Galera wsrep provider library for Galera Cluster for MySQL, an easy-to-use
high-availability solution with high system up-time, no data loss,
and scalability for future growth.
databases/galera: Deprecate
Does not build. Port superseded by databases/galera26
Confirmed by maintainer.
PR: 277224
Reported by: michael.glaus@hostpoint.ch
databases/and_others: Fix rc.d script comment
I found this typo while researching something else. It seems to have
propgated around the tree.
Approved by: blanket
databases/galera{26}: Update pkg-message
And point to the proper URL of the documentation.
PR: 266959266958
Reported by: Sean Champ <lab+bsd@thinkum.space>
Approved by: devel@galeracluster.com (maintainer, implicit)
MFH: 2022Q4
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
(Only the first 15 lines of the commit message are shown above )
databases/galera: unbreak in 13 and 14
Apply the same patch as in databases/galera26 in r566059.
This probably unbreaks other architectures but I can't test them.
PR: 253612
Reported by: brd@
Mark as BROKEN on riscv64:
galerautils/src/gu_int128.h:163:20: error: use of undeclared identifier
'__bswap64_var'
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com build testing
Update to 25.3.31
Changelog:
Codership is pleased to announce the release of Galera Replication library 3.31,
implementing wsrep API version 25.
The library is now available as targeted packages and package repositories
for a number of Linux distributions, including Ubuntu, Debian, CentOS,
RHEL, OpenSUSE and SLES. Obtaining packages using a package repository
removes the need to download individual files and facilitates the deployment
and upgrade of Galera nodes.
This and future releases will be available from https://www.galeracluster.com.
The latest version of Galera for FreeBSD is available in the FreeBSD
(Only the first 15 lines of the commit message are shown above )
The garbd options are semicolon separated key value pairs.
The current rc.d script does not support multiple options(eg.
"gmcast.listen_addr=tcp://0.0.0.0:5567;pc.weight=1")
The variable garb_galera_options need to be quoted in command line.
PR: 236795
Reported by: TAO ZHOU <zhoutao@laocius.org>
Approved by: devel@galeracluster.com (maintainer)
Sponsored by: Netzkommune GmbH
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
databases/galera: fix build with GCC-based architectures
Add USES=compiler:c++11-lang to fix build when base GCC is used.
PR: 237559
Approved by: mentors (implicit approval)
databases/galera: update to 25.3.26
From the ChangeLog:
* Too early GCache page release in GCache page store was fixed.
* A check for duplicate node UUID was added to prevent node to join
the cluster if another node with the same UUID alrady exists
(codership/galera#533).
* Dynamic symbol dispatch was disabled in libgalera_smm.so to allow
using the library with applications which may be built with different
versions of C++ libraries than the Galera library.
* Internal handling of IPv6 address square bracket notation
and scope_id handling was fixed (codership/galera#519, codership/galera#534)
PR: 237343
Submitted by: teemu.ollakka@galeracluster.com
databases/galera: Unbreak with OpenSSL 1.1.1
It compiles and works just fine with OpenSSL 1.1.1.
Submitted by: Benoit Plessis <benoit@plessis.info>
Approved by: devel@galeracluster.com
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
databases/galera: Upgrade from 25.3.20 to 25.3.21
Also fixup the debug build - the setting provided as debug=N translates
to cc -ON. So, for debug build it should be debug=0.
databases/galera: Split compilation from tests run
Previously tests were ran intermixed with compilation commands in
parallel (scons -jN). Running tests in parallel produces some sporadic
failures which would make the compilation fail.
With this change, when compiling ("make" in the ports directory)
"scons -j8 ... tests=0" is used to request compilation only.
To run the tests do "make test" in the ports directory. It will run
"scons ... tests=1" (without -jN) and will only run the tests.
databases/galera: Unbreak on powerpc64 by requesting a newer GCC
Also set PORTVERSION, PORTREVISION and GH_TAGNAME conditionally (?=),
so they can be overriden from the environment (to ease building custom
packages from arbitrary commits on github).
Mark some ports failing on powerpc64. These ports are either new
ports, or had been recently unblocked.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
When there is a do-install target, do not use a post-install target, do
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
Reset ports maintained by horia@racoviceanu.com.
The last change submitted or approved by Horia in Bugzilla dates back to
September 2015. Since then, all commits to his ports were landed by others
after the maintainer timeout period expired (see r383744, r405055, r405057,
r400461 and r414655, for example).
Horia did show interest in coming back after I sent a private email a few
months ago, but since nothing has changed it is better to reassign his ports
back to the heap.
Differential Revision: https://reviews.freebsd.org/D5980
The MAP_NORESERVE flag to mmap() has never been implemented in FreeBSD and
is being removed. No portrev bump needed since the kernel will continue to
accept this flag for old binaries even after support for it in new binaries
is removed.
PR: 193961
Approved by: portmgr (antoine)
databases/galera: change USE_PYTHON to USE_PYTHON_BUILD
Also adjust RUN_DEPENDS and BUILD_DEPENDS and fix LD_LIBRARY_PATH
PR: 190364
Submitted by: maintainer (Horia Racoviceanu)
Galera wsrep provider to Galera Cluster for MySQL, an easy-to-use
high-availability solution with high system up-time, no data loss,
and scalability for future growth.
WWW: http://galeracluster.com
PR: ports/184654
Submitted by: Horia Racoviceanu <horia@racoviceanu.com>
