01:08 acm 

- New port: archivers/gambas2-gb-compress-zlib

The gambas zlib compression component

01:07 acm 

- New port: archivers/gambas2-gb-compress-bzlib2

The gambas bzlib2 compression component

15:25 bsam 

Here are new Linux Fedora 8 infrastructure ports.

The recommended version of FreeBSD to use them is 8-CURRENT.
FreeBSD-7.x is not fully compatible with compat.linux.osrelease
2.6.16. Some syscalls cannot be MFCed due to native FreeBSD
ABI breakage.

Usage (and package building):
1. define compat.linux.osrelease=2.6.16;
2. add following variables to /etc/make.conf:
   . OVERRIDE_LINUX_BASE_PORT=f8;
   . OVERRIDE_LINUX_NONBASE_PORTS=f8.

Approved by:    bsam (me) ;-)

14:43 garga 

CamlBZ2 provides OCaml bindings for libbz2 (AKA bzip2), a popular compression
library which typically compresses better (i.e., smaller resulting files) than
gzip.

Using CamlBZ2 you can read and write compressed "files", where files can be
anything offering an in_channel/out_channel abstraction (files, sockets, ...).

Also, with CamlBZ2 you can compress and decompress strings in memory using the
bzip2 compression algorithm.

Author: Olivier Andreu <oandrieu@gmail.com> and
        Stefano Zacchiroli <zack@upsilon.cc>
WWW:    http://camlbz2.forge.ocamlcore.org

PR:             ports/132059
Submitted by:   Jaap Boender <jaapb at kerguelen.org>

20:09 miwi 

Python module implementing LZMA Utils' liblzma API

PylibLZMA provides a python interface for the liblzma
library to read and write data that has been compressed
or can be decompressed by Lasse Collin's LZMA Utils.

WWW: http://launchpad.net/pyliblzma

PR:             ports/129560
Submitted by:   David Naylor <dragonsa at highveldmail.co.za>

20:21 gabor 

A multi-threaded bzip2/bunzip2 filter that doesn't depend on the lseek()
system call and so isn't restricted to regular files.

WWW: http://phptest11.atw.hu/

00:38 lioux 

New port kzip version 20070805: PKZIP-compatible compressor focusing
on space over speed.

00:36 lioux 

New port zipmix version 20070221: Produce a .ZIP file from 2 other
ones with the best compressed files from each.

03:50 knu 

Add ruby-libarchive, Ruby bindings for libarchive.

03:40 knu 

I should have added a non-gem version of this library..

03:05 knu 

Add rubygem-libarchive, Ruby bindings for libarchive.

23:48 miwi 

- Connect archivers/lzmautils-devel

11:28 pgj 

The zip-archive library provides functions for creating, modifying, and
extracting files from zip archives.

WWW: http://johnmacfarlane.net/zip-archive/

PR:             ports/129679
Submitted by:   pgj
Approved by:    miwi

08:50 ale 

Add php5 zip extension.

21:24 wxs 

This package provides a pure interface for compressing and decompressing
streams of data represented as lazy ByteStrings. It uses the zlib C
library so it has high performance. It supports the "zlib",  "gzip" and
"raw" compression formats. It provides a convenient high level api suitable
for most tasks and for the few cases where more control is needed it provides
access to the full zlib feature set.

PR:             ports/128552
Submitted by:   Samy Al Bahra <sbahra@kerneled.org>

08:00 miwi 

This package includes a thin wrapper library of LZMA SDK.

WWW:    http://tokyocabinet.sourceforge.net/

12:38 miwi 

The thunar-archive-plugin is a plugin for the Thunar File Manager, which
adds archive operations to the file context menus. Using this plugin you
will be able to extract and create archive files from within Thunar using
a single click.

WWW:    http://foo-projects.org/~benny/projects/thunar-archive-plugin/

PR:             ports/125998
Submitted by:   ports at c0decafe.net <ports at c0decafe.net>

06:48 edwin 

[NEW PORT] archivers/libpar2 Reusable library for manipulating par2 files

        Libpar2 is a library for creating and using PAR2 files to detect
        damage in data files and repair them if necessary. It can be used with
        any kind of file. Par files are especially popular on Usenet.

