4.2.36_7commsΣ=0 4.2.36_7Version of this port present on the latest quarterly branch.upstream: 4.2.51A newer version was found upstream by portscout, first on 2026-05-11.
This is QUISK, a Software Defined Radio (SDR).
- Quisk can control the HiQSDR.
- As a receiver it can use the SDR-IQ by RfSpace as a sample source.
- As a receiver it can use your soundcard as a sample source.
- Quisk can control SoftRock hardware for both receive and transmit.
- As a transmitter it can accept microphone input and send that to your
transmitter for SSB operation. For CW, QUISK can mute the audio and
substitute a side tone.
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove expired ports:
2020-09-15 audio/abraca: Uses deprecated version of python
2020-09-15 audio/ardour5: Uses deprecated version of python
2020-09-15 audio/cplay: Uses deprecated version of python
2020-09-15 audio/cpp-xmms2: Uses deprecated version of python
2020-09-15 audio/p5-xmms2: Uses deprecated version of python
2020-09-15 biology/haplohseq: Uses deprecated version of python
2020-09-15 biology/tophat: Uses deprecated version of python
2020-09-15 chinese/ibus-array: Uses deprecated version of python
2020-09-15 comms/congruity: Uses deprecated version of python
2020-09-15 comms/libbtbb: Uses deprecated version of python
2020-09-15 comms/quisk: Uses deprecated version of python
2020-09-15 databases/mtools-mongodb: Uses deprecated version of python
2020-09-15 databases/mydbf2mysql: Uses deprecated version of python
(Only the first 15 lines of the commit message are shown above )
x11-toolkits/py-wxPython40: GUI toolkit for the Python programming language
py-wxPython40 aka Phoenix is a reborn of wxPython and in particular it allows to
use wxWidgets with Python3.
- Add x11-toolkits/py-wxPython40
- Replace wxPython30 by wxPython40 when python wxWidgets is required
- Fix cad/kicad and cad/kicad-devel to use wxPython40 "Phoenix"
- Update comms/congruity, graphics/py-mayavi from wx 2.8 to 3.0
- While I'm here fix portlint per emulators/playonbsd
- Remove RUN_DEPENDS from USE_WX per graphics/djvusmooth
- Bump portversion
- Fix unicode on x11-toolkits/wxgtk30 and take Maintainer'ship
PR: 241893
Reviewed by: koobs, tcberner
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D21915
Exp-run by: antoine
Fix SDR-IQ Support
Previously, only if the device name started with the literal string
"/dev/ttyUSB" was the device treated as a tty. The new patch uses isatty()
to decide if the device is a tty.
Remove esound support from pulseaudio as audio/esound expired.
Bump PORTREVISIONs of dependent ports.
Build-tested in poudriere on a head-amd64 jail for audio/pulseaudio*
Fix multi-screen size handling, and fix test for wxWidgets
wx was imported in setup just to test if it was installed, then the script
prompted the user to continue. Comment this out.
The screen size was not properly checked. This caused issues on
multi-monitor systems. Fixed.
Reported by: db
Fix unicode for 'C' locale.
wxPython 3.0 uses the current locale when wx is imported to decide on the
default text encoding. When the locale is 'C' this means only US-ASCII is
supported, corrupting the disaply quite badly. As a hack, if the encoding
is US-ASCII, force LC_ALL to en_US.UTF-8 which allows unicode to work.
Reported by: db
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
Add subdirectory for Hermes
-- was already there, just not included in the setup.py file for some reason
PR: 208595
Submitted by: Jeffery Baitis <jeff@baitis.net>
Update to 3.7.4
Major changes since 3.6.22:
- Added support for the HermesLite radio.
- Add repeater offset and CTCSS tone to favourites screen.
- Support for full-screen mode.
Update portaudio to v19/Remove portaudio2 [1]
Chase portaudio change
Add patches from debian for games/cultivation
Add patches from upsteam for audio/rezound
Mark py-fastaudio as broken
Approved by: maintainer
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Update to latest version.
- Adds FreeDV support
- Mouse wheel changes frequency
- Configurable hamlib IP address
- New IMD right-click menu
- Spot can now transmit 0 amplitude carrier for noise testing
Quisk Version 3.6.21 March 2015
===============================
Quisk can now transmit a message from a WAV file. Record your message at
a high level (near clipping) at 48 ksps, 16-bit, one channel (monophonic).
Then enter the file name on the Config/Config screen. Press the "File play"
button to transmit. Quisk will press the PTT button for you, and release it
during pauses. To interrupt playback, press PTT or release FilePlay so you can
answer.
The "Split" button has been replaced with a "Splt" button and a "Rev" button.
The "Splt"
button splits Rx and Tx; and if you click it with the right mouse button instead
of the
left, it also locks the Tx frequency so tuning changes the Rx frequency. The
"Rev"
button reverses the Tx and Rx frequencies. These features were suggested by
Mario, DH5YM.
I added a new parameter mic_agc_level to the config file to control the mic AGC.
Input levels
below mic_agc_level are ignored. The default is 0.1. Increase this (up to 1.0)
to reduce the
AGC range, and reduce it to increase the AGC mic gain boost.
Philip Lee contributed a patch to the PulseAudio code to set the play buffer
size.
Prompted by: portscout
Update to 3.6.19.
From the changelog:
I added device names to PulseAudio. The PulseAudio name "pulse" still refers
to the default device. Otherwise, enter a PulseAudio name such as
"pulse:alsa_input.pci-0000_00_1b.0.analog-stereo".
PulseAudio support enables you to connect to recent versions of wsjt-x.
To turn this off, set show_pulse_audio_devices = False in your config file.
Submitted by: shurd
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
This is QUISK, a Software Defined Radio (SDR).
- Quisk can control the HiQSDR.
- As a receiver it can use the SDR-IQ by RfSpace as a sample source.
- As a receiver it can use your soundcard as a sample source.
- Quisk can control SoftRock hardware for both receive and transmit.
- As a transmitter it can accept microphone input and send that to your
transmitter for SSB operation. For CW, QUISK can mute the audio and
substitute a side tone.
PR: ports/190366
Submitted by: Stephen Hurd <shurd@FreeBSD.org>
Reviewed by: db, skreuzer
Approved by: db, skreuzer (mentors)
Differential Revision: https://phabric.freebsd.org/D301
