audio/qsynth: update 1.0.0 → 1.0.1

Reported by:	portscout

audio/qsynth: update 0.9.91 → 1.0.0

audio/qsynth: update 0.9.90 → 0.9.91

audio/qsynth: update 0.9.13 → 0.9.90

Reported by:	portscout

audio/qsynth: update 0.9.12 → 0.9.13

Reported by:	portscout

audio/qsynth: update 0.9.11 → 0.9.12

Reported by:	portscout

devel/qt6: bump dependent ports

audio/qsynth: Update 0.9.10 → 0.9.11

audio/opus: bump consumers after update to 1.4

audio/qsynth: Update 0.9.9 → 0.9.10

audio/qsynth: Update 0.9.8 -> 0.9.9

audio/qsynth: Update 0.9.7 -> 0.9.8

Reported by:	portscout

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

audio: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <dmagda+libsamplerate@ee.ryerson.ca>
  *  <trasz@FreeBSD.org>
  *  Adam Weinberger
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aleksander Fafula <alex@bsdguru.org>
  *  Alex Allan <alex@kamaz.org.uk>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Vereeken <Alexander88207@protonmail.com>

devel/cmake: Update to 3.23.0

Update to 3.23.0.
Fix pkg-plist: using the default share/man location

Release Notes:
  https://cmake.org/cmake/help/v3.23/release/3.23.html

PR:		262886
Exp-run by:	antoine

audio/qsynth: Take maintainership

The previous maintainer asked me to take maintainership
in PR#263270.

Approved by:	adridg@

audio/qsynth: update to 0.9.7, latest upstream

This "Spring'22 Release" has one item in the release notes:
- Main application icon is now presented in scalable format (SVG).

Build switched to CMake. This update entirely thanks to yuri@.

PR:		263270

audio/fluidsynth: Update to upstream version 2.2.4

MFH:		2021Q4

audio/fluidsynth: Update to upstream version 2.2.3

MFH:		2021Q4

Remove # $FreeBSD$ from Makefiles.

Update audio/qsynth to latest upstream release and adopt it

Reset MAINTAINER

audio/qsynth: Update to 0.6.3

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Update to 0.6.2

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Update to 0.6.1

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Update to 0.6.0

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

Chase update to audio/fluidsynth; bump PORTREVISION of dependent ports

PR:		240890

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

audio/qsynth: Update to 0.5.7

- Pet portclippy while here

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Update to 0.5.6

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Update to 0.5.5

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Cosmetic changes

Chase update of fluidsynth to 2.0.3

PR:		233448

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

audio/qsynth: Update to 0.5.4

- Drop USE_GL=gl; QSynth only indirectly depends on it via Qt 5

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth needs a compiler with C++11 support

audio/qsynth: Update to 0.5.3

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

audio/qsynth: Update to 0.5.2

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

audio/qsynth: Update to 0.5.1

- Use the upstream release tarballs with a pregenerated configure, etc.
- Drop the seemingly unnecessary post-configure which was added in
  r308039 but with no reason given for it in the associated PR or
  log
- Update --help output to mention the sndio drivers too
- Patch audio driver list in the man pages too
- Follow WWW redirect
- Take maintainership

Changes:	https://qsynth.sourceforge.io/qsynth-downloads.html

Bump PORTREVISIONS to chase update to audio/fluidsynth 1.1.11

PR:		228265

update to version 0.5.0

Submitted by:	Le Baron d'Merde <lbdm@privacychain.ch>
Differential Revision:	https://reviews.FreeBSD.org/D13876

* Updated to 0.4.4
* Removed QT4 option, obsoleted
* Added XUNIQUE option, to match configure
* Moved patch to post-patch target

PR:		221456
Submitted by:	Yuri Victorovich
Reviewed by:	matthew (mentor)
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D12095

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

Update to 0.4.1.

PR:		208610
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Update to upstream version 0.4.0

PR:		203796
Submitted by:	tkato432@yahoo.com

- Update to 0.3.9
- Add option to compile against Qt5

PR:		199219
Submitted by:	tkato432 atyahoo.com

- Switch to linguisttools_build

Cleanup plist

- Update from 0.3.7 to 0.3.8
- Use options helpers properly

PR:		ports/185505
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>

Stage support

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio

With hat:	portmgr

- Get rid of QMAKEFLAGS
- Use options helpers
- Use globally provided LRELEASE/LUPDATE
- Convert LIB_DEPENDS to new style

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with a)

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Update to 0.3.7

PR:		178028
Submitted by:	Ports Fury

Style: tab -> space.

Most contributors copy an existing port when writing their own so reduce the
number of bad examples in the tree.

- Update to version 0.3.6

PR:           ports/171967
Submitted by: KATO Tsuguru <tkato432 _at_ yahoo.com>
Approved by:  beat (mentor)
Feature safe: yes

- Reassign to the heap at maintainer's request

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

- update png to 1.5.10

- Update to 1.5.1

PR:             161631
Submitted by:   Ports Fury
Feature safe:   yes

- Get Rid MD5 support

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Update to 0.3.4, change default MIDI input from ALSA to JACK.

PR:             ports/138242
Submitted by:   trasz@
Approved by:    maintainer

- Chase audio/fluidsynth shlib bump

- Mark MAKE_JOBS_UNSAFE

Reported by:    pointyhat

- Switch SourceForge ports to the new File Release System: categories starting
with A

Remove qt4 build tools from run dependencies.

Approved by:    maintainer

- Fix build after qt 4.4.1 update

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.3.2

PR:             ports/118982
Submitted by:   Dmitry Klimov <lazyklimm at gmail.com> (maintainer)

Qsynth is a fluidsynth GUI front-end application written in C++ around the Qt4
toolkit using Qt Designer. Eventually it may evolve into a softsynth management
application allowing the user to control and manage a variety of command line
softsynth but for the moment it wraps the excellent FluidSynth.

WWW:    http://qsynth.sourceforge.net/

PR:             ports/118215
Submitted by:   Dmitry Klimov <lazyklimm@gmail.com>