Update to 3.3.3.0

PR:             ports/182881
Submitted by:   rakuco@

Apply fixes provided by Max

Submitted by:	makc@

Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)

Add GLU to the build dependencies

Add two more dependencies.

Add moc to the dependencies to fix the build.

Readd qcad and upgrade to version 3.2.1

PR:		ports/181199
Submitted by:	Thierry Thomas (thierry@)

KDE3 and QT3 expired on 2013-07-01, remove these ports.
Unfortunately, this also affects some ports using QT3 as a GUI toolkit.

Changes to infrastructure files:
- bsd.kde.mk : obsolete, remove
- bsd.qt.mk : note that a CONFLICTS_BUILD line can probably go after a while
- CHANGES : document the removals from bsd.port.mk
- KNOBS : remove KDE and QT (KDE4 and QT4 should be used instead)
- MOVED : add the removed ports

PR:		ports/180745
Submitted by:	rene
Approved by:	portmgr (bapt)
Exp-run by:	bapt

- update png to 1.5.10

Add localisazion support to the qcad port.

PR:             ports/162048
Submitted by:   Stefan Rumetshofer

- Get Rid MD5 support

Add two patches from Joerg Wunsch:
- Implement autosave feature
- Detect filesystem full condition

Both patches where sent upwards.

Submitted by:   joerg@

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Don't fail if share/qcad can't be removed since it might be used by other ports

Requested by:   mr@

The attached patches achieve the following improvements:

*  cad/qcad itself:
  1. Enable parallel build.
    This is safe, because the vendor's script supports it
    (but only, when one is using distcc).
  2. Remove the special handling for Alpha.
    I guess, this is a historical wart --
    the current version of qcad compiles on my amd64 with
    `-Wall -W' without any warnings. If Alpha bites again,
    the wart can be put back until someone tracks the bug down.

*  cad/qcad-partslib:
  1. Fetch the .tar.gz, rather than .zip variant of the distribution.
    This new file is more than twice smaller.
  2. Remove build-dependency on qcad -- this is useless for a pure-data port
    and only complicates package building and installation
    (a PORTREVISION bump in qcad itself, for example,
    will necessitate rebuilding partslib without any good reason).
  3. Don't create an intermediate extraction under ${WRKSRC}
    for the sole purpose of creating PLIST -- extract from ${DISTFILE} into
    ${DATADIR} directly and use tar's output to create PLIST on the fly.
    This saves a ton of I/O and diskspace during packaging.

Submitted by: Mikhail T. <mi+thun [at] aldan.algebra.com>

Fix the paths to qt assistant and qcad manual that are being encoded
into the qcad binary.

PR:             ports/130747
Submitted by:   Alexey Shuvaev

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Change to ftp:// too.

Remove always-false/true conditions based on OSVERSION 500000

Fix compilation with gcc.42.
Two debugging outputs where commented out as suggested by the author.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Remove QTDIR from CONFIGURE_ENV, it's in there already thanks to framework

Submitted by:   rafan
Tested on:      pointyhat

- change BUILD_DEPENDS: shells/bash2 -> shells/bash;
- drop a spare line at Makefile to pet portlint.

PR:             ports/108631
Submitted by:   bsam

remove USE_REINPLACE for all ports with categories starting with C

exclude library again since it conflicts with qcad-partslib

update to qcad-2.0.5.0-1

Since /usr/X11R6/... seems to be hardcoded in qcad
help first-time-users by using 'USE_X_PREFIX=yes'

PR:             ports/74118
Submitted by:   TAOKA Fumiyoshi <fmysh X iijmio-mail.jp>

upgrade to qcad-2.0.4.0-1

Fix compilation error due to wrong set parenthesis.