        Libpar2 is extracted from par2cmdline, and distributed separately.

        WWW: http://parchive.sourceforge.net/

PR:             ports/126578
Submitted by:   Jeff Burchell <toxic@doobie.com>

13:19 edwin 

New port: archivers/rpm5

        New major version of RPM, based upon rpm5.org release.

        Major new features are sqlite, xar and lzma support as
        well as lots of cleanup and better support for FreeBSD.

        See http://rpm5.org/pressrelease.php for more details.

        The new rpm5 port is based on the old rpm4 port, with
        new knobs added for Python and Lua scripting support.

PR:             ports/123022
Submitted by:   Anders F Björklund <afb@rpm5.org>

22:06 erwin 

Add py-librtfcomp , LZRTF compression library.

PR:             ports/124554
Submitted by:   Alexander Logvinov <ports at logvinov.com>

21:48 erwin 

Add librtfcomp 1.1, LZRTF compression library.

PR:             ports/124554
Submitted by:   Alexander Logvinov <ports at logvinov.com>

18:47 delphij 

New port: pigz, Parallel GZip.

PR:             ports/124344
Submitted by:   Gea-Suan Lin <gslin gslin org>

21:47 araujo 

- Repocopy archivers/orange to archivers/liborange.
- Update to 0.3.2.

PR:             ports/124402
Submitted by:   Alexander Logvinov <ports@logvinov.com> (maintainer)

08:35 itetcu 

Fix INDEX build.

Pointyhat to:   araujo@
Submitted by:   cperciva@

20:18 araujo 

- Remove archivers/dynamite, project has been renamed to archivers/libdynamite.

PR:             ports/123941
Submitted by:   Alexander Logvinov <ports@logvinov.com> (maintainer)
Repocopy by:    marcus

20:07 araujo 

- Repocopy from archivers/dynamite to archivers/libdynamite.
- Update to 0.1.1.
- Project has been renamed.

PR:             ports/123941
Submitted by:   Alexander Logvinov <ports@logvinov.com> (maintainer)
Repocopy by:    marcus

00:12 miwi 

The PHP_Archive package allows creation of self-contained cross-platform
PHP libraries or applications, similar to Java jar files.

WWW: http://pear.php.net/package/PHP_Archive/

PR:             ports/123832
Submitted by:   Wen Heping <wenheping at gmail.com>

06:21 kevlo 

Initial import of deco 0.8.1.

Deco is a script able to extract various archive file formats.

15:53 naddy 

Import lzma 4.32.5.

LZMA Utils is an attempt to provide LZMA compression to POSIX-like
systems. The idea is to have a gzip-like command line tool and
zlib-like library, which would make it easy to adapt the new
compression technology to existing applications.

WWW: http://tukaani.org/lzma/

19:32 thierry 

Parity v2 Archive create/verify/recover

tbb version of the par2cmdline tool.

par2cmdline is a program for creating and using PAR2 files to detect
damage in data files and repair them if necessary. It can be used with
any kind of file. Par files are especially popular on Usenet.

WWW: http://chuchusoft.com/par2_tbb/

PR:             ports/120462
Submitted by:   Ganael Laplanche <ganael.laplanche at martymac.com>

14:19 pav 

- Remove expired tkstep80 related ports

10:37 dinoex 

Archive::Tar::Minitar is a pure-Ruby library and command-line utility that
provides the ability to deal with POSIX tar(1) archive files. The
implementation is based heavily on Mauricio Fernández's implementation
in rpa-base, but has been reorganised to promote reuse in other projects.

The library can only handle files and directories at this point.
The command line utility, minitar, can only create archives, extract from
archives, and list archive contents.

WWW: http://rubyforge.org/projects/ruwiki/

23:07 gahr 

Xarchiver is a Desktop Environment independent archiver frontend.
All common archive types are supported. RPM and ISO are handled without
rpm or isodump executables.

PR:             122149
Submitted by:   Andreev Maxim <andreevmaxim@gmail.com>
Approved by:    miwi (mentor)

20:13 alepulver 

Add unrar-iconv: unrar with iconv support (as slave port).

