Carla is a fully-featured audio plugin host, with support for many audio drivers
and plugin formats.
Features:
* LADSPA, DSSI, LV2 and VST2, VST3 and AU plugin formats
* SF2/3 and SFZ sound banks
* Internal audio and midi file player
* Automation of plugin parameters via MIDI CC
* Remote control over OSC
* Rack and Patchbay engine modes, plus Single and Multi-Client if using JACK
* Native audio drivers (ALSA, DirectSound, CoreAudio, etc)
and low-latency (ASIO and JACK)
===> The following configuration options are available for Carla-2.6.0.a1.g20260319:
FLUIDSYNTH=on: MIDI playback support via FluidSynth
====> Audio backend: you have to choose at least one of them
JACK=on: JACK audio server support
PULSEAUDIO=off: PulseAudio sound server support
===> Use 'make config' to modify these settings
*/*: Remove qtbuilder and sip from RUN_DEPENDS
devel/py-qtbuilder and devel/py-sip should only be used as a
BUILD_DEPENDS. (e.g. USE_PYQT=qtbuilder:build sip:build)
Usually, these are only used to build the PyQt framework, but a few
other ports need them to build. Ports that have them as a BUILD_DEPENDS
unnecessarily haven't been audited yet.
Sip used to be needed for run, but this hasn't been the case for quite
some time. Runtime is provided by the devel/py-qt[56]-sip ports.
(USE_PYQT=pysip). The main PyQt ports provide this automatically, so
it isn't necessary to add it to individual consumers.
While here:
www/onionshare: Remove PyQt stuff completely. It uses PySide.
With hat: kde@
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
audio/carla: fix build on powerpc64le
Use the portable eel mode instead of dedicated assembly:
gmake[2]: Entering directory
'/wrkdirs/usr/ports/audio/carla/work/Carla-2.5.0/source/modules/ysfx'
Compiling thirdparty/WDL/source/WDL/eel2/nseel-cfunc.c
{standard input}: Assembler messages:
{standard input}:1444: Error: syntax error; found `(', expected `,'
{standard input}:1444: Error: junk at end of line: `(1048576)'
{standard input}:1445: Error: syntax error; found `(', expected `,'
{standard input}:1445: Error: junk at end of line: `(1048576)'
{standard input}:1490: Error: syntax error; found `(', expected `,'
{standard input}:1490: Error: junk at end of line: `(1048576)'
{standard input}:1491: Error: syntax error; found `(', expected `,'
{standard input}:1491: Error: junk at end of line: `(1048576)'
{standard input}:2249: Error: missing operand
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
audio/jack: Update to Jack2: 0.125.0 -> 1.9.16
Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.
PR: 251125
Submitted by: Florian Walpen <dev@submerge.ch> (original version)
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
audio/carla: Fix build of audio/lmms by re-adding USE_LDCONFIG.
Last update removed USE_LDCONFIG based on a bad recommendation from portlint.
Also move CONFLICTS_BUILD to the right place.
PR: 256420
Reported by: rodrigo
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
audio/carla: Update distinfo because GitHub seems to have changed the algorithm
of tarball generation
Related commit: 516880 (many ports were marked BROKEN for potentially the same
reason)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
pyqt: Change install directories for Python flavor support
* PyQt could not be installed for multiple Python versions at
the same time, as there were conflicting files.
This patch creates Python-version versioned directories for
all these, and further installs binaries with a version number.
* Note, there might be some hickups for software that depends on
on of the .so's provided by PyQt5, which might not be found
anymore autmotically, and maybe need some LD-flaggery.
* Update PyQt5 to 5.10.1
* Mark www/py-qt5-webengine broken. It is unforuntately no longer
compatible with the old qt5-webengine-5.9.4 we ship.
PR: 232745
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D8714
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
audio/carla: Update to 1.9.8
Additional changes:
* Added the py-sip dependency (thanks to the user
Goran Mekic <meka@tilda.center> for notifying me)
* Added USES=shebangfix because it is needed now
* Added CONFLICTS_BUILD=rtaudio-* rtmidi-* because it
is bundled with incompatible versions of both packages
and the build picks the preinstalled headers/libs first
* Removed BSD=true per the hint from the upstream author
Submitted by: myself
Approved by: tcberner (mentor)
Differential Revision: D13794
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
New port: audio/carla: Audio LV2 plugin host for Jack and PulseAudio
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D13172