Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

archivers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Albert Vernon <f3cun3c02@sneakemail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Kuehn <freebsd@nagilum.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Anders Nordby <anders@FreeBSD.org>

archivers/ucl: Update WWW

- Update pkg-descr
- Take maintainership

Remove # $FreeBSD$ from Makefiles.

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

- Clarify LICENSE
- Switch to options helpers

archivers/ucl: Strip files, Add CONFLICTS (libucl)

- Strip installed binaries and libraries
- Add CONFLICTS against libucl
- Add LICENSE_FILE
- pkg-descr: Strip trailing-slash from WWW:

Clean up plist

Reset the 99 ports still listed under sylvio@

Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy.  Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.

Approved by:	portmgr (implicit)

Drop libtool patch and .la library.

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

- Add OPTIONS_DEFINE

USES libtool

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)

For a number of ports in archives category, trim the header and drop leading
indefinite article from COMMENT line; also fix few noticed styles bugs while
I am here.

- Add license

- Get Rid MD5 support

With hat:       portmgr (myself)

Sync to new bsd.autotools.mk

- Update my mail address to FreeBSD

Approved by:    miwi (mentor)

- Pass maintainership to submitter

PR:             138587 138586 138584
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>
Feature safe:   yes

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Clean up port descriptions for unmaintained ports in `archivers' category:
markup and spelling fixes, kill EOL whitespace and extraneous attribution.

- Remove distinfo hashes, which are not used officially

No objection from:      ports@, maintainers
Approved by:            portmgr (pav)

Use libtool port instead of included version to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify (manually done and checked)

Approved by:    krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 1.03

PR:             ports/72471
Submitted by:   Dima Panov <redfox@Fluffy.Khv.RU>

While I'm here:
- Install some additional documentation
- Shorten COMMENT
- Various cleanup

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Fix configure warning

PR:             65668 65669 65670 65671 65672 65673
Submitted by:   Roman Neuhauser <neuhauser at chello dot cz>

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

- Pacify portlint and use misc macros
- remove pkg-plist (fastjar and stuffit)

Add SIZE.

- Update to 1.02

PR:             ports/60653
Submitted by:   Vincent Tantardini <vinc@FreeBSD-fr.org>

Cosmetic fix: use %%DOCSDIR%% macro.
No functionally changes.

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
A part of PR:   57992

Let be hohest: I really don't have a time now to properly maintain all
these great pieces of software, so that let others with more free time
to take over them.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Removed MASTER_SITE_SUNSITE from the master_sites, it doesn't appear
it has ever been there.
Noticed by: portsurvey.

Update to 1.01.

PR:             39197
Prompted by:    Szymon Roczniak <simon@dischaos.com>

Update MASTER_SITES, WWW and autor's e-mail.    

typo clean up police: \s -> \t    

Add ucl 0.92, a data compression library with low memory usage during  
decompression and competitive with zlib compression ratio.