Searches without login should now work. You must get asked to click a button.
Port details
freedvNarrow band digital voice
1.7.0_6commsΣ=0 1.7.0_6Version of this port present on the latest quarterly branch.
BROKEN: Fails to build, error: use of undeclared identifier 'freedv_set_dpsk' IGNORE: is marked as broken: Fails to build, error: use of undeclared identifier 'freedv_set_dpsk'
FreeDV is a Digital Voice mode for HF radio. FreeDV allows any SSB radio
to be used for low bit rate digital voice. Speech is compressed down to
700-1600 bit/s then modulated onto a 1.25 kHz wide signal comprised of
16 QPSK carriers which is sent to the Mic input of a SSB radio. The signal
is received by an SSB radio, then demodulated and decoded by FreeDV. FreeDV
700(B) rivals SSB in it's low SNR performance. At high SNRs FreeDV 1600
sounds like FM, with no annoying analog HF radio noise.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
comms/freedv: Update to v1.7.0
Unbreaks port
upstream notes:
Bugfixes:
Resolves issue with waterfall appearing garbled on some systems. (PR #205)
Resolves issue with Restore Defaults restoring previous settings on exit.
(PR #207)
Resolves issue with some sound valid sound devices causing PortAudio errors
during startup checks. (PR #192)
Enhancements:
Removes requirement to restart FreeDV after using Restore Defaults. (PR
#207)
Hides frequency display on main window unless PSK Reporter reporting is
turned on. (PR #207)
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Update to 1.2
Under heavy development see http://freedv.org/tiki-index.php
Fix distinfo (needed TIMESTAMP)
Fix missing dependancy audio/speex
PR: ports/219349
Submitted by: takefu@airport.fm
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
New port: comms/freedv
FreeDV is a Digital Voice mode for HF radio. FreeDV allows any SSB radio
to be used for low bit rate digital voice. Speech is compressed down to
700-1600 bit/s then modulated onto a 1.25 kHz wide signal comprised of
16 QPSK carriers which is sent to the Mic input of a SSB radio. The signal
is received by an SSB radio, then demodulated and decoded by FreeDV. FreeDV
700(B) rivals SSB in it's low SNR performance. At high SNRs FreeDV 1600
sounds like FM, with no annoying analog HF radio noise.
WWW: http://freedv.org/tiki-index.php
