sqliteman is the best developer's and/or admin's GUI tool for
Sqlite3 in the world. No joking here (or just a bit only). It
contains the most complete feature set of all tools available.
And much more, it's available for all major platforms, and
it's free.
WWW: http://sqliteman.yarpen.cz/
Qt4 deprecation: Remove Qt4 and its consumes.
2019-03-15 accessibility/qt4-accessible: Qt4 has been EOL since december 2015
2019-03-15 astro/qlandkartegt: Qt4 has been EOL since december 2015
2019-03-15 astro/stellarium-qt4: Qt4 has been EOL since december 2015
2019-03-15 astro/xglobe: Qt4 has been EOL since december 2015
2019-03-15 audio/acoustid-fingerprinter: Qt4 has been EOL since december 2015
2019-03-15 audio/cueplayer: Qt4 has been EOL since december 2015
2019-03-15 audio/esperanza: Qt4 has been EOL since december 2015
2019-03-15 audio/lastfm-desktop: Qt4 has been EOL since december 2015
2019-03-15 audio/minitunes: Qt4 has been EOL since december 2015
2019-03-15 audio/mixxx20: Qt4 has been EOL since december 2015
2019-03-15 audio/mumble: Qt4 has been EOL since december 2015
2019-03-15 audio/murmur: Qt4 has been EOL since december 2015
2019-03-15 audio/puddletag: Qt4 has been EOL since december 2015
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
Try but fail to fix build on gcc-based archs. The fix is necessary but
not sufficient. It has no effect on clang-based archs.
Approved by: portmgr (tier-2 blanket)
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Update QScintilla 2.10.2.
Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).
Thanks to antoine for the exp-run.
PR: 225928
Remove USE_SQLITE from bsd.databases.mk, replaced by USES=sqlite.
While there replace USE_SQLITE=x by USES=sqlite:x.
PR: 208971
Submitted by: mat
Exp-run by: antoine
With hat: portmgr
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D5951
Update PyQt4 to 4.11.4, SIP to 4.17 and QScintilla2 to 2.9.1.
Bring in some long overdue updates, some of which are required for us to
later land the PyQt5 ports.
One big change with this update is that the PyQt4 ports now install their
.sip files into share/py-sip/PyQt4 instead of share/py-sip. This way we do
not end up with directories like share/py-sip/QtCore, which are especially
confusing once PyQt5 lands and starts installing files with the same names.
Other noteworthy items:
- PORTREVISION has been bumped on ports depending on devel/qscintilla2
because libqscintilla2.so's SOVERSION has changed.
- graphics/seexpr has been converted to USE_PYQT, as the file it used to
define a build-time dependency on x11-toolkits/py-qt4-gui has moved.
Once again, big thanks to Tobias Berner <tcberner@gmail.com> and Guido Falsi
(madpilot@) for their initial work on these ports as part of the effort to
land PyQt5 into the tree (see D2910 in Phabricator for an earlier version of
the PyQt5 patch set).
PR: 205143
Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.
Instead of defining a variable that is almost always based on CONFIGURE_ENV,
just use CONFIGURE_ENV directly.
This also matches the behavior of other ports that do not use autotools (so
most ports can just worry about CONFIGURE_ENV). Additionally, the fact that
we do not use ?= means we do not have problems if another file in Uses/
needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to
USES would matter).
Ports which set CMAKE_ENV have been adjusted accordingly. In most cases,
CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being:
* databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has
no effect on the build system.
* devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already
retrieved from the CMAKE_CXX_COMPILER variable in the build
system.
* graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there
has no effect on the build system.
Reviewed by: makc
Differential Revision: https://reviews.freebsd.org/D3403
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.
... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.
This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:
- General, belated changes:
* Use OPTIONS helpers wherever possible, stop including
<bsd.port.options.mk> when not necessary, stop checking for
${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
add options such as DOCS and/or DEBUG where they were only checked for.
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.
Approved by: portmgr (implicit)
Remove CMAKE_USE_PTHREAD from the ports using it.
This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.
Approved by: avilla (mentor), portmgr (miwi)
Feature safe: yes
sqliteman is the best developer's and/or admin's GUI tool for
Sqlite3 in the world. No joking here (or just a bit only).It
contains the most complette feature set of all tools available.
And much more , it's available for all major platforms, and
it's free.
WWW: http://sqliteman.sf.net/
PR: ports/134733
Submitted by: Wen Heping <wenheping at gmail.com>