PR:             ports/71540 (with fix), ports/71574
Submitted by:   Rainer Goellner <rainer at jabbe.de>
Approved by:    portmgr

Fix compilation with gcc-3.4

Submitted by:   Tilman Linneweh <arved at FreeBSD.org>

- Fix WWW:

PR:             ports/67958
Submitted by:   Pedro F. Giffuni <giffunip@asme.org>

update to version 2.0.3.3-1

correct pkg-plist creation.
do not handle libraries datadir since it is handled by qcad-partslib.

- upgrade to 2.0.3.1
        for changes see: http://www.ribbonsoft.com/qcad_doc_changelog.html
- use bash for buildscript
- make portlint happy
- dynamically create pkg-plist
- install docs and examples

Forced commit to credit Kaarthik Sivakumar <kaarthik@comcast.net> for
submitting diffs and checking a number of other ports for unaccounted for
qmake usage.

Remove qmake from RUN_DEPENDS in x11-toolkits/qt32 and chase ports which
BUILD_DEPEND on qmake now.

try to fix pkg-plist

BROKEN on 5.x: broken pkg-plist

add patch to compile qg_commandwidget.cpp under -stable

Submitted by:   Oliver Lehmann <oliver@FreeBSD.org>

- Upgrade to QCad version 2.0.2.0-1
  See http://www.ribbonsoft.com/qcad_doc_changelog.html for changes
  can save ACAD R12 .DXF Files now
- Finish elimination of PORTREVISION (Many thanks to Tilman Linneweh)
- Add interim patch for compilation
- Change MAINTAINER to my address to faster getting future errlogs

Submitted by:   Tilman Linneweh <arved@FreeBSD.org> (part.)

Fix fetch.

PORTREVISION should not be used in DISTNAME

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Add SIZE.

fix build

Noted By:       kris

Fix build on both, 4 and 5
Fix pkg-plist

update qcad to version 2.0.1.3-1

Fix build/work of qcad:
- minor update to 2.0.1.2
- add dependancy to bash (needed by build process)
- use {SH} instead of hardcoded sh
- delete repo copied but not used cad/qcad2

Approved by:    marcus (re)

Update to QCad 2.0.1.1

Fix build after QT directory structure change.

Troubles noticed by:    kris/bento

De-pkg-comment.

- Fix PLIST
- Always install online help
- Eliminate miscellaneous superfluousness

PR:             45617
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Pass QTDIR explict to qmake

Reported by:    bento,  Michael Collette <metrol@metrol.net>

Remove obsolete patches left over from previous commit

Update to 1.5.4

PR:             43694
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Grab all the qt2/kde2 ports with no maintainer and put them under kde@
maintainership.

upgrade to 1.4.16

PR:             41028
Submitted by:   Ports Fury

PERL -> REINPLACE_CMD

PR:             39273
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

upgrade to 1.4.14

PR:             38708
Submitted by:   Ports Fury

Update to version 1.4.7    

Overhaul QT/KDE support:   - bsd.port.mk update to use bsd.kde.mk for
USE_{QT,KDE}*   - Cleanup corresponding ports for bsd.kde.mk update.   - Fix
bsd.kde.mk: use correct kdelibs dependency, put qt at the bottom,     introduce
QT_NONSTANDARD variable for nonstandard configure setup.   - Update KDE2 to
2.1.1.  Two patches included in x11/kdelibs2 to fix the     proxy authentication
that was broken for 2.1.1.  Remove old patches.   - Potentially fix kdelibs
build for alpha.   - Fix qt-designer 2.3.0 build.   - Ruby stuff left alone
since it looks like black magic to me.  Should     still work w/ compat shims
for older USE_QT[,2] style.  Some others     were also left alone for the same
reason.    

Use '-O0' when compiling on the Alpha to avoid internal compiler errors.    

Update to version 1.4.6    

Add missing @dirrm.    

Update to 1.4.4    

Convert category cad to new layout.  

Unleash all of these ports upon the people.  I no longer have any interest   in
any of them, but will be happy to assign MAINTAINER to others and commit  
updates for them.    

Update to 1.4.1.