PR:             ports/117290
Submitted by:   Yarodin <yarodin at gmail.com>

22:14 miwi 

PHK is a PHP-oriented package/archive system. Basically, it can be considered
as a PHP-oriented equivalent of the Java jar format. As jar, PHK allows to
distribute and run a library or an application as a single file.

The PHK accelerator transparently makes PHK runtime faster.

WWW: http://pecl.php.net/package/phk/

PR:             ports/119828
Submitted by:   Ditesh Shashikant Gathani <ditesh at gathani.org>

23:11 gabor 

A BSD-licensed replacement of the ar utility.

Written by:     Kai Wang <kaiw@FreeBSD.org>
Sponsored by:   Google Summer of Code 2007

13:21 ale 

The package com.ice.tar implements a tar archive io package.
This package allows you to create, and extract tar archives.
Since the package uses InputStream and OutputStream, it is possible
to combine this package with the java.util.zip package to handle
.tar.gz files.

WWW: http://www.trustice.com/java/tar/

20:44 danfe 

Add HLExtract, command line utility that can load all HLLib supported
packages and extract multiple items from them while maintaining their
directory structure.

WWW: http://nemesis.thewavelength.net/index.php?p=35

06:38 edwin 

[New port] archivers/linux-par2cmdline

        Linux version of par2cmdline. Useful when the native version
        does not work correctly (e.g. when you get a "Main packet
        not found" error).

PR:             ports/112124
Submitted by:   Ganael LAPLANCHE <ganael.laplanche@martymac.com>

12:31 sat 

Add port archivers/ppmd-7z:

Simple command line implementation of PPMD compression algorithm. It
is based on code by Dmitry Shkarin (archivers/ppmd) but reworked by
Igor Pavlov and bundled with 7zip.

WWW: http://www.7-zip.org/sdk.html

09:10 miwi 

The phar extension provides the phar stream wrapper and the Phar
class for manipulating self-contained PHP Archive (phar) files.
The Phar class can be used to create and to extract contents of
phar files as well as iterating over their contents.

PHP Archive files (Phars) are special collections of files that
can be transparently run right out of the file, similar to Java's
jar archive files. Using a phar archive, it is possible to distribute
a complete PHP application in a single file that will run out of the
file without modification or extraction.

WWW: http://pecl.php.net/package/phar/

PR:             ports/115224
Submitted by:   Ditesh Shashikant Gathani <ditesh at gathani.org>

15:23 ehaupt 

Add unmass, a tool to extract game archives such as wad, dar, mea exe's and many
more.

13:41 sat 

Add port archivers/unfoo:

Unfoo is a tiny sh(1) wrapper to simplify decompression of files.
Supported archive types: tar, gzip, bzip2, ace, rar, zip, 7z.

WWW: http://obsoleet.org/code/unfoo/
Author: Graham Forest <vitaminmoo@wza.us>

Based on:       Gentoo Portage

08:48 bsam 

UPX is a free, portable, extendable, high-performance executable
packer for several different executable formats. It achieves an
excellent compression ratio and offers very fast decompression.
Your executables suffer no memory overhead or other drawbacks
because of in-place decompression.

UPX is copyrighted software distributed under the terms of the
GNU General Public License, with special exceptions granting
the free usage for commercial programs as stated in the
UPX License Agreement.

WWW: http://upx.sourceforge.net/

08:46 bsam 

UCL is a portable lossless data compression library written in ANSI C.

UCL implements a number of compression algorithms that achieve an excellent
compression ratio while allowing *very* fast decompression. Decompression
requires no additional memory.

Author: Markus Franz Xaver Johannes Oberhumer
        markus@oberhumer.com

WWW: http://www.oberhumer.com/opensource/ucl/

07:59 clsung 

Add paq 8.l, an archiver with an extremely high compression ratio.

PR:             ports/111391
Submitted by:   bf <bf2006a at yahoo.com>

20:52 tmclaugh 

Remove port: Included with all current python versions in ports tree.

