*/*: Bump PORTVERSION of libmusicbrainz(5) consumers

..due to shlib change

Reported by:	jhale

*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

audio/opus: bump consumers after update to 1.4

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

audio: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <dmagda+libsamplerate@ee.ryerson.ca>
  *  <trasz@FreeBSD.org>
  *  Adam Weinberger
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aleksander Fafula <alex@bsdguru.org>
  *  Alex Allan <alex@kamaz.org.uk>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Vereeken <Alexander88207@protonmail.com>

audio/goobox: Use 'gnome' dir not 'gnome3'

framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk

- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree

Differential Revision: https://reviews.freebsd.org/D35097

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

Remove # $FreeBSD$ from Makefiles.

Clean up some things

Reported by:	portscan

Update to 3.6.0

Add USES=xorg USES=gl, ports categories a

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'a'.

Update to 3.4.2

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

- Update audio/libmusicbrainz5 to 5.1.0
- Fix a crash in audio/sound-juicer caused by libmusicbrainz5 (fix added
  upstream, but not in this release) [1]
- Bump PORTREVISION on dependent ports

PR:		196959 [1]
Submitted by:	Pete Johanson <peter@peterjohanson.com> [1]

Fix some glib schema issues.

The schemas should be listed in GLIB_SCHEMAS instead of in the plist so the
  glib schema database can be updated on installed/removal of the package.
  This updating is done by the GLIB_SCHEMAS macro.

Make shotwell not run glib-compile-schemas in the stagedir, this has no effect.
Additional this generates the share/glib-2.0/schemas/gschemas.compiled file.
  This file is managed by the glib20 port. And has a changing checksum because
  it recompiled every time a GLIB_SCHEMAS enabled port is installed or removed.

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Fix problems with missing libs when the linker enforces explicit linking
(a* to d* categories)

PR:		192062

Convert x11-toolkits/unique to "USES=libtool pathfix tar:bzip2".
Bump PORTREVISION on all dependent ports. [1]

audio/ario: USES=libtool.
audio/gmpc: USES=libtool.
audio/gnome-media: USES=libtool:keepla tar:bzip2.
audio/xfce4-mixer: USES=libtool tar:bzip2.
graphics/shotwell: Unbreak and USES=tar:xz.
science/gwyddion: USES=libtool tar:bzip2.
sysutils/mate-control-center: USES=libtool.
x11/xfce4-clipman-plugin: USES=libtool tar:bzip2.

Approved by:	portmgr (implicit) [1]

Stagify brasero
Convert to USES=libtool
Chase shlib number change
Clean up a bit chased ports

Stagify.

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio

With hat:	portmgr

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with a)

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

- Update audio/libdiscid to 0.5.2
- Switch to CMake build system
- Trim Makefile headers
- Bump PORTREVISION on dependent ports

Add an explicit dependency on pkgconf

Obtained from:	portmgr (bapt)

Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

-Update to new header
-OPTIONSng
-Remove the shared library version
-portlint

PR:		ports/173788
		ports/173809
		ports/173802
Submitted by:	Chris Petrik <c.petrik.sosa@gmail.com>

- update png to 1.5.10

- Update to 2.2.0.
- Port to audio/libmusicbrainz3 and libdiscid. [1]
- Remove audio/libmusicbrainz dependency.

PR:             ports/165847
Reported by:    Jason E. Hale <bsdkaffee@gmail.com>
Obtained from:  Its git. [1]
Feature safe:   yes

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase libnotify, libproxy and webkit-gtk2 shlib changes, and fix build where
needed.

- Get Rid MD5 support

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Retire gstreamer 0.8.0

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove FreeBSD 4.xism

PR:             111657
Submitted by:   edwin

Fix build with GCC 4.x.

PR:             107141

Track libnotify update

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

- Remove dirrmtry line which had no chance of working

PR:             ports/100821
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>

- Bump PORTREVISION
- Chase increase of devel/libnotify  shlib version.

audio/gnomemedia2 -> audio/gnome-media

Rename this ports to use the real vendor package name. The advantage of this
is to allow our users' keyword search works and easier for users to file the
Bugzilla report when they use our name of ports. Debian, Gentoo, NetBSD and
other OSs have the correct package name, but not in our ports tree.

My team, FreeBSD GNOME Team, have agreed with it.

As for audio/goobox, audio/rhythmbox, audio/sound-juicer, x11/gnome2,
x11/gnome2-lite and x11-toolkits/py-gnome-desktop chase the rename.

PR:             ports/97985
Repocopy by:    marcus

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

- Update gstreamer to 0.10
- Move all old gstreamer 0.8 ports to gstreamer*80 [1]
- Chase all ports with new gstreamer or gstreaemer moves

Repocopied by:  marcus [1]

Mark BROKEN on 4.X.

Reported by:    pointyhat via kris

Add a fogotten OPTIONS, and fix a portlint nit.

* Add libnotify support
* Fix build with libgnotify-0.3.2 [1]

PR:             93610
Submitted by:   Christian Hiris <4711@chello.at>
Obtained from:  Mandriva Linux

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:     krion@
PR:              ports/88711

Add a missing dependency on gnomedocutils.

Reported by:    pointyhat via kris

- Update to 0.9.93

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Update to 0.9.92.

Update to 0.9.91.

Chase the slit of gconf to a seperate port.

Bump PORTREVISION to chase the glib20 shared lib version change.

Update to 0.9.90.

- split multimedia/gstreamer-plugins in to individual ports per
  gstreamer plugin (52 new ports).
- Chase changes to ports that used USE_GNOME=gstreamerplugisn
   to use new USE_GSTREAMER= macro, Bump PORTREVISION's

--

Examples of new USE_GSTREAMER macro:

 USE_GSTREAMER=        dvd lame flac
 .include <bsd.port.mk>

 If you want to use USE_GSTREAMER after <bsd.port.pre.mk>
 you must follow one of the examples listed below

- Update to 0.7.1
- Remove white spaces

Correct a typo to fix the pkg-plist, s/GCONF_SCEMAS/GCONF_SCHEMAS/g. Bump the
PORTREVISION.

Reported by:    pointyhat via kris

Update to 0.6.0

Remove .schemas file from PLIST since it is completely handled
by GCONF_SCHEMAS (this fixes recently reported pkg_delete failures).

Update to 0.5.0

Add goobox 0.4.0, CD player and ripper for GNOME Desktop environment.