GNU GNATS is a set of tools for tracking bugs reported by users to a
central site. It allows problem report management and communication
with users through various means, including e-mail, Web and a network
daemon. GNATS stores all the information about problem reports in its
databases, consisting of plain text files and it provides tools for
querying, editing and maintaining these databases.
===> The following configuration options are available for gnats4-4.1.0_25:
DOCS=on: Build and/or install documentation
EMACS=off: Install Emacs Lisp support file
SERVER=on: Install the gnats server too
===> Use 'make config' to modify these settings
Chase major version update of editors/emacs-devel
Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.
Sponsored by: The FreeBSD Foundation
Chase editors/emacs update to 29.4
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish, yasu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45705
Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44492
*/*: Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43615
*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
databases/gnats4: Remove USES=makeinfo
- Distfile ships with info files and no need to regenerate these files
- Pet portclippy
- Utilize OPTIONSNG where applicable
editors/emacs: Update to 29.1
* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
TREESITTER are ON by default. PGTK and WEBP options are excluded
from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
*/*: Replace USE_GCC=any with USE_GCC=yes
USE_GCC=any has been equivalent to USE_GCC=yes in most cases (such
as i386 and amd64 since 12.x and depending on configuration 11.x,
most newer installations on other platforms, and 13.x across the
board).
Since commit 96c17633d90386b5bcf8 Mk/bsd.gcc.mk is treating them as
different spellings of the same, so continue the deorbiting of the
USE_GCC=any form and simply replace it with USE_GCC=yes.
This should not make any functional difference at all.
Discussed with: mat, linimon, pkubaj
editors/emacs: Update to version 27.1
Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
Unmark certain ports as broken on powerpc64 elfv2, after a trybroken run.
(Note that these have not yet been re-tested on elfv1.)
While here, pet portlint (e.g. location of BROKEN_*, and, in one case,
USES).
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Mark ports broken on mips64 that are already broken on powerpc64. In
most cases, the failure mode is the same. Also, mark them broken on
mips when necessary.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Flavorize and modernize Emacs ports
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Stage databases/gnats4 and assign new maintainer
PR: 192881
Submitted by: Chris Hutchinson
I am sure many people wanted to see this port die, but Chris wanted to
save it. Unfortunately his PR only contained about 2% of the work needed
to properly stage it. I had to overhaul it with the changes to numerous
to recount. Some big ticket items: converted to OptionsNG the EMACS and
CLIENT_ONLY knobs (the ability to define the exact EMACS version is lost,
it just takes the default. There are only 2 EMACS versions anyway).
The chown/mode changes where moved from vendor makefile to pkg-plist. I
also leveraged @sample keyword for the two conf files.
Remove NOPORTDOCS and NOPORTEXAMPLES from unstaged ports. Stage a couple while
we're here. Remove any other references to NOPORT*.
Approved by: portmgr (blanket for modernization)
databases/gnats4: Fix build failure on FreeBSD 10
gnats/gnats.h contains its own prototypes of asprintf() and vasprintf()
which conflict with the system ones:
In file included from edit.c:21:
./gnats.h:140:12: error: conflicting types for 'asprintf'
extern int asprintf (char **buf, const char *fmt, ...);
^
/usr/include/stdio.h:396:6: note: previous declaration is here
int asprintf(char **, const char *, ...) __printflike(2, 3);
Just remove the prototypes from gnats.h.
Reported by: miwi@
gnats4 will core dump on a cvsup'd gnats index with default settings.
The following patch will fix this.
A local gnats mirror is often the only way to rip out patches in a
format which is usefull for further PR handling / patching, so it will be
nice if the default database type does match the upstream (gnats-freebsd).
Maybe this trivial fix helps even others to move from gnats to gnats4
PR: ports/159947
Submitted by: ohauer
Approved by: maintainer timeout (vd ; 175 days)
- Fix possibility of "infinite make fork" when "Registering install for ..."
EMACS ports. [1]
- Allow building a port as root using an NFS-mounted /usr/ports if the
server maps root to a UID other than root. [2]
- Make 'BROKEN' and 'IGNORED' ports exit their "make install" with a fail
status rather than success. [3]
- Improve behavior when dealing with versioned dependencies. [4]
- Fix false positives in check-conflicts target. [5]
- Remove obsolete bzip2 code. [6]
(Only the first 15 lines of the commit message are shown above )
