DB Browser for SQLite is a light GUI editor for SQLite databases,
built on top of Qt. The main goal of the project is to allow
non-technical users to create, modify and edit SQLite databases
using a set of wizards and a spreadsheet-like interface.
This project has previous been known as "SQLite Browser" and "Database
Browser for SQLite". "DB Browser for SQLite" will hopefully be the
name that sticks. :)
===> The following configuration options are available for sqlitebrowser-3.13.99:
SQLCIPHER=off: Support encrypted SQLite databases
===> Use 'make config' to modify these settings
*/*: Update my maintainer email to @FreeBSD.org
Update email address from mew14930xvi@inbox.lv to mce@FreeBSD.org.
Reviewed by: osa, fluffy (mentors)
Approved by: osa (mentor)
Differential Revision: https://reviews.freebsd.org/D55874
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
Fix PORTSCOUT=ignore:* uses throughout the tree
PORTSCOUT=ignore:1 is the only valid way syntax according to the
Portscout documentation. In disables the distfile version checks
completely. In order to ignore only certain version instead, it is
necessary to use other Portscout keys like skipv.
Also, remove the setting completely when it attempts to instruct
Portscout to skip versions older than the current one.
Approved by: portmgr blanket
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
This port needs USES=compiler:c++11-lang and #include <strings.h> in
src/grammar/Sqlite3Lexer.hpp to build on GCC-based architectures.
While here, add USES=gnome.
PR: 234206
Submitted by: Piotr Kubaj
Approved by: maintainer
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
The find module for QScintilla included with sqlitebrowser has never worked
(well) on FreeBSD. Then the port used en embedded copy of QScintilla.
Switch to using the system QScintilla.
This change is triggered by CMake 3.11, which tried to build the embedded
QScintilla slightly differently. That fails because there are header
files declaring enum { SCI_CANREDO = 2016 } *and also* header files
that #define SCI_CANREDO 2016; the include order is very fragile.
Also reported upstream.
Reviewed by: lbartoletti_tuxfamily (maintainer)
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D14930
databases/sqlitebrowser: update to 3.10.0; remove sqlitebrowser-qt5
Since QT4 is dropped, sqlitebrowser-qt5 is now sqlitebrowser.
PR: 221699
Submitted by: lbartoletti <lbartoletti@tuxfamily.org> (maintainer)
Add new port databases/sqlitebrowser-qt5 as slaveport of databases/sqlitebrowser
Add a new port databases/sqlitebrowser-qt5 as slaveport of the existing
databases/sqlitebrowser.
PR: 211217
Reviewed by: mat
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D7253
Remove USE_SQLITE from bsd.databases.mk, replaced by USES=sqlite.
While there replace USE_SQLITE=x by USES=sqlite:x.
PR: 208971
Submitted by: mat
Exp-run by: antoine
With hat: portmgr
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D5951
New port: databases/sqlitebrowser
DB Browser for SQLite is a light GUI editor for SQLite databases,
built on top of Qt. The main goal of the project is to allow
non-technical users to create, modify and edit SQLite databases
using a set of wizards and a spreadsheet-like interface.
This project has previous been known as "SQLite Browser" and "Database
Browser for SQLite". "DB Browser for SQLite" will hopefully be the
name that sticks. :)
WWW: http://sqlitebrowser.org/
PR: 196365
Submitted by: coder@tuxfamily.org
