KDE3 and QT3 expired on 2013-07-01, remove these ports.
Unfortunately, this also affects some ports using QT3 as a GUI toolkit.

Changes to infrastructure files:
- bsd.kde.mk : obsolete, remove
- bsd.qt.mk : note that a CONFLICTS_BUILD line can probably go after a while
- CHANGES : document the removals from bsd.port.mk
- KNOBS : remove KDE and QT (KDE4 and QT4 should be used instead)
- MOVED : add the removed ports

PR:		ports/180745
Submitted by:	rene
Approved by:	portmgr (bapt)
Exp-run by:	bapt

Style: tab -> space.

Most contributors copy an existing port when writing their own so reduce the
number of bad examples in the tree.

- Deprecate QT3, KDE3 and unmaintained ports depending on them. QT 3.3.8
  was released in 2007 and KDE 3.5.10 in 2008 and both are no longer
  maintained upstream nor in our tree.
- Set EXPIRATION_DATE to 2013-07-01

Discussed with:	bapt, tabthorpe

libogg.so.8: Bump PORTREVISION for ports that depend on libogg,
directly or indirectly (via libvorbis, libtheora).

- update png to 1.5.10

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Bump PORTREVISION for ports that depend on libogg, directly or indirectly
(via libvorbis, libtheora).

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.

- Chase taglib update

Approved by:    miwi (mentor)
Exp-run by:     miwi

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Bump PORTREVISION after libogg and libvorbisfile major version increment.

- Chase taglib bump

A few typo fixes for ports/audio descriptions.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Chase devel/sdl12 shlib version bump

- Chase increase of audio/libvorbis shlib version.
- Bump PORTREVISION

- Update to 3.2 [1]
- Unbreak with GCC 4.x [2]

PR:             ports/114410 [1]
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com> [1]
Tested by:      miwi [2]

Mark BROKEN on FreeBSD 7.X: does not compile with GCC 4.2

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include astro/ audio/ biology/ chinese/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

- Add some SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Bump PORTREVISION to chase the glib20 shared lib version change.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

- Remove post-install: completely, it's being done by the software anyway.

Submitted by:   Kay Lehmann <kay_lehmann@web.de>

- Flip ln -sf arguments, they were in wrong order

PR:             ports/65121
Reported by:    Kay Lehmann <kay_lehmann@web.de>

SIZEify.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Drop maintainership

PR:             63448
Submitted by:   Jan Jungnickel <me@jungnickel.com> (maintainer)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Remove leading slash that crept into the plist.

Submitted by:    Kent Stewart <kstewart@owt.com>

Update to 3.1.  This release seems to behave more friendly on my machine
than the previous version.

Approved by:    maintainer timeout

chase lib version change of multimedia/xmms

PR:             ports/56505
Submitted by:   Espen Skoglund <esk@ira.uka.de>

Remove the USE_GNOMENG macro.

Plist cleanup.

No response from:       maintainer

De-pkg-comment.

After repo copy from graphics category, update all appropriate
dependency references from both audio and graphics to multimedia
category.

audio/xmms                      -->     multimedia/xmms
graphics/avifile                -->     multimedia/avifile
graphics/divx4linux             -->     multimedia/divx4linux
graphics/ffmpeg                 -->     multimedia/ffmpeg
graphics/libdv                  -->     multimedia/libdv
graphics/libdvdcss              -->     multimedia/libdvdcss
graphics/libdvdread             -->     multimedia/libdvdread
graphics/libmpeg2               -->     multimedia/libmpeg2
graphics/linux-realplayer       -->     multimedia/linux-realplayer
graphics/mjpegtools             -->     multimedia/mjpegtools
graphics/mplayer                -->     multimedia/mplayer
graphics/mplayer-fonts          -->     multimedia/mplayer-fonts
graphics/openquicktime          -->     multimedia/openquicktime
graphics/win32-codecs           -->     multimedia/win32-codecs

Repo copied by:         joe (cvs hat)
Approved by:            knu (portmgr hat)

Fix comment/description to say KDE3, not KDE2.

Update to kde3. It still has a bad dependency installed on libmikmod when
it isn't even installed, but that's minor.

Chase xmms shared library version bump.    

Add missing pkg-plist entries    

Chase increased version number of libxmms.    

Add xmms-kde, which integrates XMMS into the KDE2 Panel.