databases/py-alembic: Update version 1.15.0=>1.15.1

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_15_1

databases/py-alembic: Update version 1.14.1=>1.15.0

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_15_0

databases/py-alembic: Update version 1.14.0=>1.14.1

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_14_1

databases/py-alembic: Update version 1.13.3=>1.14.0

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_14_0

databases/py-alembic: Update version 1.13.2=>1.13.3

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_13_3

databases/py-alembic: Update version 1.13.1=>1.13.2

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_13_2

devel/py-python-dateutil: Move devel/py-dateutil to devel/py-python-dateutil

- Convert to USE_PYTHON=pep517
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, update audio/py-pyradio to use PYTHON_PKGNAMEPREFIX instead of
PKGNAMEPREFIX for *_DEPENDS

databases/py-alembic: Update version 1.13.0=>1.13.1

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_13_1

databases/py-alembic: Update version 1.12.1=>1.13.0

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_13_0

databases/py-alembic: Update version 1.12.0=>1.12.1

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_12_1

databases/py-alembic: Update version 1.11.3=>1.12.0

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_12_0

databases/py-alembic: Update version 1.11.2=>1.11.3

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_11_3

databases/py-alembic: Update version 1.11.1=>1.11.2

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_11_2

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

databases/py-alembic: Update version 1.11.0=>1.11.1

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_11_1

databases/py-alembic: Update version 1.10.4=>1.11.0

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_11_0

databases/py-alembic: Update version 1.10.3=>1.10.4

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_10_4

databases/py-alembic: Update version 1.10.2=>1.10.3

Changelog:
https://github.com/sqlalchemy/alembic/releases/tag/rel_1_10_3

databases/py-alembic: Update version 1.9.4=>1.10.2

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_10_2

databases/py-alembic: Update version 1.9.2=>1.9.4

Changelog: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_9_4

databases/py-alembic: Update version 1.9.1=>1.9.2

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_9_2

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

databases/py-alembic: Update version 1.8.1=>1.9.1

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_9_1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

databases/py-alembic: Update version 1.8.0=>1.8.1

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_8_1

Fix CONFLICTS_INSTALL in the databases category

Approved by:	portmgr (implicit)

databases/py-alembic: Update version 1.7.7=>1.8.0

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_8_0

databases/py-alembic: Update version 1.7.6=>1.7.7

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_7_7

databases/py-alembic: Update version 1.7.5=>1.7.6

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_7_6

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

databases/py-alembic: Update version 1.7.4=>1.7.5

Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_7_5

databases/py-alembic: Update version 1.4.3=>1.7.4

- Add LICENSE_FILE
- Mark USE_PYTHON=concurrent

PR: 257371
Reported by: meka@tilda.center
Relnotes: https://github.com/sqlalchemy/alembic/releases/tag/rel_1_7_4

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

databases/py-alembic: Update version 1.4.2=>1.4.3

- Add TEST framework
- Mark NO_ARCH

Relnotes:	https://alembic.sqlalchemy.org/en/latest/changelog.html

- Update to 1.4.2
- Pass maintainership to bofh

Rquested by:	bofh

- Update to 1.0.11

Update to 1.0.9

- Update to 1.0.8

- Update to 1.0.7

- Update to 1.0.5

- Update to 1.0.1

Change dependency from sqlalchemy10 to sqlalchemy12 because mail/mailman3 needs

PR:		230164
Submitted by:	pi

- Update to 1.0.0

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

- Update to 0.9.9

- Update to 0.9.8

- Add missing RUN_DEPENDS, sort

Submitted by:	arved

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

- Update to 0.9.6

- Update to 0.9.1

- Update to 0.8.10
- Update WWW

- Update to 0.8.9

- Update to 0.8.8
- Change RUN_DEPENDS to py-sqlalchemy10 [1]

PR:		213562 [1]
Submitted by:	Alexander Nusov <alexander.nusov@nfvexpress.com>

- Update to 0.8.7

Reorganise and modernise the py-sqlalchemy ports.

 - Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches.
 - Deprecate the ports for the 0.6 and 0.7 release branches, as these
   have been declared EoL and are no longer supported by upstream.
 - Update to the latest available version in each branch.

In detail:

   Port                 Version Maintainer
   ----------------------------------------------
   py-sqlalchemy06      0.6.9   nivit@FreeBSD.org (Deprecate 2016-08-20) [1]
   py-sqlalchemy07      0.7.10  nivit@FreeBSD.org (renamed py-sqlalchemy,
Deprecate 2016-08-20) [1]
   py-sqlalchemy08      0.8.7   nivit@FreeBSD.org (renamed py-sqlalchemy-devel)
[1]
   py-sqlalchemy09      0.9.10  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]

- Update to 0.8.6

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 0.8.4

- Convert ports from databases/ and deskutils/ to new USES=python

Approved by:	portmgr (implicit)

- Update to 0.6.5
- Drop easy_install

PR:		ports/189750
Submitted by:	Bartek Rutkowski <ports@robakdesign.com>

- Update to 0.6.2

Add py-alembic 0.6.1, database migration tool for SQLAlchemy.