This library contains a single PostgreSQL extension, a semantic version data
type called `semver`. It's an implementation of the version number format
specified by the Semantic Versioning 2.0.0 Specification.
Affects: users of databases/postgresql* and other software using PostgreSQL to run
Author: kbowling@FreeBSD.org
Reason:
The default version of PostgreSQL has been switched from 17 to 18.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 17, your
files are named according to this.
# service postgresql stop
# pkg create postgresql17-server postgresql17-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql17-server-17.9.pkg -C /tmp/pg-upgrade
# tar xf postgresql17-contrib-17.9.pkg -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql17-server databases/postgresql17-contrib databases/postgresql17-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql18-server databases/postgresql18-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql18-server databases/postgresql18-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql18-server databases/postgresql18-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C --no-data-checksums -D /var/db/postgres/data18 -U postgres"
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data17/ -B /usr/local/bin/ -D /var/db/postgres/data18/ -U postgres "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) If you use non-default initdb options, you have to adjust the initdb-command accordingly
2) The initdb in the upgrade procedure uses '--no-data-checksums' to enable
pg_upgrade from before this change. You should review the documentation and
decide whether you want to then enable checksums with pg_checksums. Future
upgrade instructions for PostgreSQL 19 and later will assume a default
initdb, and therefore that checksums are enabled.
Affects: users of databases/postgresql* and other software using PostgreSQL to run
Author: kbowling@FreeBSD.org
Reason:
The default version of PostgreSQL has been switched from 16 to 17.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 16, your
files are named according to this.
# service postgresql stop
# pkg create postgresql16-server postgresql16-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql16-server-16.8.pkg -C /tmp/pg-upgrade
# tar xf postgresql16-contrib-16.8.pkg -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql16-server databases/postgresql16-contrib databases/postgresql16-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql17-server databases/postgresql17-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql17-server databases/postgresql17-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql17-server databases/postgresql17-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data17 -U postgres"
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data16/ -B /usr/local/bin/ -D /var/db/postgres/data17/ -U postgres "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) If you use non-default initdb options, you have to adjust the initdb-command accordingly
2024-07-23
Affects: users of databases/postgresql* and other software using PostgreSQL to run
Author: kbowling@FreeBSD.org
Reason:
The default version of PostgreSQL has been switched from 15 to 16.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 15, your
files are named according to this.
# service postgresql stop
# pkg create postgresql15-server postgresql15-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql15-server-15.7.pkg -C /tmp/pg-upgrade
# tar xf postgresql15-contrib-15.7.pkg -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql15-server databases/postgresql15-contrib databases/postgresql15-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql16-server databases/postgresql16-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql16-server databases/postgresql16-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql16-server databases/postgresql16-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data16 -U postgres"
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data15/ -B /usr/local/bin/ -D /var/db/postgres/data16/ -U postgres "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) If you use non-default initdb options, you have to adjust the initdb-command accordingly
2023-09-08
Affects: users of databases/postgresql* and other software using PostgreSQL to run
Author: kbowling@FreeBSD.org
Reason:
The default version of PostgreSQL has been switched from 13 to 15.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 13, your
files are named according to this.
# service postgresql stop
# pkg create postgresql13-server postgresql13-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql13-server-13.12.pkg -C /tmp/pg-upgrade
# tar xf postgresql13-contrib-13.12.pkg -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql13-server databases/postgresql13-contrib databases/postgresql13-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql15-server databases/postgresql15-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql15-server databases/postgresql15-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql15-server databases/postgresql15-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data15 -U postgres"
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data13/ -B /usr/local/bin/ -D /var/db/postgres/data15/ -U postgres "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) The default user changed from "pgsql" to "postgres" in 11. The migration steps above now assume
the "postgres" database user and FreeBSD user.
2) If you use non-default initdb options, you have to adjust the initdb-command accordingly
2021-10-24
Affects: users of databases/postgresql* and other software using PostgreSQL to run
Author: kbowling@FreeBSD.org
Reason:
The default version of PostgreSQL has been switched from 12 to 13.
The upgrade procedure can use up twice the space the databases
currently needs. If you have a big amount of stored data take a
closer look at the manpage of pg_upgrade for avoidance and/or
speedup of the upgrade.
The upgrade instructions consider a basic usage and do not match
complex scenarios like replication, sharding, or similar.
Upgrade instructions:
First stop your PostgreSQL, create PostgreSQL-binaries and backup your data.
If you have another Version of PostgreSQL installed, for example 12.8, your
files are named according to this.
# service postgresql stop
# pkg create postgresql12-server postgresql12-contrib
# mkdir /tmp/pg-upgrade
# tar xf postgresql12-server-12.8.pkg -C /tmp/pg-upgrade
# tar xf postgresql12-contrib-12.8.pkg -C /tmp/pg-upgrade
# pkg delete -f databases/postgresql12-server databases/postgresql12-contrib databases/postgresql12-client
Now update PostgreSQL:
pkg user:
# pkg install databases/postgresql13-server databases/postgresql13-contrib
# pkg upgrade
Portmaster users:
# portmaster databases/postgresql13-server databases/postgresql13-contrib
# portmaster -a
Portupgrade users:
# portinstall databases/postgresql13-server databases/postgresql13-contrib
# portupgrade -a
After installing the new PostgreSQL version you need to convert
all your databases to new version:
# su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data13 -U postgres"
# su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data12/ -B /usr/local/bin/ -D /var/db/postgres/data13/ -U postgres "
Now the migration is finished. You can start PostgreSQL again with:
# service postgresql start
ATTENTION:
1) The default user changed from "pgsql" to "postgres" in 11. The migration steps above now assume
the "postgres" database user and FreeBSD user.
2) If you use non-default initdb options, you have to adjust the initdb-command accordingly
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
databases/postgresql-semver: Add new port
This library contains a single PostgreSQL extension, a data type
called "semver". It's an implementation of the version number format
specified by the Semantic Versioning 2.0.0 Specification.
PR: 259001
