| Port details |
- py-sounddevice Play and record sound through OSS in python programs
- 0.5.1 audio
 =2      0.5.0Version of this port present on the latest quarterly branch. - Maintainer: yuri@FreeBSD.org
- Port Added: 2018-02-04 22:33:20
- Last Update: 2024-10-13 21:01:43
- Commit Hash: 993b777
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: MIT
- WWW:
- https://github.com/spatialaudio/python-sounddevice
- Description:
- sounddevice provides bindings for the PortAudio library and a few convenience
functions to play and record NumPy arrays containing audio signals.
It is primarily intended for use in signal analysis software.
PortAudio plays and records sound through the OSS audio interface.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}sounddevice>0:audio/py-sounddevice@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/audio/py-sounddevice/ && make install clean
- To add the package, run one of these commands:
- pkg install audio/py-sounddevice
- pkg install py311-sounddevice
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py311-sounddevice listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-sounddevice
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1728840962
SHA256 (sounddevice-0.5.1.tar.gz) = 09ca991daeda8ce4be9ac91e15a9a81c8f81efa6b695a348c9171ea0c16cb041
SIZE (sounddevice-0.5.1.tar.gz) = 52896
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-cffi>=1.0.0 : devel/py-cffi@py311
- py311-setuptools>=63.1.0 : devel/py-setuptools@py311
- python3.11 : lang/python311
- Test dependencies:
-
- python3.11 : lang/python311
- Runtime dependencies:
-
- py311-cffi>=1.0.0 : devel/py-cffi@py311
- py311-numpy>=1.16,1<1.27,1 : math/py-numpy@py311
- portaudio>0 : audio/portaudio
- py311-setuptools>=63.1.0 : devel/py-setuptools@py311
- python3.11 : lang/python311
- This port is required by:
- for Run
-
- misc/py-aider-chat
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- audio_py-sounddevice
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.5.1
13 Oct 2024 21:01:43
 |
Yuri Victorovich (yuri) |
audio/py-sounddevice: update 0.5.0 → 0.5.1
Reported by: portscout |
0.5.0
19 Aug 2024 19:11:40
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: update 0.4.7 → 0.5.0
Reported by: portscout |
0.4.7
28 May 2024 08:12:13
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: update 0.4.6 → 0.4.7
Reported by: portscout |
0.4.6_1
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.4.6_1
23 Apr 2023 09:09:58
|
Gerald Pfeifer (gerald) |
*: Bump PORTREVISIONs for math/mpc update to 1.3.1 |
0.4.6
12 Mar 2023 09:02:31
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: Update 0.4.5 → 0.4.6
Reported by: portscout |
0.4.5
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.4.5
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.4.5
04 Sep 2022 06:12:10
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: Update 0.4.4 -> 0.4.5
Reported by: portscout |
0.4.4
14 Jan 2022 08:29:37
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: Update 0.4.3 -> 0.4.4
Reported by: portscout |
0.4.3
22 Oct 2021 08:57:00
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: Update 0.4.2 -> 0.4.3
Reported by: portscout |
0.4.2
09 Aug 2021 00:13:46
|
Yuri Victorovich (yuri) |
audio/py-sounddevice: Update 0.4.1 -> 0.4.2
Reported by: portscout |
0.4.1
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
0.4.1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.4.1
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
0.4.1
02 Oct 2020 02:39:50
|
yuri |
audio/py-sounddevice: Update 0.4.0 -> 0.4.1
Reported by: portscout |
0.4.0
05 Sep 2020 06:07:25
|
yuri |
audio/py-sounddevice: Update 0.3.15 -> 0.4.0 |
0.3.15
21 Mar 2020 09:04:51
|
yuri |
audio/py-sounddevice: Update 0.3.14 -> 0.3.15
Reported by: portscout |
0.3.14
09 Oct 2019 04:58:14
|
yuri |
audio/py-sounddevice: Update 0.3.13 -> 0.3.14
Reported by: portscout |
0.3.13_1
26 Jul 2019 20:46:57
|
gerald |
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330 |
0.3.13
01 Mar 2019 01:33:48
|
yuri |
audio/py-sounddevice: Update 0.3.12 -> 0.3.13
Reported by: portscout |
0.3.12_1
12 Dec 2018 01:35:36
|
gerald |
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590 |
0.3.12
03 Sep 2018 05:23:07
|
yuri |
audio/py-sounddevice: Update 0.3.11 -> 0.3.12
Reported by: portscout |
0.3.11
20 Jun 2018 17:05:44
|
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
0.3.11
08 May 2018 16:19:14
|
yuri |
audio/py-sounddevice: Update 0.3.10 -> 0.3.11
Reported by: portscout |
0.3.10_1
10 Mar 2018 17:46:06
|
gerald |
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079). |
0.3.10
04 Feb 2018 22:33:06
|
yuri |
New port: audio/py-sounddevice: Play and record sound through OSS in python
programs
See usage examples here:
http://python-sounddevice.readthedocs.io/en/0.3.10/#usage
Approved by: adamw (mentor)
Differential Revision: https://reviews.freebsd.org/D14199 |
As an Amazon Associate I earn from qualifying purchases.