprised if --enable-memalign-hack is wrong for
recent FreeBSD releases as well, so maybe the maintainers should take
a look at this new option.

multimedia/libvpx: update to 1.4.0

ABI isn't compatible, so bump PORTREVISION in consumers.

Changes:	https://chromium.googlesource.com/webm/libvpx/+/v1.4.0
Differential Revision:	https://reviews.freebsd.org/D2570
Exp-run by:	antoine
Approved by:	ashish, multimedia (kwm)
Approved by:	maintainer timeout (ale, dinoex; 2 weeks)

multimedia/ffmpeg{,26}: make GNUTLS and OPENSSL mutually exclusive

- make GNUTLS and OPENSSL mutually exclusive

Differential Revision:	https://reviews.freebsd.org/D2533
Reviewed by:	riggs

multimedia/ffmpeg: add CPE info

PR:		199966
Submitted by:	Shun <shun.fbsd.pr@dropcut.net>
Approved by:	portmgr blanket

Make BUILD_DEPENDS on texi2html conditionally (only if DOCS is selected)

PR:		199642
Submitted by:	rs@bytecamp.net

Update x265 to 1.6, and bump PORTREVISION on its consumers for shlib
version change.

multimedia category: Remove $PTHREAD_LIBS

approved by:	PTHREAD blanket

Update x265 to 1.5 and bump PORTREVISION on its consumers.

Remove duplicate armv6 conditional introduced in r377204

Submitted by:	antoine

These ports utilize GAS assembly and probably won't ever change.  For the ARM
case, do not use -integrated-as.

PR:	196660 196774 196775 196776
Submitted by:	mikael.urankar@gmail.com
Approved by:	mentor (inplicit)

Update to upstream version 2.3.6

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

- Drop .la files from multimedia/dirac and multimedia/schroedinger
- Bump dependent ports as .so versions have changed
- While here, remove @dirrm* from plists and add missing empty directory to
plist of multimedia/lives

Approved by:	portmgr blanket

multimedia/x264: General overhaul

- Split x264 into two ports: the CLI application (x264), and the library
  (libx264). This will allow x264 to use lavf and friends from ffmpeg for
  decoding and demuxing while preventing a circular dependency between the
  two: x264 can depend on ffmpeg, but ffmpeg will depend on libx264 rather
  than x264.
- Add the LAVF option to the CLI port, making the dependency on ffmpeg
  optional.
- Update to 0.142.2455.
- Amend fixes to local patches so that they can apply to the new upstream
  files.
- Provide the git revision and other version information to the build
  environment, allowing the CLI binary to display this information (like the
  Windows builds).
- Remove unsupported build options (X11_OUTPUT).
- Ensure that the library and CLI ports each have the appropriate options.
- Add notes for future contributors who wish to update the ports.
- Bump PORTREVISION for all dependent ports.

PR:           187805
Differential Revision:	https://reviews.freebsd.org/D1159
Submitted by: Andrew Berg <aberg010@my.hennepintech.edu>
Approved by:  koobs (maintainer, mentor)

Un-break non-default OPTION OPENSSL

PR:		195202
Submitted by:	jbeich@vfemail.net

Bump PORTREVISION on libx265 consumers after r372289.

PR:		194907
Submitted by:	Anton Sayetsky

Update to upstream version 2.3.5

While on it:
- Clean up pkg-plist

- Add X265 knob (default off) for X.265 (HEVC) encoding support using
  multimedia/x265.

  Example usage:  (-c:a libfdk_aac needs FDK_AAC knob too)

	ffmpeg -i $inputvideofile -c:a libfdk_aac -b:a 64k -c:v libx265 -x265-params
crf=31 $outputfile.mkv

  This can now be played back by at least ffplay (needs SDL knob),
  vlc, mplayer, mpv, xine.  (and gives a nice reduction in file size.)

