QMidiArp is an advanced MIDI arpeggiator, programmable step sequencer and LFO.
It can hold any number of arpeggiator, sequencer, or LFO modules running in
parallel.
Arpeggiator modules produce sequences depending on the notes sent to their input
port, which is typically connected to a keyboard or another sequencer.
Step sequencer modules allow you to create simple linear, monophonic and
globally transposable sequences similar to the first analog sequencers.
MIDI LFO modules independently produce MIDI controller data of adjustable
waveform, time resolution, amplitude and duration.
A Global Storage Tool can store different setups and switch between them at a
given time. It allows you to dynamically combine patterns and LFO wave forms.
===> The following configuration options are available for qmidiarp-0.7.5:
LV2=on: Build and install LV2 plugins
NLS=on: Native Language Support
===> Use 'make config' to modify these settings
audio/qmidiarp: fix build on non-x86
The options -msse, -msse2, and -mfpmath=sse only apply to x86 targets.
They are the default on amd64, so only set them on i386.
Approved by: portmgr (build fix blanket)
MFH: 2026Q1
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com>
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
audio/jack: Update to Jack2: 0.125.0 -> 1.9.16
Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.
PR: 251125
Submitted by: Florian Walpen <dev@submerge.ch> (original version)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
QMidiArp is an advanced MIDI arpeggiator, programmable step sequencer and LFO.
It can hold any number of arpeggiator, sequencer, or LFO modules running in
parallel.
Arpeggiator modules produce sequences depending on the notes sent to their input
port, which is typically connected to a keyboard or another sequencer.
Step sequencer modules allow you to create simple linear, monophonic and
globally transposable sequences similar to the first analog sequencers.
MIDI LFO modules independently produce MIDI controller data of adjustable
waveform, time resolution, amplitude and duration.
A Global Storage Tool can store different setups and switch between them at a
given time. It allows you to dynamically combine patterns and LFO wave forms.
WWW: http://qmidiarp.sourceforge.net/
PR: 221327
Submitted by: Yuri Victorovich (maintainer)
Reviewed by: matthew (mentor), mat
Approved by: matthew (mentor)
Differential Revision: https://reviews.freebsd.org/D12033
