libLAS is a BSD library for reading and writing ASPRS LAS version 1.0 and
1.1 data. LAS-formatted data is heavily used in LiDAR processing operations,
and the LAS format is a sequential binary format used to store data from
sensors and as intermediate processing storage by some applications.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
devel/liblas: Remove conflict with liblas12
The conflict was solved in ports r467861 by suffixing all files
installed by liblas12 with 12.
PR: 227985
Submitted by: rhurlin@gwdg.de (maintainer of liblas12)
Approved by: wen (maintainer timeout, 6 months)
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Mark these ports as buildable on armv6 after a trybroken run. (Also
tested with trybroken on armv7.)
The 'runaway process' ones are most likely just statistical.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Reported by: swills
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
devel/liblas: unbreak build with boost 1.62 on 9.x
In file included from /usr/local/include/boost/atomic/capabilities.hpp:19,
from /usr/local/include/boost/atomic/atomic.hpp:19,
from /usr/local/include/boost/atomic.hpp:12,
from
/usr/local/include/boost/thread/pthread/once_atomic.hpp:20,
from /usr/local/include/boost/thread/once.hpp:20,
from src/../include/liblas/detail/singleton.hpp:49,
from src/../include/liblas/header.hpp:54,
from src/../include/liblas/reader.hpp:46,
from src/../include/liblas/index.hpp:45,
from src/../include/liblas/detail/index/indexoutput.hpp:46,
from src/detail/index/indexoutput.cpp:43:
/usr/local/include/boost/atomic/detail/int_sizes.hpp:137:2: error: #error
Boost.Atomic: Failed to determine builtin integer sizes, the target platform is
not supported. Please, report to the developers.
/usr/local/include/boost/atomic/detail/bitwise_cast.hpp: In function 'To
boost::atomics::detail::bitwise_cast(const From&) [with To = long unsigned int,
From = void*]':
/usr/local/include/boost/atomic/detail/atomic_template.hpp:556: instantiated
from here
/usr/local/include/boost/atomic/detail/bitwise_cast.hpp:39: warning: missing
initializer for member 'boost::atomics::detail::bitwise_cast(const From&) [with
To = long unsigned int, From = void*]::<anonymous struct>::to'
/usr/local/include/boost/atomic/detail/bitwise_cast.hpp: In function 'To
boost::atomics::detail::bitwise_cast(const From&) [with To = void*, From = long
unsigned int]':
/usr/local/include/boost/atomic/detail/atomic_template.hpp:574: instantiated
from here
/usr/local/include/boost/atomic/detail/bitwise_cast.hpp:39: warning: missing
initializer for member 'boost::atomics::detail::bitwise_cast(const From&) [with
To = void*, From = long unsigned int]::<anonymous struct>::to'
PR: 199601
Reported by: antoine (via exp-run)
Approved by: portmgr blanket
devel/liblas: fix [-fpermissive] cannot call constructor errors
The port doesn't build with gcc4.7+ without this patch. Partial log:
las_c_api.cpp: In function 'LASErrorEnum LASHeader_SetProjectId(LASHeaderH,
const char*)':
las_c_api.cpp:748:38: error: cannot call constructor 'liblas::guid::guid'
directly [-fpermissive]
las_c_api.cpp:748:38: error: for a function-style cast, remove the redundant
'::guid' [-fpermissive]
las_c_api.cpp: In function 'LASGuidHS* LASGuid_CreateFromString(const char*)':
las_c_api.cpp:1545:39: error: cannot call constructor 'liblas::guid::guid'
directly [-fpermissive]
las_c_api.cpp:1545:39: error: for a function-style cast, remove the redundant
'::guid' [-fpermissive]
Approved by: portmgr (bapt, implicit)
libLAS is a BSD library for reading and writing ASPRS LAS version 1.0 and
1.1 data. LAS-formatted data is heavily used in LiDAR processing operations,
and the LAS format is a sequential binary format used to store data from
sensors and as intermediate processing storage by some applications.
WWW: http://liblas.org/
PR: ports/124838
Submitted by: Wen Heping <wenheping at gmail.com>