No objection from:	multimedia@ list

- Fix build break if PULSEAUDIO is defined but not ALSA or LIBV4L

PR:		193657
Submitted by:	farid@hajji.name

- Update to upstream release 2.3.3
- Add USE_LDCONFIG
- Simplify some OPTIONS
- Pet portlint

- Fix build dependency on v4l2
- Bump PORTREVISION

PR:		193151
Submitted by:	jbeich@vfemail.net

- Drop unnecessary hunk for v4l2 from patch-configure

PR:		193150
Submitted by:	jbeich@vfemail.net

- Restore V4L2 interface

PR:		192579
Submitted by:	hselasky@FreeBSD.org

Chase library dependencies after libcdio <-> libcdio-paranoia split

PR:		192271

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

audio/rhythmbox: drop :keepla
multimedia/banshee: add USES=libtool and INSTALL_TARGET=install-strip
multimedia/libmtp: add USES=libtool and INSTALL_TARGET=install-strip
multimedia/libaacs:
- USES=libtool pathfix
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS
- Remove plist target, superseded by makeplist
multimedia/libbluray:
- USES=libtool pathfix
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS
- Remove plist target, superseded by makeplist
- Use OPTIONS_SUB
- Replace patch with post-patch command

Bump dependent ports

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

Add a global OPUS_DESC

multimedia/ffmpeg: fix ffserver startup script

PR:		191399
Submitted by:	m.ehinger ltur de

multimedia/ffmpeg: update to 2.2.4

- Bump dependent ports of libavutil
- USES tar:bzip2
- Use @sample in pkg-plist

Update openjpeg to 2.1.0.

Version 2.x is incompatible with openjpeg 1.5. Preserve it as openjpeg15
and update users.

Approved by:	portmgr (implicit) for NO_STAGE ports

Switch Opus to USES=libtool.
Bump dependent ports. [1]

Approved by:	portmgr (implicit) [1]

- Update libaacs to 0.7.0
  - Add LICENSE
  - USES tar:bzip2
- Update libbluray 0.5.0
  - Unbreak JAVA option
  - USES tar:bzip2
- Bump PORTREVISION in depdendent ports due to shared lib version bump

PR:		ports/188573
Submitted by:	Dominic Fandrey <kamikaze@bsdforen.de> (maintainer)
Approved by:	thierry (mentor)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update freetype to 2.5.2.

Remove patch to add -I/usr/local/include in freetype-config --cflags. If
ports need extra headers they should look for them, and not get them via
a side-effect.

Freetype had a header resuffle in 2.5.1, patch ports to use the new header
style.

Thanks go to bdrewery for the two exp-runs and rakuco for helping me with
some troublesome cmake ports.

PR:		ports/184587

- Update graphics/*opencv* to 2.4.7
- Revert options helpers to if statements since the OFF condition is not
  applied when OPTIONS_EXCLUDE is used
- Move most of the OpenCV modules from the graphics/opencv-core port to
  graphics/opencv, leaving opencv-core as just the bare minimum required
  for building ffmpeg with OpenCV support
- Install examples for python and java bindings
- Add new slave port graphics/opencv-java: Java bindings for OpenCV
- Bump PORTREVISION and make dependency adjustments and fixes for
  dependent ports
- Add UPDATING entry

multimedia/ffmpeg: update to 2.1.1

Changes: http://git.videolan.org/?p=ffmpeg.git;a=shortlog;h=n2.1.1

- Fix build with clang on i386

Reported by:	Herbert J. Skuhra <hskuhra@eumx.net>
Approved by:	wg

multimedia/ffmpeg: fix typo in port name

PR:		ports/183539

multimedia/ffmpeg: do not link to libs not selected

- ffmpeg build would link to libs like jack and SDL if they are not listed in
  --disable-{in,out}dev
- Add JACK option

PR:		ports/182167

- Split the library part of multimedia/rtmpdump into multimedia/librtmp.
- Update ports depending on librtmp.
- Add instruction to avoid a build error in multimedia/rtmpdump under a
  specific condition.

multimedia/ffmpeg: update to 2.1

Changes: http://git.videolan.org/?p=ffmpeg.git;a=shortlog;h=n2.1

multimedia/ffmpeg: update to 2.0.2

- Update to 2.0.2

multimedia/ffmpeg: add back PORTEPOCH

- Add back PORTEPOCH

Reported by:	many

multimedia/ffmpeg: pass maintainership

- Pass maintainership to multimedia@

Suggested by:	bapt

multimedia/ffmpeg: update to 2.0.1

- Update main ffmpeg port to 2.0.1
- Bump and update dependent ports when necessary (API change)

Approved by:	portmgr (bapt)

Fix build breakage caused by invalid sequence in protocols.texi.

