security/tinc: use ${PREFIX}/share/man

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

security: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Kapranoff <kappa@rambler-co.ru>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kriventsov <avk@vl.ru>
  *  Alexander Leidinger <netchild@FreeBSD.org>

security/tinc: fix typos in pkg-descr.

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

- cleanup rc.d script

- fix "service tincd status" for multiple instances
PR:		245095
Submitted by:	errit@weinberg2.de

- update to 1.0.36

Implement new virtual category: net-vpn for VPN related ports

based on discussion at ports@ [1]. As VPN softwares are put in different
physical category net and security. This is a little bit confusing. Let's
give them new virtual category net-vpn.

[1] https://lists.freebsd.org/pipermail/freebsd-ports/2019-April/115915.html

PR:		239395
Submitted by:	myself
Approved by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D21174

- fix restart when shutdown is slow
PR:		228357
Reported by:	CUI Hao

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

- Security update to 1.0.35
Reported by:	Martin Fischer
MFH:	2018Q4
Security: https://security-tracker.debian.org/tracker/CVE-2018-16738
Security: https://security-tracker.debian.org/tracker/CVE-2018-16758
Security: CVE-2018-16738
Security: CVE-2018-16758

- update to 1.0.34

- fix content of manpages
PR:		226917

- update to 1.0.33

- update to 1.0.32

- remove nojail keyword from rc.d script
Submitted by:	Tobias Kilb

- update tinc to 1.0.31

- update to 1.0.29

- update to 1.0.28
- extend MASTER_SITES
PR:		209347
Submitted by:	Sergey Kozlov

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- fix startup order conflict
- allow tinc to start early, so "static_routes" in /etc/rc.conf works.
PR:		202371

- add comments
PR:		206209
Submitted by:	Boris Samorodov

- make portlint happier

- add support for tincd_flags= in rc.conf
PR:		202750

- ensure demon starts after ldconfig
Submitted by:	(email)

- update to 1.0.26

- update to 1.0.25
PR:		200116
Submitted by:	Bas Vermin

- Add CPE info

Approved by:	portmgr blanket

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories P-S.

CR:		D422
Approved by:	portmgr (bapt)

Allow to build with texinfo from ports

With hat:	portmgr

- update to 1.0.24

- update to 1.0.23
Reported by:	Benjamin Podszun

- convert LIB_DEPENDS

- use STAGEDIR

- fix misplaced NO_STAGE in slaveports and ifdefs

Add NO_STAGE all over the place in preparation for the staging support (cat:
security)

- update to 1.0.22

- Security update to 1.0.21
Security: CVE-2013-1428

- update to 1.0.20

- cleanup header
- strip shlibversion in depedency

- fix comment
PR:		171006
Submitted by:	Nick Hibma

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

- update to 1.0.19

- update to 1.0.18

- escape shell names

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

-  use /etc/rc.d/ipfilter quietresync
PR:             163959
Submitted by:   Nick Hibma

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- update to 1.0.16

- update to 1.0.15
- remove duplicate LDFLAGS
PR:             158292
Submitted by:   Jin-Sih Lin

- update to 1.0.14

- update tinc to build with lzo2

- LICENSE GPLv3

- update to 1.0.13

- update to 1.0.12

- update to 1.0.11

- update to 1.0.10
- get rid of getttext

- add LICENSE:

- Update to 1.0.9

- fix reload and restart targets
Submitted by:i  igor <soft[at]antrax-energo.msk.ru>

- add tincd startup script
Submitted by:   igor <soft[at]antrax-energo.msk.ru>

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- take maintainership

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 1.0.8

PR:             113747
Submitted by:   Nils Vogels <nivo+kw+ports.bfa274@is-root.com>

- Update to 1.0.7

PR:             108871
Submitted by:   Martin Matuska <martin@matuska.org>

Remove USE_REINPLACE from all categories starting with S

- Add SHA256

Drop maintainership, since I'm buried in the $REALLIFE stuff.

- Backout latest commit, it needs a repocopy due to API change.

Noticed by:     Matthias Andree <matthias.andree@gmx.de>

- Bump lzo lib version.
- Bump PORTREVISION.

Update to 1.0.4

Fix WWW: line.

Update to 1.0.3

Support WITHOUT_NLS

Fix pidfile location

PR:             ports/68740
Submitted by:   anholt

- Fix MASTER_SITES

PR:             ports/67201
Submitted by:   Roman Neuhauser <neuhauser@chello.cz>

- Remove USE_SIZE knob

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

- SIZEify

Now gettext 0.12.1 is gettext-old.

- Use LDFLAGS

- Update to version 1.0.2

- Fix extra " from last commit.
pointy hat to me ... commited wrong work dir

- don't clobber any given LDFLAGS
  resolves conflitcs with bsd.openssl.mk
Approved by:    krion

- Use LIBS in CONFIGURE_ENV

Reported by:    kris via bento

- Update to 1.0.1
- Take maintainership

In OpenSSL 0.9.7, `OpenSSL_add_all_algorithms' is now a macro.  This
causes configure scripts that look for this function in libcrypto to
lose.  Use `OpenSSL_add_all_ciphers' instead (which is a function in
both OpenSSL 0.9.6 and 0.9.7).

De-pkg-comment.

build with only 1 info file

PR:             42906
Submitted by:   Ports Fury

upgrade to 1.0p8

add tinc 1.0p7
A Virtual Private Network (VPN) daemon