Use QMapShack to plan your next outdoor trip or to visualize and archive all
the GPS recordings of your past exciting adventures. QMapShack is the next
generation of the famous QLandkarte GT application. And of course it's even
better and easier to use.
===> The following configuration options are available for qmapshack-1.21.1_1:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
graphics/proj: Update to 9.1.0
Release notes:
https://proj.org/news.html#id37
Also remove proj-data dependency.
You can use proj to retrieve data or install graphics/proj-data
manually.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
astro: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* ABURAYER Rewsirow <rewsirow@ff.iij4u.or.jp>
* Alexander Leidinger
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrey Zakhvatov
* Anton Berezin <tobez@FreeBSD.org>
* Anton Berezin <tobez@tobez.org>
* Anton Karpov <toxa@toxahost.ru>
* Brion Moss <brion@queeg.com>
* Bruce M Simpson <bms@FreeBSD.org>
* Chris Piazza <cpiazza@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
archivers/quazip: update to 1.2, latest upstream
Release notes are here:
https://github.com/stachenov/quazip/releases/tag/v1.2
There are a handful of internal changes that don't affect us
(allowing QtZip, for instance) or don't show up in our use of
quazip (-lz in pkgconfig file). There's one relevant change
to close() that **might** affect consumers, but then I'd expect
bug reports from the consumers about failures on load/save.
While here, move the libraries needed only for testing to _build.
Bumping PORTREVISION of consumers.
Reported by: portscout
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
Mark ports recursively depending on Python 2.7 for expiration on June 23.
For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.
Submitted by: rene
Reviewed by: portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D28665
graphics/gdal: Set the default options as a workable set
- reinstate r552962 (was reverted in r553000)
- remove pkg-message from qgis and qgis-ltr
- Bump PORTREVSION on all consumers
PR: 224004
Approved by: portmgr
graphics/proj: Update to 7.1.1
- Add a pkg-message explaining how to access or sync datum grids from the CDN
(disabled by default)
- Add curl and tiff dependencies since proj can read datum grids from remote
COG (Cloud Optimized Geotiff)
- Take maintainer'ship (ok wen@)
PR: 245611
Submitted by: wen (first version)
Reviewed by: wen, rhurlin
Approved by: wen
Exp-run by: antoine
astro/qmapshack: UNBREAK and Update version 1.13.0=>1.14.0
- Change MASTER_SITES to GITHUB
- Update WWW in pkg-descr
- Fix USES
- Prevent a crash when not getting info on devices back from dbus (this
happens when an nvme device (nvd*) is installed in the system, bsdisks
doesn't handle these yet). (already reported upstream).
PR: 241647
Submitted by: cmt
MFH: 2019Q4 (runtime fix)
Relnotes: https://github.com/Maproom/qmapshack/releases
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
archivers/quazip: update to 0.8
From the changelog:
* Support for UTF-8 in file names and comments (Denis Zavorotnyy)
* get/setOsCode(), get/setDefaultOsCode()
* Fixed Z_STREAM_END handling in QuaZioDevic
astro/qmapshack: Update version 1.12.3=>1.13.0
- fix libproj detection: Our graphics proj is built with autotools and thus
does not install it's cmake files. Patches provide an alternate method
for finding libproj using pkg-config, see:
https://sourceforge.net/p/qlandkartegt/mailman/message/36639866/
- fix a crash with current Qt when no GPS device is found (which at least for
me is the default case): since the last Qt update, QList aborts on an
assertion when trying to access the first element of an empty list.
PR: 237425
Submitted by: cmt
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative
- There was no obvious reason to split these ports, and it makes
porting simpler; the set of ports using either mostly coincided.
Exp-run by: antoine
PR: 223687
PR: 232751
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
[NEW] astro/qmapshack: Ultimate outdoor aficionado's tool
Use QMapShack to plan your next outdoor trip or to visualize and archive all the
GPS recordings of your past exciting adventures. QMapShack is the next
generation of the famous QLandkarte GT application. And of course it's even
better and easier to use.
WWW: http://bitbucket.org/maproom/qmapshack