PR:		182839
Approved by:	wg (maintainer)

multimedia/x264: Update to 20130827 snapshot

- Update to 20130827 snapshot
- Add CONFIGURE_ARGS to disable OpenCL, fixes configure failure
- Chase library version bump in dependent ports

PR:		ports/182484
Submitted by:	mm
Reviewed by:	kwm, bapt

multimedia/ffmpeg: fix typo

- Fix typo

Submitted by:	pawel

multimedia/ffmpeg: allow staging

- Allow staging
- Reorder to pet portlint

- Adopt ffmpeg ports

They are in the pool for some time now and nobody stepped up so I'll give it
a shot.

Returning maintainership on my multimedia ports to ports@freebsd.org

Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

- set CONFLICTS for libav and ffmpeg, since they both install files in
  the same location
- bump PORTREVISION, so users can solve the conflict on existing
  installations

Reported by:	kwm@

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Finish converting the whole ports tree to USES=pkgconfig

Update multimedia/ffmpeg to 0.7.15

Depend on pkgconfig on build stage

PR:		ports/170453

Link ffmpeg compat headers instead of copying

Fix order if LICENSE_COMB and LICENSE in ffmpeg ports

Reorder ffmpeg licensing knobs

Make manpages independent of DOCS option
Remove conflict with ffmpeg-devel

Update multimedia/x264 to 0.125.2201
Switch to new options framework

libogg.so.8: Bump PORTREVISION for ports that depend on libogg,
directly or indirectly (via libvorbis, libtheora).

Update ffmpeg to use new options framework

Fix build without /usr/bin/perl symlink [1]
Fix build if rtmpdump is linked against OpenSSL from ports [2]
Do not build documentation if NOPORTDOCS is set

PR:     ports/163055 [1], ports/167516 [2]

Update to 0.7.13

- update png to 1.5.10

Fix support for X11 grabbing

PR:             ports/168120
Reported by:    Baptiste Daroussin <bapt@freebsd.org>

Update to 0.7.12

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

Fix build by chasing libvpx bump.

- Bump PORTREVISION to chase the update of multimedia/libvpx

Update multimedia/schroedinger to 1.0.11

Update lame to 3.99.3.
Bump portrevision of all ports which depend upon it.

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

Update to 0.7.11

Update x264 to 0.119.2113

Update to 0.7.8

Feature safe:   yes

Update to 0.7.7

Update to 0.7.6

Update to 0.7.5

- Bump PORTREVISION of dependent ports due to multimedia/libvpx update

Update to 0.7.4

Update to 0.7.3

Update to 0.7.2

Add missing OpenCV patch

PR:             ports/158510

Reintroduce OPENCV and FREI0R options and enable by default
Remove SSSE3 and CPUDETECT options (now always on)

PR:     ports/149889, ports/156803, ports/158289, ports/158331

Add patch to fix building C++ programs

For now, disable frei0r support because of cyclic dependencies

Fix plist if defined WITHOUT_FFSERVER

Reported by:    Stas Verberkt <legolas_at_legolasweb_dot_nl>

Add missing patch

Change descriptions of several OPTIONS
Reorganize several knobs

Update ffmpeg to 0.7.1
Add support for celt, freetype2, frei0r, rtmp, vo-aacenc, vo-amrwbenc

Update to 0.115.2000

Update libvpx to 0.9.6
Bump PORTREVISION of depending ports

PR:             ports/155522
Approved by:    maintainer (timeout)

Update to 0.6.3