Port details |
- cascade Simple tool to analyze noise and distortion of a RF system
- 1.4_1 cad =2 1.4_1Version of this port present on the latest quarterly branch.
- Maintainer: hrs@FreeBSD.org
- Port Added: 2002-11-13 19:15:03
- Last Update: 2024-01-12 15:11:29
- Commit Hash: d432922
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- License: not specified in port
- WWW:
- https://rfcascade.sourceforge.net/
- Description:
- Cascade is a program for analyzing the noise and distortion performance
of a cascade of elements in an electronic system. A typical application
of cascade is the analysis of a receiver. A text description of the
receiver block diagram consisting of things like amplifiers, mixers,
and filters is entered into cascade. Each element is characterized
by its gain and optionally noise figure, and third order intercept
point. The program then analyzes the system and produces a report
detailing the performance at each stage.
A summary is produced which shows the relative contributions to the
total system performance of each block. This allows easy identification
of what limits system performance.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- Conflicts:
- CONFLICTS_INSTALL:
- To install the port:
- cd /usr/ports/cad/cascade/ && make install clean
- To add the package, run one of these commands:
- pkg install cad/cascade
- pkg install cascade
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: cascade
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (cascade-1.4.tar.gz) = 0bcf3e806632c1bab9b7f08fc2f15dedd37d4ede2b898f7b7e826a6fcf28ed9c
SIZE (cascade-1.4.tar.gz) = 32106
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- groff : textproc/groff
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for cascade-1.4_1:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
- Options name:
- cad_cascade
- USES:
- groff
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
1.4_1 12 Jan 2024 15:11:29 |
Baptiste Daroussin (bapt) |
MANPREFIX: eliminate its usage
While here move manpages to share/man |
1.4 06 Nov 2023 10:03:47 |
Rodrigo Osorio (rodrigo) |
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888 |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.4 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
1.4 20 Jul 2022 14:20:58 |
Tobias C. Berner (tcberner) |
cad: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Anders Andersson <anders@hack.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Christoph Moench-Tegeder <cmt@FreeBSD.org>
* David Yeske <dyeske@gmail.com>
* Diane Bruce <db@db.net>
* Joachim Strombergson <watchman@ludd.ltu.se>
* Johnny Sorocil <jsorocil@gmail.com>
* Julian Jenkins <kaveman@magna.com.au>
* Marc Fonvieille <blackend@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
1.4 10 Jan 2022 15:15:39 |
Stefan Eßer (se) |
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above ) |
1.4 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.4 29 May 2017 11:32:14 |
antoine |
Register dependency on groff
PR: 213725 |
1.4 14 May 2015 10:15:09 |
mat |
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight |
1.4 09 Jun 2014 11:21:53 |
olgeni |
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories A-C.
CR: D196
Approved by: portmgr (bapt) |
1.4 21 Feb 2014 13:35:33 |
ehaupt |
Remove trailing whitespaces from category cad |
1.4 16 Feb 2014 11:45:15 |
ehaupt |
Support staging |
1.4 10 Feb 2014 13:54:28 |
ehaupt |
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt) |
1.4 03 Jan 2014 15:53:43 |
adamw |
Convert cad to MDOCS and MEXAMPLES |
1.4 20 Sep 2013 15:58:42 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad) |
1.4 05 Jan 2011 16:31:03 |
hrs |
- Fix style.
- Take maintainership. |
1.4 22 Aug 2009 00:15:15 |
amdmi3 |
- Switch SourceForge ports to the new File Release System: categories starting
with B,C |
1.4 24 Nov 2005 00:22:47 |
pav |
- Add SHA256 |
1.4 10 Oct 2005 05:14:17 |
linimon |
Reset maintainer at his request due to having too limited time right now. |
1.4 18 Mar 2004 18:01:13 |
trevor |
Add size data, approved by maintainers. |
1.4 22 Oct 2003 09:31:46 |
osa |
Cosmetic fix: use %%DOCSDIR%% macro.
No functionally changes.
Submitted by: Oleg Karachevtsev <ok@etrust.ru>
A part of PR: 57992 |
1.4 07 Mar 2003 05:56:59 |
ade |
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti. |
1.4 13 Nov 2002 19:12:13 |
lioux |
New port cascade version 1.4: A simple tool to analyze noise and
distortion of a RF system
Submitted by: blackend |