2017-04-30 devel/stormlib-ghost++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/py-coil: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/py-cmdln: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/privman: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/c-unit: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/py-px: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/nglogc: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/bncsutil-ghost++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/liblouisxml: Unfetchable for more than six months (google code
has gone away)
2017-04-30 devel/nxt-python: Unfetchable for more than six months (google code
has gone away)
2017-04-30 devel/spdict: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/guiloader-c++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/streamhtmlparser: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/winpdb: Unfetchable for more than six months (google code has
gone away)
2017-04-30 net/opendpi: Unfetchable for more than six months (google code has
gone away)

Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.

In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed.  The remaining must not
be of use to anyone.

With hat:	portmgr
Sponsored by:	Absolight

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Part 1 of adding USE_GNOME=intltool to ports that require it.

The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.

PR:		201980
Exp-run by:	antoine@

Remove empty directory

Stage support

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in deskutils

Add NO_STAGE all over the place in preparation for the staging support (cat:
deskutils)

Add an explicit dependency on pkgconf

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

- update png to 1.5.10

Update to 0.6

PR:             161607
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with D

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Reset MrL0Lz@gmail.com due to maintainer-timeouts and no response to email.

Hat:    portmgr

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Rename this ports to use the real vendor package name. The advantage of this
is to allow our users' keyword search works and easier for users to file the
Bugzilla report when they use our name of ports. Debian, Gentoo, NetBSD and
other OSs have the correct package name, but not in our ports tree.

My team, FreeBSD GNOME Team, have agreed with it.

As for deskutils/superswitcher, devel/configgen and devel/gnome2-hacker-tools,
chase the rename.

PR:             ports/97985
Repocopy by:    marcus

- Update to 0.3

PR:             96829
Submitted by:   Peter Thoenen <peter.thoenen___yahoo.com>
Approved by:    maintainer timeout (15 days)

Remove USE_REINPLACE from all categories starting with D

New Port: deskutils/superswitcher

      This is a replacement for Alt+Tab in GNOME. The port uses
      REINPLACE_CMD to fix weirdness in detecting x11.pc. This port
      also uses ${INSTALL_DATA} because port does not respect
      --prefix during ./configure.

        A more feature-full replacement of thr Alt-Tab window
        switching behavior.

        Superswitcher uses the "Super" key, also known as the Windows
        key to switch between windows and workspaces.

        WWW: http://www.gnomefiles.com/app.php?soft_id=1231

PR:             ports/91425
Submitted by:   Remington <MrL0Lz@gmail.com>