Libpar2 is a library for manipulating par2 files, extracted from par2cmdline
Libpar2 is a library for creating and using PAR2 files to detect
damage in data files and repair them if necessary. It can be used with
any kind of file. Par files are especially popular on Usenet.
===> The following configuration options are available for libpar2-0.4_6:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Chase a bunch of failures after libsigc++20 update
New libsigc++20 requires c++11 (it exposes c++11) so explicitly use -std=c++11
where needed.
Mark as broken a bunch of ports which are not c++11 compatible
Reduce unnecessary bsd.port.options.mk inclusions by using OPTIONS helpers.
For liborange, reverse the logic, as I'm pretty sure the OPTIONS were being
used to disable the selected options.
Approved by: portmgr (blanket)
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
- Update to 0.3 [1]
- Remove USE_GCC (builds with clang) [1]
- Add LICENSE (GPLv2)
This is a new upstream, the original is dead.
PR: ports/179029
Submitted by: Herbert J. Skuhra <h.skuhra@gmail.com>
Approved by: culot (mentor), maintainer
- Use gcc for now (does not compile with clang)
Upstream seems inactive for about 7 years
PR: ports/178989
Submitted by: wg (myself)
Approved by: culot (mentor)
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
For a number of ports in archives category, trim the header and drop leading
indefinite article from COMMENT line; also fix few noticed styles bugs while
I am here.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.
PR: ports/153292
Submitted by: myself (pgollucci)
Tested by: -exp run by pav
Approved by: portmgr (pav)
- Includes two patches
* a bugfix that closes a memory leak triggered by corrupted PAR2 files.
That fix is included in some linux vendors' libpar2 packages, and is
well-tested.
* The other adds additional functionality: a method to cancel a file
repair in progress. This patch can be disabled through a config
option.
It is enabled by default because the only application in the ports
tree
that links against libpar2 is news/nzbget. Nzbget makes use of this
functionality if it is available.
PR: 146125
Submitted by: Jeff Burchell <toxic@doobie.com> (maintainer)
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
[NEW PORT] archivers/libpar2 Reusable library for manipulating par2 files
Libpar2 is a library for creating and using PAR2 files to detect
damage in data files and repair them if necessary. It can be used with
any kind of file. Par files are especially popular on Usenet.
Libpar2 is extracted from par2cmdline, and distributed separately.
WWW: http://parchive.sourceforge.net/
PR: ports/126578
Submitted by: Jeff Burchell <toxic@doobie.com>
