[From the EsounD website:]
[W]hen two or more applications want to play sounds at the same time,
it's on a first-come, first-served basis. Whoever gets to the audio
device first wins. EsounD changes all of that...
The Enlightened Sound Daemon mixes several audio streams for playback by
a single audio device. You can also pre-load samples, and play them back
without having to send all the data for the sound. Network transparency
is also built in, so you can play sounds on one machine, and listen to
them on another.
WWW: http://www.tux.org/~ricdude/EsounD.html
The ESounD daemon (esd) must be started on a per-user basis. This is typically
done by the Session Manager in GNOME. However, if you are not using the
GNOME Desktop, you will need to add something like the following to your
X Windows initialization script:
esd -terminate -nobeeps -as 2
Add USES=alias to several ports
Alias is a new USES tool that allows DragonFly to masquerade as FreeBSD
by setting CFLAGS+= -D__FreeBSD__. For some ports, this fixes the build
without the need for additional patches.
Approved by: portmgr (bapt, blanket)
Update to 0.3.6.
This update supports a number of new codecs.
Remove indiffently argument from COMMENT
Update pkg-descr to supported codec list.
Stageify.
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
The libesd use hardcoded socket-io timeout = 100ms. This is too small for
slow WIFI connections and sound servers on Windows. It has been solved by
the Debian team. Patch was created by Konstantin Khlebnikov. Bump the
PORTREVISION.
PR: ports/171616
Submitted by: Gabor Fischer <Gabor.Fischer@gmx.net>
Obtained from: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637064
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Presenting GNOME 2.24 for FreeBSD.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
(Only the first 15 lines of the commit message are shown above )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
- Respect the esd.conf and add est.conf.default. [1]
- Remove the patch-configure; it's no longer need.
- Make the portlint a happy man.
PR: ports/69175 [1]
Reported by: Torfinn Ingolfsen <tingo@start.no> [1]
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
GNOME has just changed the layout of their FTP site. This resulted in
making all the distfiles unfetachable. Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.
Put back gugetopt dependency taken out by marcus. The reason the dependency
is here is to prevent gettext from rolling its own version of getopt_long
into the binary, thereby slightly improving code sharing.
Prevent /bin/sh from hanging around along with esd just polluting ps(1) output.
This is more a "style" fix than anything else, so that leave PORTREVISION
intact.
SWitch maintainership of core GNOME ports to a small group of committers
(gnome@FreeBSD.org), since this is now definitely too big for just one person.
Fix EsounD daemon and library insecurities noted on BugTraq. Instead of an
0777 chock-full-o-races /tmp/.esd/, use a 0755 ~/.esd/. Also, the
~/.esd/socket of course needs only be 0644.