PR:             107263
Submitted by:   Li-Wen Hsu
Approved by:    python@ (alexbl)

14:53 sat 

Add port archivers/grzip:

grzip is a high-performance file compressor based on Burrows-Wheeler
Transform, Schindler Transform, Move-To-Front, and Weighted Frequency
Counting. It uses the Block-Sorting Lossless Data Compression Algorithm,
which has received considerable attention in recent years for both its
simplicity and effectiveness. This implementation has a compression rate
of 2.234 bps on the Calgary Corpus (14 files) without preprocessing
filters.

WWW: http://magicssoft.ru/?folder=projects&page=GRZipII
Author: Ilya Grebnov

14:26 gabor 

AOLserver interface to zlib library

WWW: http://www.crystalballinc.com/vlad/software/

- Martin Matuska
martin@matuska.org

PR:             ports/105781
Submitted by:   Martin Matuska <martin@matuska.org>
Approved by:    erwin (mentor)

07:52 miwi 

This module provides a Perl interface that allows writing bzip2
compressed data to files or buffer.

WWW:     http://search.cpan.org/dist/IO-Compress-Bzip2/

PR:             ports/108039
Submitted by:   Thomas Abthorpe <thomas at goodking.ca>

04:52 clsung 

Add p5-Compress-Raw-Bzip2 2.003, low-Level Interface to bzip2
compression library.

PR:             ports/108023
Submitted by:   Thomas Abthorpe <thomas at goodking.ca>

20:19 stas 

- Add port for ruby-lha, a ruby extension to work with lha-compressed files.

02:08 rafan 

Add tclmkziplib 1.0, GZIP and ZIP support for TCL; dynamicly loadable.

PR:             ports/107519
Submitted by:   martin at matuska.org

18:05 skv 

Add p5-PerlIO-via-Bzip2 0.02, perl extension to provide a PerlIO layer
to bzip2/bunzip2.

16:18 dinoex 

FreeTar for GNUstep

WWW: https://gna.org/projects/freetar/

11:39 demon 

New port: p5-IO=Compress-Zlib.
A Perl5 interface to allow reading and writing of RFC 1950, 1951, 1952
(i.e. gzip) and zip files/buffers.

10:05 miwi 

This module is the base class for all IO::Compress and IO::Uncompress
modules.

WWW: http://search.cpan.org/dist/IO-Compress-Base/

PR:             ports/105297
Submitted by:   Thomas Abthorpe <thomas at goodking.ca>

10:00 miwi 

The Compress::Raw::Zlib module provides a Perl interface to the
zlib compression library.

WWW: http://search.cpan.org/dist/Compress-Raw-Zlib/

PR:             105278
Submitted by:   Thomas Abthorpe <thomas@goodking.ca>

14:13 vd 

Remove expired leaf ports:

2006-10-26 archivers/linux-unace
2006-10-12 audio/gdesklets-cornerxmms
2006-10-12 deskutils/gdesklets-sensor-displayconstraints
2006-10-17 devel/sdl_ldbad
2006-10-27 lang/pdss
2006-10-17 multimedia/slideshow

13:38 clsung 

Add p5-Archive-Any 0.09.3, single interface to deal with file archives.

PR:             ports/102567
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

16:28 acm 

- New port: archivers/kbackup

KBackup is a program that lets you back up any directories or files, whereby it
uses an easy to use directory tree to select the things to back up.

The program was designed to be very simple in its use so that it can be used by
non-computer experts.

The storage format is the well known TAR format, whereby the data is still
stored in compressed format (bzip2 or gzip).

It also includes a german, french, italian, slovak and russian translation for
the user interface and an english, french and german handbook.

WWW:    http://www.kde-apps.org/content/show.php?content=44998

08:47 clsung 

Add p5-POE-Filter-LZO 1.5, a POE filter wrapped around Compress::LZO.

PR:             ports/103098
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

08:45 clsung 

Add p5-POE-Filter-LZF 1.5, a POE filter wrapped around Compress::LZF.

PR:             ports/103096
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

14:18 clsung 

Add p5-Compress-LZO 1.08, interface to the LZO compression library.

PR:             ports/103097
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

10:51 clsung 

Add p5-Compress-LZF 1.65, extremely light-weight Lempel-Ziv-Free
compression.

