WSPR (pronounced "whisper") stands for "Weak Signal Propagation Reporter."
This program is designed for sending and receiving low-power transmissions
to test propagation paths on the MF and HF bands. Users with internet access
can watch results in real time at WSPRnet.
WWW: http://physics.princeton.edu/pulsar/K1JT
===> The following configuration options are available for wspr-4.00.r4198_11:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
wspr is now installed.
wspr now has some experimental code for controlling
rigs using rigctl from hamlib. Check supported_rigs.txt in docs.
Now, go chase some HF dx.
Remove expired ports:
2018-10-01 devel/erlang-protobuffs: upstream deprecated
2018-10-01 comms/wsjt: replace with wsjtx upstream no longer maintained
2018-10-01 comms/wspr: replace with wsjtx upstream no longer maintained
2018-10-01 comms/kvasd: use wsjtx- kvasd is not needed by wsjtx and no longer
maintained
2018-10-01 mail/mutt-lite: For a lite version of mutt build mail/mutt with less
(or zero) options
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Allow these ports to build with PACKAGE_BUILDING_FLAVORS set.
Poudriere in particulr did not properly handle DEPENDS_ARGS which
made these ports not properly install dependencies. That bug
is being addressed along with adding FLAVORS support to it.
With hat: portmgr
MFH: 2017Q2
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
Update portaudio to v19/Remove portaudio2 [1]
Chase portaudio change
Add patches from debian for games/cultivation
Add patches from upsteam for audio/rezound
Mark py-fastaudio as broken
Approved by: maintainer
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
- Unbreak wspr
- While here fix import of zeroes removing obsolete import
added DOS2UNIX to faciltate this change
- Do not re-add #LDFLAGS+= -shared it breaks configure
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Add OPTIONS_DEFINE=DOCS for ports with %%PORTDOCS%% in the plist.
Where possible, correct a few instances where PORTDOCS was being used
to flag stuff in EXAMPLESDIR. For some ports, mostly those owned by
ruby@, PORTDOCS is applied to pretty much everything whether it's
documentation or example.
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
Remove more tags from pkg-descr files fo the form:
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.
- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)
Suggestions and patches from: ache, C. Burns, wen
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- Temporary hack to fix the build for now.
This bug was triggered as a side effect of: "revision 1.34 of Mk/bsd.gcc.mk
date: 2009/09/26 01:02:01; author: gerald; state: Exp; lines: +3 -1
Have CFLAGS and LDFLAGS set an -rpath to the lang/gcc44 library directory "
The actual problem is in f2py from py-numpy which is not recognising
-Wl,rpath=... as a loader option and should be fixed in f2py.
Notified by: erwin, pav (pointyhat)
WSPR (pronounced "whisper") stands for "Weak Signal Propagation Reporter."
This program is designed for sending and receiving low-power transmissions
to test propagation paths on the MF and HF bands. Users with internet access
can watch results in real time at WSPRnet.
WWW: http://physics.princeton.edu/pulsar/K1JT
