Remove expired ports:
2018-12-19 net/py-libstorj: Broken for more than 6 months
2018-12-20 net/xferstats: Uses obsolete glib12
2018-12-20 net/wmlj: Uses obsolete glib12
2018-12-20 net/ipsorc: Uses obsolete glib12
2018-12-20 net/bsdproxy: Uses obsolete glib12
2018-12-20 net/gini: Uses obsolete glib12
2018-12-21 net/netatalk: Outdated branch of netatalk; use net/netatalk3 instead
2018-12-20 net/nocatsplash: Uses obsolete glib12
2018-12-20 net/jags: Uses obsolete glib12
2018-12-19 net/scribe: Broken for more than 6 months
2018-12-20 net/libnetdude: Uses obsolete glib12
2018-12-20 net/nepim: Uses obsolete glib12
2018-12-20 emulators/generator: Uses obsolete glib12
2018-12-19 emulators/py-nova: Broken for more than 6 months

Deprecate most glib12 consumers

With hat:	portmgr

www/libwww: Update to 5.4.2, Fix security vulnerabilities

This a security release for libwww to take into account security advisories
CVE-2016-9063 and CVE-2017-9233.

In order to take into account current and future expat security advisories,
the expat source code was removed from the libwww tree. The makefiles were
modified so that libwww dynamically links against the system's expat library.

Patches removed were incorporated upstream.

Bump PORTREVISION of dependent ports due shlib change.

Changes:	libwww/5.4.2/ChangeLog">https://raw.githubusercontent.com/w3c/libwww/5.4.2/ChangeLog

MFH:		2018Q3
Security:	e375ff3f-7fec-11e8-8088-28d244aee256

Add a CONFLICT_INSTALL to report a conflict with net-im/gale.
Bump PORTREVISION

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Remove old libtool patch

devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
  didn't conflict with early development versions of glib/gtk 2.0

- Switch www/libwww to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

- Switch devel/liboop to USES=libtool, drop .la files
- Fix glib2 detection by adding USES=pkgconfig
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

Update maintainer email address

Approved by:	bapt@ (co-mentor)

- Add LICENSE
- Strip shared library
- Support STAGEDIR
- Pet Portlint
- While I'm here:
  - Remove leading indefinite article from COMMENT
  - Simplify Makefile
  - Sort PLIST

PR:		ports/184460
Submitted by:	Rodrigo Osorio <rodrigo@bebik.net> (maintainer)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- Fix plist

Reported by:	miwi@

- Trim Makefile headers
- Pass maintainership to submitter

PR:		175184
Submitted by:	Rodrigo (ros) OSORIO <rodrigo@bebik.net>

- Fix MASTER_SITES
- Support USE_TCL

PR:             162853
Submitted by:   Ports Fury
Feature safe:   yes

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

Sync to new bsd.autotools.mk

- Mark MAKE_JOBS_UNSAFE

Reported by:    pointyhat

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Use libtool port instead of included version to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Remove USE_REINPLACE from all categories starting with D

Fix the adns library version so it matches the internal soname.  This sets
the lib version back to 1, but since the dependencies still linked to
libadns.so.1 even when the installed file was libadns.so.12, a new
PORTREVISION bump is not needed.

- Bump adns library version and PORTREVISION after last dns/adns update
  for all affected ports.

Reproached by:  kris

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Add some SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

- Master site gone; switch to Gentoo distfiles mirrors
- Change WWW to site with fresher news

PR:             ports/88469 (based on)

change the libtool version to use from 1.3 to 1.5

Bump PORTREVISION to chase the glib20 shared lib version change.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

SIZEify.

USE_REINPLACE must be defined before REINPLACE_CMD may be used.

- Update to version 1.0

PR:             58623
Submitted by:   Ports Fury

Chase repocopies towards ports/dns

PR:             ports/56020
Submitted by:   Kimura Fuyuki <fuyuki@nigredo.org>
Approved by:    portmgr

Author has rerolled source tarball (Makefile.in is the only file that was
changed).

Remove USE_GNOMENG.

De-pkg-comment.

Update to 0.9

PR:             47475
Submitted by:   arved

Convert USE_GLIB into USE_GNOMENG+USE_GNOME.

Add USE_REINPLACE where appropriate.

GNU_CONFIGURE -> USE_LIBTOOL

PR:             39431
Submitted by:   Ports Fury

upgrade to 0.8   drop maintainership    

add liboop   A low-level event loop management library for POSIX-based OS