comms/klog: Update to 2.3.4

MANPREFIX: eliminate its usage

While here move manpages to share/man

comms/klog: update to 2.3.3

- Changed handling of locale to accept "C"

Dec 2023 - 2.3.3
- WIP: Started to reduce the possibility of SQLi with the use of prepared
statements.
- Bugfix: Sat QSO edit was not showing the worked SAT (Closes #645)
- Bugfix: After editing a QSO, the restore was not working properly. (Closes
#649)
- Bugfix: In Sat QSO, still not selected band may make the QSO unusable. (Closes
#651)
- Bugfix: All Gridsquares are now listed when Export to ADIF is used. (Closes
#514)
- Bugfix: Selecting a sat with a new band made the bandcombobox unusable. #613
- Bugfix: F1 (online manual link fixed (Closes #627) (TNX ikbenkous)
- Bugfix: 'Usage' does not properly handle arguments, print newlines or return
status codes (Closes #625) (TNX ikbenkous)

- Enhancement: Improved the Frequency entry. (Closes #622) (TNX ikbenkous)
- Enhancement: Use a good discriminator in header guards (Closes #624) (TNX
ikbenkous)

comms/klog: Update to 2.3.2

comms/klog: add missin dependency on testlib

PR:		266950

comms/klog: Update

Update to 2.2.1

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

comms/klog: Update to 2.1

Update klog to 2.1

comms/klog: update to 2.0

KLog 2.0 – Stop the war
Posted on 26 February, 2022 by Jaime

This release is dedicated to show my disagreement to the war in Ukraine.
We need to stop that.

Feb 2022 – 2.0

KLog users: Sorry for the potential drawback but reading the news and what is
just happening, I felt we need to act.

Jan 2022 - 1.8.7
- Bugfix: Removed the hamlib test from the KLog start that was causing big
delays.
- Bugfix: Serial speed was not saved to config file.

comms/klog:  Update to 1.8.7

Jan 2022 - 1.8.7
- Bugfix: Removed the hamlib test from the KLog start that was causing big
delays.
- Bugfix: Serial speed was not saved to config file.
- Bugfix: eQSL Uploads problem solved (Closes #406).
- Bugfix: Connection to the radios were not being done properly (Closes #407)
(Closes #379).
- Bugfix: SplitCheckBox was checked when coming from Setup (Closes #377).
- Bugfix: Entering a QRZ cleared the DX Gridsquare if it was previously entered
(Closes #357).
- Bugfix: Imported QSOs add the default electronic QSL send info if configured.
- Bugfix: DXCC widget shows last Entity status after modifying a QSO (Closes
#412).
- Bugfix: Hamlib is now stopped while editing a QSO (Closes #414).
- Bugfix: Hamlib on serial devices works ok. (Closes #355).
- Bugfix: RST is not changed on mode change when editing. (Closes #423).
- New feature: Added a Manual Mode checkbox to disable quickly hamlib & wsjtx
integration.
- New feature: Added "Save" and "Cancel" button when editing a recorded QSO.
- Update: Developers mailing list address changed to klog@groups.io (Closes
#421).

Reported by:	portscout

comms/klog: Update to 1.8.6

Jan 2022 - 1.8.6

    Bugfix: Net rig & FLRig hamlib connections were not working propertly.
(Closes #339) (TNX W5PNY)
    Bugfix: Some prefixes were not properly detected. (Closes #371) (Closes
#367).
    Bugfix: Serial Hamlib rigs were not properly working. (TNX W5PNY)
    Bugfix: QRZ.com was disabled if user was not subscribed. (TNX EA5WA)
    Bugfix: QRZ.com data was not updated if the boxes were already filled. (TNX
EA5WA)
    Bugfix: Callsigns formet were not always properly checked.
    Improvement: Hamlib 4.4 in binary packages (macOS & Windows) tested also in
Linux.
    Improvement: RTS & DTR are defined to OFF by default in hamlib.
    Improvement:KLog differenciates QRZ.com subcribed users from non subscribed.
(TNX EA5WA)

Reported by:	portscout

*: Clean up some things

- Fix typos
- Remove unreferenced variables
- Sort categories
- Clean up commented PORTREVISION
- Fix broken syntax

Reported by:	portscan

comms/klog: Update to 1.8.5

Fix translations path as well.

