Chase major version update of editors/emacs-devel

Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.

Sponsored by:	The FreeBSD Foundation

Chase editors/emacs update to 29.4

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish, yasu
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D45705

Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D44492

*/*: Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths

- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D43615

editors/emacs: Update to 29.1

* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
  TREESITTER are ON by default. PGTK and WEBP options are excluded
  from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
  result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
  result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
  via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
  and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

editors/emacs-devel: Update to 2022-11-28 snapshot

Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.

Changes:	https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f

editors/emacs: Update to 28.2

* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
  since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.

ChangeLog:	https://www.gnu.org/software/emacs/news/NEWS.28.2

PR:		266454
Exp-run by:	antoine
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D36613

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

Emacs ports: Bump PORTREVISION after Emacs 28.1

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34781

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

*: Chase new major version (29) of editors/emacs-devel

Differential Revision:	https://reviews.freebsd.org/D32258

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

editors/emacs-devel: Update to latest master branch commit, 4f2b415

This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.

Submitted by:	ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23012

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

Update to 0.8.3.

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

Chase Emacs update

Update to 0.8.1.

Relinquish maintainership of most of my ports.

Don't set DISTNAME when using USE_GITHUB and MASTER_SITES=GH, the
framework already sets a unique DISTNAME.

With hat:	portmgr
Sponsored by:	Absolight

Update ports in the [bcd]* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

- Chase GNU Emacs updates

PR:		199553

- Chase GNU Emacs updates

PR:		194624

Cleanup plist

- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)

Fix the pkg-plist for devel/cask.

The template directory wasn't being removed.

Reviewed by:	swills
Approved by:	swills (mentor)

Add devel/cask.

Cask is a project management tool for Emacs that helps automate the package
development cycle; development, dependencies, testing, building, packaging and
more.

Cask can also be used to manage dependencies for your local Emacs
configuration.

Reviewed by:	bapt
Approved by:	bapt (mentor)