PR:             ports/103095
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

08:51 itetcu 

This is a kioslave for KDE to handle 7zip files.
Simply, enter 'p7zip:/path_to_file/filename.7z' in konqueror to use this.

Author: Raul Fernandes <rgfbr@yahoo.com.br>
WWW:    http://www.kde-apps.org/content/show.php?content=17829

PR:             ports/101009
Submitted by:   makc <makc at issp.ac.ru>

12:16 dinoex 

Zipper is a tool for extracting and viewing archive files in GNUstep.
PR:             103088
Submitted by:   Gürkan Sengün

12:25 rafan 

Add pecl-lzf 1.4, handles LZF de/compression.

PR:             ports/102964
Submitted by:   chinsan <chinsan.tw at gmail.com>

12:25 rafan 

Add pecl-bz2 1.0, a Bzip2 management extension.

PR:             ports/102963
Submitted by:   chinsan <chinsan.tw at gmail.com>

12:24 rafan 

Add pecl-rar 0.3.1, a PECL extension to create and read rar files.

PR:             ports/102962
Submitted by:   chinsan <chinsan.tw at gmail.com>

07:44 itetcu 

This Objective Caml library provides easy access to compressed files in ZIP
and GZIP format, as well as to Java JAR files.  It provides functions
for reading from and writing to compressed files in these formats.

Author: Xavier Leroy <Xavier.Leroy@inria.fr>
WWW:    http://pauillac.inria.fr/~xleroy/software.html

PR:             ports/101214
Submitted by:   Stanislav Sedov <ssedov at mbsd.msk.ru>

04:59 dinoex 

the autoconfig-version of lha
maintained as seperate project

Suggested by:   Shigekazu Kimura

05:14 clsung 

Add p5-POE-Filter-LZW 1.2, a POE filter wrapped around Compress::LZW.

PR:             ports/100951
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

03:23 clsung 

Add p5-POE-Filter-Bzip2 1.2, a POE filter wrapped around
Compress::Bzip2.

PR:             ports/100953
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

03:21 clsung 

Add p5-POE-Filter-Zlib 1.2, a POE filter wrapped around Compress::Zlib.

PR:             ports/100949
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

03:10 clsung 

Add p5-Compress-LZW 0.01, pure perl implementation of LZW.

PR:             ports/100950
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

14:13 itetcu 

Encap Package Manger

WWW: http://www.encap.org/epkg/

PR:             ports/97210
Submitted by:   Jim Pirzyk <pirzyk@freebsd.org>

15:42 garga 

Add fpc-unzip , free Pascal routines for unzipping zip files.

PR:             ports/98679
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>

22:35 glewis 

. Remove the bsdtar port, its now incorporated in the libarchive port.

17:53 aaron 

Adding port archivers/p5-Archive-Extract, A generic archive extracting
mechanism.

Approved by:    tobez (implicit)

02:08 mezz 

Rename this ports to use the real vendor package name. The advantage of this
is to allow our users' keyword search works and easier for users to file the
Bugzilla report when they use our name of ports. Debian, Gentoo, NetBSD and
other OSs have the correct package name, but not in our ports tree.

My team, FreeBSD GNOME Team, have agreed with it.

As for x11/gcursor, x11/gnome2 and x11/gnome2-lite chase the rename.

PR:             ports/97985
Repocopy by:    marcus

16:28 jylefort 

Add libzip.

libzip is a C library for reading, creating, and modifying zip archives. Files
can be added from data buffers, files, or compressed data copied directly from
other zip archives. Changes made without closing the archive can be reverted.
The API is documented by man pages.

WWW: http://www.nih.at/libzip/

PR:             ports/94710
Submitted by:   Alexander Zhuravlev <zaa@ulstu.ru>

16:55 garga 

The XAR project aims to provide an easily extensible archive format.
Important design decisions include an easily extensible XML table of
contents for random access to archived files, storing the toc at the
beginning of the archive to allow for efficient handling of streamed
archives,  the ability to  handle files of  arbitrarily large sizes,
the ability to choose independent  encodings for individual files in
the archive, the ability to  store checksums for individual files in
both compressed  and uncompressed form, and the ability to query the
table of content's rich meta-data.