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update to 0.9.8.1

August - 0.9.8.1
- Added the Es'hail / QO-100 satellite.
- UI: Satellite list, propagation modes and others are now shown sorted. (TNX
Isabel)
- UI: Added default values to the infoWidget (Continent, Prefix, CQ, ITU...).
(TNX Isabel)
- UI: RX/TX Freq in Satellite tab are also in red/black depending on the
frequency being out/in of ham bands.
- UI: Mode selected is now changing the RST format and default values for some
modes.
- Bugfix: Editing a QSO to remove a comment was not properly working. (TNX
Isabel)
- Bugfix: Worked & Confirmed QSO numbers are now aligned in the Awards tab. (TNX
Isabel)
- Bugfix: KLog.pro is now fixed to compile in Linux. (TNX KB2YSI)
- Bugfix: Improved how the DXMarathon was managed when disabled.
- Bugfix: Improved how DXCC Award was updated after one QSO was added. (TNX
Isabel)
- Fixed a bug in the SQL update database.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update to 0.9.7.2

Add USES=compiler:c++11-lang to fix build on GCC architectures.
Tested on powerpc64 and amd64. pkubaj@anongoth.pl
Add missing USES=gl as detected by poudriere db@

PR:		ports/237139
Submitted by:	pkubaj@anongoth.pl

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Update klog

April - 0.9.3
- Double clicking on DXCC Widget name of the Entity will show the QSO is
providing that status on the Search widget.
- Added DXCC support for Kosovo.
- Bugfix: Default band & mode are now defined as the most used band and mode.
- Bugfix: TX frequency was not saved.
- Bugfix: In the dxcc status widget, some countries were showing the UN flag
unappropriately.
- Bugfix: When updating the CTY file, query errors were shown on
world.readCTYCSV function.
- Bugfix: When editing the QRZ, the cursor position was not properly maintained.
- Bugfix: Fixed the flags of several DXCC entities that were not correctly
shown.
- Bugfix: DXCC Status widget was not listing all the DX entities.
- Bugfix: Modes & Bands where not always properly updated from the Setup.
- Bugfix: Adding new QSO that implies a DXCC or WAZ status already worked
failed.
- Bugfix: Updating the WAZ status was not always possible due to a incorrect DB
query.
- Updated translations: Danish (TNX Joe), Spanish (EA4TV).

- Add missing `_build' suffix to USE_QT5's buildtools and linguisttools
  components and remove second entry of printsupport
- Wrap one overly long command in the installation recipe
- Properly terminate sentence with a dot and merge two paragraphs in the
  port description text: they are closely coupled and extra pause is not
  warranted there, plus first one consisted of just one sentence

Update to latest release

Now uses Qt5

Install translations, set LICENSE, and fix up dependencies

PR:		201719
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>

Update to 0.9.2.1

Update to latest revision.

- Update MAINTAINER: use @FreeBSD.org

Update to 0.9.0.3, minor bugfixes and new features.

Ressurect klog - a simple QSO logger for Amateur radio

KDE3 and QT3 expired on 2013-07-01, remove these ports.
Unfortunately, this also affects some ports using QT3 as a GUI toolkit.

Changes to infrastructure files:
- bsd.kde.mk : obsolete, remove
- bsd.qt.mk : note that a CONFLICTS_BUILD line can probably go after a while
- CHANGES : document the removals from bsd.port.mk
- KNOBS : remove KDE and QT (KDE4 and QT4 should be used instead)
- MOVED : add the removed ports

PR:		ports/180745
Submitted by:	rene
Approved by:	portmgr (bapt)
Exp-run by:	bapt

- update png to 1.5.10

Update autoconf to 2.69 and automake to 1.12

PR:             166836
Tested by:      Multiple -exp runs (pav)

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- As discussed with ITetcu, hamradio@ will pick up hamradio ports.

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.4.2

PR:             118595
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Fix plist
- Pet portlint (INSTALLS_ICONS and DOCSDIR)

PR:             104835
Submitted by:   Thomas Abthorpe <thomas@goodking.ca>

Drop maintaership

- Update to 0.3.3

PR:             ports/102751
Submitted by:   Diane Bruce <db@db.net>
Approved by:    maintainer timeout (az, 1 month)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Remove deprecated USE_REINPLACE
- Remove no longer exist core.inec.ru from MASTER_SITES list - R.I.P

SHA256ify

Approved by:    krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Fix 'all-depends-list' target in cases if dependencies list is
  very long and if some dependencies can't be added into the list.
  [1]

- Fix FAM support.  Make gamin the default FAM system. [2]

- Introduce new 'quicksearch' target to show only port, path and
  info section of the matching ports. [3]

- Introduce new category - rubygems. [4]

- Fix stale dependencies while installing qmail slaveport and
  another port that depends on qmail. [5]

- Add commentary for describes target in bsd.port.mk. [6]

Bump PORTREVISION to chase the glib20 shared library update.

- Change my e-mail

Approved by: sem (mentor)

Update to 0.3.2 (Adds LIB_DEPENDS to comms/hamlib).

Submitted by:   Andrej Zverev <az@inec.ru> (maintainer)
PR:             ports/86631

- Fix wrong maintainer email

Pointy hat to:  barner

- Fix build on >= 5.x
- Pass maintainership to submitter

Submitted by:           Andrej Zverev <az@az.inec.ru>
PR:                     ports/86074
Approved by:            Matt Dawson <matt@mattsnetwork.co.uk>
                        (old maintainer)

Bump PORTREVISION to chase the glib20 shared lib version change.

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

Add Klog, an amateur radio logging program for KDE

PR:             68689
Submitted by:   Matt Dawson <matt@mattsnetwork.co.uk>