WWW: http://www.opendarwin.org/projects/xar/

PR:             ports/92250
Submitted by:   Jeffrey H. Johnson <CPE1704TKS@bellsouth.net>

15:55 danfe 

Add deutex 4.4.0, an advanced WAD composer for games like Doom, Heretic,
Hexen, and Strife.

WWW: http://www.teaser.fr/~amajorel/deutex/

19:24 ale 

Remove pear ports obsolated by devel/pear and switch
dependencies of all the other pear ports.

Discussed with: thierry, antonio@php.net

17:20 pav 

- Rename linux-linunace to linux-unace

Requested by:   Andrew P. <infofarmer@gmail.com> (maintainer)

14:27 pav 

This is the official version of Unace for Linux from ACE Compression Software.
It can deal with more recent ace archives than those supported by the
open-source port of ace (un)archiver.

PR:             ports/88713
Submitted by:   Andrew Pantyukhin <infofarmer@gmail.com>

14:10 pav 

XArchive is a GTK+ front end for command line archiving tools such as tar, rar,
zip, ace, 7zip, arj, and rpm.

It uses external bash shell wrappers to handle the different types of file
formats, so adding support for new archive types can be easily done by writing
a wrapper.

PR:             ports/88760
Submitted by:   Mark Kane <mark@mkproductions.org>

16:37 mnag 

New port

deb2targz is a very small perl script for converting Debian Linux .deb packages
to a .tar.gz. deb2targz does not need any external programs like 'ar' or 'tar'.

PR:             86641
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>
Approved by:    pav (mentor)

19:58 mnag 

Remove devel/libunrar (wrong category)

Notified by:    dinoex

Add new port archivers/libunrar

"Library to work with RAR archivies"

PR:             ports/86508
Submitted by:   Alex Samorukov <samm@os2.kiev.ua>
Approved by:    pav (mentor)

16:32 garga 

Add ppmd 20050811, a fast archiver with a good compression ratio.

PR:             ports/84796
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>

14:32 garga 

Add ecm 1.0, compresses CD images by stripping unnecessary EDC/ECC data.

PR:             ports/84712
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>

06:13 ahze 

Add mar , a simple binary file format for storing arbitrary meta and
user data.

PR:             ports/82453
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>

18:02 ahze 

Add unzoo , a zoo archive extractor.

PR:             ports/82449
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>

12:08 jylefort 

Add gzrecover.

Gzrecover attempts to skip over bad data in a gzip archive. It will try to to
skip over bad data and extract whatever files might be there.

WWW: http://www.urbanophile.com/arenn/hacking/gzrt/

PR:             ports/81840
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>

18:15 danfe 

Add Dzip, file compression utility specializing in Quake demo compression.

WWW: http://speeddemosarchive.com/dzip/

21:46 flz 

- Add lzo2, version 2.00 of archivers/lzo.

PR:             ports/81721
Submitted by:   Ports Fury
Repocopy by:    marcus

05:19 danfe 

Add lcab, Microsoft cabinet (.CAB) file creator.

Inspired by:    NetBSD pkgsrc

19:11 jylefort 

Simple command line version of compression program using LZMA compression
method. This program is taken from LZMA SDK. 7-zip uses the same compression
method, but creates 7Z archives instead of pure LZMA data stream. LZMA can
compress and decompress data streams using standard input/output.

Compression ratio is about 25-30% better than bzip2 and decompression speed
is about two times faster. This makes LZMA good bzip2 replacement for
use in software distribution.

WWW: http://www.7-zip.org/sdk.html

PR:             ports/80554
Submitted by:   Radim Kolar <hsn@netmag.cz>

14:05 pav 

TorrentZip creates byte-for-byte exact zip files on any machine.  This allows
people to join a torrent (after they have converted their zip files) with a
particular set of files, thus preventing them from having to download the
entire set of files again.  Because of the way TorrentZip creates identical
zips, the file hashes will always match those in the original torrent.

PR:             ports/80579
Submitted by:   Scot W. Hetzel <swhetzel@gmail.com>